Boutonnieres on hand: a bright addition to the wedding look. DIY boutonniere from satin ribbons How to make a boutonniere from ribbon

When preparing for a wedding, it is not necessary to buy all the important wedding attributes in special stores or order from craftsmen; some products can be created with your own hands. For example, the groom’s boutonniere is a flower that matches the bride’s composition and is attached to the pocket or lapel of the jacket.

It is possible for the bride to create a similar bouton on her hand. They can be made not only from fresh flowers, but also from corrugated paper, or beads with stones and rhinestones, the main thing is that they are made in the same style. For a boy or girl, boutonnieres can be made as prom decorations.

Wedding flowers made from satin ribbons have now become popular; any woman, even if she has never started needlework before, can create such an attribute with her own hands, spending a minimum amount of time - just use our step-by-step guide.

Rose is traditional flower for decoration weddings and, in particular, the image of husband and wife. If the option with a living queen of flowers is removed due to allergies in a man or guests of the celebration, you can simply create a bud for a boutonniere with your own hands, and it will be almost no different from a real flower.

In addition, this option will look more unusual and will show that the bride wants to try for the sake of her beloved future husband.

• To create an open wedding bud, you only need a medium-thick satin ribbon, pins and a needle and thread. The color scheme of the material should be chosen based on the color of the man’s suit and the general decoration of the celebration. You can take a gradient paint, which is characterized by smooth transitions from light to dark colors.
• You will need to bend a small section of the tape on one side to form a right angle; for comfort, you can secure the workpiece with a pin. Then you need to fold the corner and bend the ribbon to it, creating petals of a certain splendor. When the rose reaches the required size, you need to cut off the remaining ribbon and secure the structure by stitching it from the bottom with threads.

Gallery: foamiran boutonniere (25 photos)

Peony from individual petals, master class

Peony is a flower noble birth, since in the distant past in the countries of the East only important people grew this plant on their plots. Now peony is found in almost all countries, and its popularity is only growing. From satin ribbons you can create an excellent artificial imitation with your own hands, very similar to the original itself. To do this you will need:

To create a peony from satin ribbons with your own hands, you must first create a pattern of petals. To do this, on a piece of paper you will need to draw a blank five centimeters high or a little less in the shape of a wide heart with the tip cut off on the straight side, the base should be about 25 mm.

Using this pattern, you need to cut out six identical petals, then reduce the workpiece by five mm, and cut out the next six parts, and then repeat the action again. As a result, we should have eighteen petals in three groups of different sizes.

Let's light a candle and burn each petal in turn on all sides over its fire. To do this, we slowly take the workpiece with our own hands and bring one edge to the flame, and when it is scorched, we immediately stretch it in all directions.

This is done so that the petal becomes wavy, similar to real petal. When all the edges have been completed and stretched, place the workpiece over the fire for a short time, holding it with tweezers so that it takes the desired shape.

In order not to spoil the cut out petals, let’s practice before working on the remaining extra piece of satin.

Then you need to make stamens, for this you need to cut a couple of pieces of wire about 5-6 cm long. On one end of each piece you need to squeeze out a drop of glue using a gun, then dip our stamen in glitter or small beads and create an even drop. When the stamen dries, you can additionally decorate it with transparent nail polish to get glossy surface.

The final step is to assemble the peony from satin ribbons together; to do this, we sew six large petals together at the base with our “needle forward” seam, leaving a hole in the middle for the stamens.

When the base is created, you need to put the holes created by the stamens inside and strengthen the structure. Then, still stitching it, from the wrong side. After this, all that remains is to sew on all the remaining petals, starting with the middle ones and ending with the small parts. So we have finished our master class, don’t be afraid to make crafts from foamiran, guests at the wedding will really like them. Even though the flowers are artificial, they will look as if they were alive.

Last boutonniere assembly: master class

When the main flower for the wedding is made from a satin ribbon, you can move on to making your own boutonniere from foamiran for the groom for the wedding. To do this, you need to thread a wire through the finished bud and bend it into the shape of a stem. To make the structure tight, you can thread two identical pieces of wire perpendicular to each other, and then also bend them down. The wire will need to be wrapped with a special green tape.

You can add various decorations to the main flower, for example, you can create it yourself decorative greens according to the principle of creating stamens or add leaves cut out and set on fire from a green satin ribbon. Having collected all the parts together, you need to create a single stem of the boutonniere from wire and our ribbon.

A boutonniere is an ornament made from ribbons or flowers that is placed in the buttonhole of the groom's jacket. This accessory, according to tradition, is used in different situations. For example, in ancient Greece, a boutonniere made with inflorescences and herbs scared away evil spirits. Later, it began to be used as an accessory for everyday men's suits. The modern boutonniere appears in wedding images, emphasizing the theme of the celebration and the unity of style.

Rules for making boutonnieres from ribbons

A boutonniere made with ribbons will never lose its freshness, so you don’t have to worry about its appearance. Artificial material is a lifesaver at winter weddings, when frost has a detrimental effect on fresh flowers. The ribbon allows you to create completely different compositions or use it as an addition to a classic flower. Initially, the word boutonniere meant “flower in the buttonhole” when translated from French. The prototype of this accessory was a small bottle with a miniature composition or one flower.

Modern boutonnieres are pinned to clothes; they can decorate a woman’s wrists and hairstyles. In most cases, this accessory is found on the groom's jacket. It is perceived as an essential component of the image. According to the rules, this attribute must be in harmony with the bouquet that the bride is holding. When compiling it, you should be guided by the following rules:

Think over the design, taking into account the theme of the upcoming event, the placement location, for example, on the arm, on the lapel.
Ribbon flowers should match each other and harmonize with the outfit.
You should not skimp on material; choose high-quality tapes. In addition, it is worth buying them with a reserve so that you can remake them.
Don't make the accessory too big.
The central flower should not be huge, taking up the entire lapel of the jacket, as this looks vulgar.
If you are going to supplement the ribbon composition with a sprig of a fresh flower, then choose one that will not cause allergies. Give preference to those specimens that have a minimum amount of pollen, and artificial materials should not contain easily sprayed coloring elements or dust.
If you decide to make ribbon accessories for all witnesses, you don’t have to make them the same. Even if they differ from each other, they are not superior in splendor to the one that adorns the groom.
The chosen color of the ribbons should be combined with the outfit and accessories.

How to make a boutonniere from satin ribbons for the groom

Making a boutonniere with your own hands using ribbons for the groom is not too long or troublesome. When you have decided on the main composition, you should collect all the decorations that will serve as an addition. Walk around your apartment and you will definitely find something interesting: rhinestones, buttons, beads, bows, wire, mesh, ribbons. If the stem of a living flower is inserted into the composition, it is better to play it safe and purchase several. After all, plants are very fragile and easy to damage.

Required materials

To create you will need the following:

matching threads, needle;
satin ribbons of one, two, or three colors, the width of which is 2.5 cm;
scissors;
candle;
decorative pin;
button;
ruler.

Stages of creation

We cut the ribbons into the following sections: 6 by 8.5 cm, 7 sections by 11 cm, 5 by 6 cm.

We seal the edges with fire so that they do not crumble. We carefully hold the burning candle over the braid.

We bend the 11 cm tape in the middle to form a right angle. We bend the edge that is directed to the right back, comparing it with the base. The first petal is ready.

We thread the base of the leaf with small stitches and lower it to the knotted end of the thread.

We do this with the remaining six pieces of ribbon. We collect the flower with threads and secure it tightly with a knot.

We will do the same with ribbons of 8.5 and 6 cm. Three flowers of different sizes are ready.

It is necessary to connect the flower by threading a thread through the center of the largest, medium and small.

Sew on a button. From the reverse side, a decorative pin is threaded through the boutonniere and attached to the jacket.

Master class on creating a boutonniere from ribbons for witnesses

It is possible to highlight witnesses at a crowded wedding with a boutonniere made using ribbons. This beautiful and easy-to-make accessory will liven up your outfit. You just need to carefully consider the attribute so that it complements the style of the wedding and harmonizes with the details of the image of the bride and groom.

Required materials

To create you will need the following materials:

fabric or braid;
button;
ribbon;
glue or glue gun;
thread, needle;
scissors;
iron.

Stages of creation

We fold the ribbon like an accordion. Make a fold every 2 cm. Fold until you have 10 folds.

We sew the accordion at one point from the edge: make a stitch, tie it with a knot.

We form a flower, directing each fold in one direction. We smooth it with an iron.

Cut a piece of tape 5 cm long. Glue it to the wrong side of the boutonniere.

You should attach a button to the center: you can use a ready-made one or cover a regular plastic or metal one with an interesting fabric.

Video tutorial on how to create a boutonniere from ribbons with your own hands

Making a boutonniere is an interesting and exciting activity. The use of artificial materials makes the process easier, because working with fresh flowers requires practice. The video below demonstrates the process of making a boutonniere from ribbons. There are many subtleties in its creation, but with a visual master class, the procedure ceases to be so daunting. Follow the basic rules and consistency and you will become the owner of a unique, luxurious accessory.

Let's consider the most sophisticated options.

Mini composition

How to make a boutonniere for the groom? The easiest option to create a mini-composition is to use one large bud and several branches with small inflorescences or berries. Many people prefer to choose a rose, lily or kala for this, which are suitable for almost any image, and the shade can be selected depending on the color of the groom’s suit.

To make a boutonniere, you will need the following materials:

• 1 large fresh flower (you can take several, with a reserve);
• sprigs of gypsophila or hypericum;
• green tape;
• floral wire;
• safety pin for fastening;
• scissors.

Before creating a boutonniere, you need to cut the plant stem at an acute angle and place it in water for at least 4 hours, this will allow the bud to stay fresh longer. It is advisable to decide in advance on the desired length; usually 1 cm of stem is enough to create a durable composition. It is recommended to dip a cut of a flower in liquid paraffin or wax so that there are no wet spots left on the groom’s suit.

Then you need to cut two pieces of wire approximately 7 cm long, pierce the stem crosswise with them as close to the bud as possible and bend them parallel to the stem. Additional plant branches also need to be strung on floral wire, bent on one side with a hook. Having collected all the elements together, you need to intertwine the wires together and wrap them tightly with tape. The finished boutonniere is secured with a safety pin.

Gypsophila and hypericum are more suitable for roses or peonies, and for lilies and callas it is better to choose greens without inflorescences, but with larger leaves.

In the form of a mini bouquet with lavender

If the wedding will be held in the style of Provence, rustic, vintage, or the newlyweds simply decided to hold the celebration in the fresh air, it is best to make a flower arrangement of wildflowers. In this case, lavender is often chosen as the base, which symbolizes admiration.

You can use lavender as a single composition, wrapping it in a kind of linen wrapper. In addition, you can add additional elements - spikelets of cereals, thin green blades of grass or small wildflowers in pastel shades. This boutonniere should not be weighed down with bright accents or large buds. You should not use wire; it is better to secure the mini-bouquet with twine or other suitable material.

Wedding planner

Just like a bridal bouquet, a boutonniere can be dried and kept in the family to remain a reminder of a happy day.

Elena Sokolova

Stylist

Unusual boutonnieres for the groom should be combined with the overall style and color of the image. For example, a boutonniere for the groom in blue will go with every suit.

Tatiana Vorobyova

From satin ribbons in the shape of a rose

A boutonniere for the groom made of satin ribbons is most often made in the form of a rose, since the result always lives up to expectations, even if a beginner takes on the task. There are many ways to make a bud that looks like a real one. For the simplest manufacturing option, the following materials will be required:

• ribbon of the desired shade;
• a needle and thread matching the color of the base;
• glue gun;
• lighter or candle.

The cut edges of the tape must be singed immediately so that the finished flower does not begin to bloom. Then the tape is placed with the wrong side up, 1.5-2 cm is removed from the edge, and the long end is bent at an angle of about 30 degrees so that the front side is on top. At the same angle, the tape must be bent again, but this time upward. This must be done until the tape runs out, so that the folds do not fall apart, it is advisable to fix them with pins.

Then the entire lower side must be sewn with a stitch “forward with a needle, but at the end do not make a knot, but pull the thread - the ribbon will begin to gather itself into a bud, all that remains is to give it the desired shape. The core should be dense, but the outer petals can be given any shape and volume. The folds need to be coated with glue so that the bud holds its shape. When it is ready, you need to make a knot in the thread and cut off the excess part.

You need to sew a wire frame to the wrong side of the resulting rose, then attach other decorative elements to it. These can be individual ribbons, feathers, artificial greenery, beads, etc.

The advantage of an artificial boutonniere for the groom is that you can create a composition of any shade, even if such plants do not exist in nature.

From ribbons - other decorations

Rose is not the only flower that can be made from ribbons. To make an original boutonniere, you will need the following materials:

• ribbons 4-5 cm wide in two shades - green for the stem and any other for the petals;
• stamens (can be purchased at hobby stores);
• fishing line;
• threads to match the color of the petals;
• green tape;
• candle or lighter;
• scissors;
• ruler.

Cut the ribbon for the buds into rectangles 6 cm long. For one flower you will need 3 petals; it is best to make a boutonniere from three inflorescences.

Scorch the edges of each segment. Place one rectangle wrong side up, with the long side facing you. Fold two corners towards the middle, stitch along the bottom side, tighten the thread, forming a petal. Cut off the excess part and singe the edge. Do the same with other rectangles.

Then you need to collect each flower, first forming a bud, and then placing several stamens in the center.

Having fixed the desired position, firmly sew the petals together from the wrong side. Sew a wire to the bottom of each bud, form a stem and wrap it first with tape and then with green satin tape. To give the flowers a finished look, you need to cut out a square of green ribbon for each inflorescence, fold it diagonally several times and sew it to the base of the bud, forming a receptacle.

Interesting video: accessory using the kanzashi technique

A boutonniere for the groom using the kanzashi technique will turn out very beautiful. The petals for each flower are made separately, glued for strength and joined together. The result is a delicate composition that is not inferior to natural plants. In the video master class you can see how to make such a mini-bouquet yourself.

To combine the images of the bride and groom with each other, it is advisable to make the bouquet and boutonniere in the same style, or even better, from the same flowers. If this option is not suitable, you need to select plants that are as similar in appearance or shade as possible.

• A boutonniere that is too large will make the look heavier. The composition should complement the groom's suit, and not distract attention to itself.
• First, it’s better to practice on spare colors, since not everyone can make the perfect option the first time.
• It is better to choose flowers without pollen, otherwise it may stain the suit, and for some people present at the wedding, allergies may worsen.
• It is also not advisable to use plants with a strong aroma, since the groom will have to wear the boutonniere all day.
• If done, such compositions should look more modest than the groom’s.

Resume

With the right amount of imagination and patience, anyone can make an original boutonniere that will emphasize the solemnity of the event. You can use not only flowers in the composition, but also any available materials, such as a boutonniere for the groom made of foamiran.

Kanzashi crafts are in trend today, so don’t give up the pleasure of learning this handicraft and making it one of your hobbies.

Take as your assistant step-by-step photos and a step-by-step master class on creating a miniature bouquet of tulips - boutonnieres made of satin ribbons and lace using the kanzashi technique. This composition is perfect as a decor for a children's suit or festive dress; it can also be used as a decorative bracelet or decoration for a hairband, headband, or bag.

Materials for boutonnieres and tools for work

To make a beautiful ribbon boutonniere with your own hands, prepare the materials. You will need:

• satin ribbon 2.5 cm scarlet;
• silk ribbon 2.5 cm in a soft blue shade;
• satin ribbon 2.5 cm deep green;
• milky lace 4 cm wide - 18 cm;
• three round sew-on (adhesive) rhinestones;
• a piece of felt measuring 5x5 cm;
• candle and lighter;
• scissors;
• polymer glue such as “Dragon” or “Titan”;
• ruler;
• white thread and needle.

If you are not at all familiar with this needlework and terms, look at the introductory one on our “Women's Hobbies” website.

Step-by-step manufacturing technique with photos

Take a piece of dark olive-colored felt measuring 5x5 cm, cut off its corners and carefully round it, making a regular circle from the square.

Take a piece of milky lace, a needle and thread. Sew with thread along the entire inside of it.

Pull both ends of the thread towards you. Make sure that the length of the inner stitched part of the lace is equal to the length of the perimeter of the circle.

Sew the lace into a neat ring and join the edges.

Glue a felt circle in the middle. The base for the satin ribbon boutonniere is ready!

To make green leaves, cut the satin ribbon into 9 cm long pieces.

Take one of the pieces and place it along a horizontal line, wrong side up.

At the points in the middle of the segment, fold the fabric forward and down. Mark the center point on the fold line. Fold the ribbon along the center point of the fold line forward. Shape the fabric into a neat petal.

Fold the petal in half lengthwise. Then fold the bottom side edges back towards the fold line. Form the fabric into a neat petal. Singe its bottom edge over the fire and press down with tweezers. One of the petals for the pillow is ready.

Working in this mode, make 7 neat bright green petals from satin ribbons for kanzashi tulips.

Glue the green petals in a circle onto the lace and felt base. Make sure that all the leaves are glued evenly and symmetrically.

In the next part of the master class you need to make tulips using the kanzashi technique. Cut 2.5 cm red and blue satin ribbon into 21 cm pieces (3 pieces in total).

Take one of the segments. Place the front side facing you. Stepping back 2.5 cm, bend it forward and down.

Fold forward along the line of the main tape. Secure the folded fabric with a pin.

Step back 2.5 cm again and fold the ribbon forward and down. Fold it back along the line of the main tape. We fix the bends with a pin.

In the same mode, step back 2.5 cm again, bend forward and then back, and secure with a pin.

For the fourth time, fold only the edges. Then lift the bottom edge up and secure both edges with a pin.

Take a needle and thread. Sew all the folds on the ribbon on the outside using a basting stitch.

Pull the threads towards you, tie them and sew the bottom of the bud.

Using this technique, make two more buds. In total you should get three kanzashi tulips: two bright red and one pale blue.

To decorate a boutonniere made of satin ribbons, sew or glue rhinestones into the middle of the buds.

Attach the buds on top of a cushion of green petals and lace.

The boutonniere using the kanzashi technique “Tulips” is ready! Wear with pleasure and receive well-deserved compliments from friends and acquaintances. Such compositions can be made for gifts on March 8, replacing them with fresh flowers.

If you liked this master class, make other decorations according to our instructions from.

But also take care of accessories. For example, make artificial or living boutonnieres with your own hands.

The boutonniere for the groom should be designed in the same style as. This symbolizes the union of two hearts, and the fact that from now on the man and woman belong to each other. What to look for when choosing this important accessory and how to make boutonnieres from ribbons with your own hands - this will be discussed in the article.

History and types of jewelry for the groom

In Ancient Greece and Rome, flowers were always used as decorations at various holidays, including making wreaths for the winners of competitions. Many ancient wedding customs also suggested that the bride presented her chosen one with a small bouquet of flowers, which served as a talisman. This custom formed the basis of the modern tradition of pinning jewelry on the groom at a wedding.

The word "boutonniere" translated from French means "flower in the buttonhole." The etymology of the name is associated with the French Revolution: people sentenced to execution expressed their courage in the face of death by decorating their chest with a flower with a buttonhole. Subsequently, representatives of social life began to pin the flower to their outfit. And the first groom to use a boutonniere in his wedding look was Prince Charles.

And they are associated with various signs. It is believed that they should be kept in the family throughout life and act as guardians of family well-being.

For example, if a child is sick, then you need to cover him with a veil or put a boutonniere under his pillow. These elements also serve as protection against the evil eye. If you make a boutonniere with your own hands from ribbons, it will last for a long period.

There is no classification of accessories as such: they can only be divided into natural and artificial specimens. The former are created from fresh flowers, and the latter from paper, fabric, ribbons, polymer clay, beads, buttons, feathers and other materials. There is also an intermediate option - these are dried flowers - dried inflorescences of plants.

Wedding planner

Textile accessories retain their original appearance for a long time. Living ones look very romantic and tender, you can feel life in them, and dried flowers will not fade and can be kept as a keepsake even after the wedding.

Elena Sokolova

Fortune Teller

The boutonniere is created taking into account the fact that each plant has its own strength. Lily - promises a life of abundance, rose - love and passion, forget-me-not and chamomile - fidelity and devotion, peony - health and longevity.

Tamara Solntseva

A solution for the brave

If the newlyweds have chosen a stylized wedding, then, as a rule, both the bride’s dress and the groom’s suit differ from traditional outfits. Accordingly, all accessories should also be unusual. Making a boutonniere with your own hands should take into account the style of the celebration, the groom’s taste preferences, and his hobbies:

• made of feathers, ribbons or buttons will complement the groom's image on;
• made of small shells, decorated with an anchor and pearls, will express your love for the sea and will become a bright accent at a marine-themed wedding;
• with animal figures, he will talk about the touching love for nature and the groom’s care for our little brothers;
• in the form of sweets or an accessory decorated with sweets will become a symbol of the sweet and happy life of the spouses;
• with a small guitar, camera or car, they will eloquently talk about the newlywed’s hobby;
• an accessory for athletes in the form of a soccer ball or boxing gloves will demonstrate the character and willpower of the newlywed;
• with images of characters from your favorite films or comics, it will tell you about the groom’s preferences and will look original during the photo shoot.

Basic rules for attaching an accessory

Historically, wedding boutonnieres were usually attached to the left lapel of the jacket. But if the tail is not draped, then it is better to fasten it with a pin near the pocket on the chest to hide the unaesthetic part.

Attention! According to customs, the floral accessory is attached after the bride's ransom. The groom presents his future wife with a bouquet, and she, as a sign of reciprocal love, attaches a flower to him from the side of her heart.

By the way, friends of the newlyweds can also add such decoration to their wedding outfit. You can make wedding boutonnieres with your own hands from satin ribbons, it will turn out unusual and original.

Just remember that married men attach them to the right, and bachelors - to the left. Bridesmaids often attach the accessory to their wrist, like an original bracelet.

A simple way to create decorations from fresh flowers

A do-it-yourself boutonniere made from fresh flowers can transform the image of the groom in a classic style and make it more romantic. As a rule, the decoration is made from one flower or several. Most often, when making wedding boutonnieres with your own hands, the following plants are used:

• roses– flowers that can easily fit into any style;
• wild flowers– simple, but no less interesting plants that will be relevant for a summer wedding, celebration in a boho or rustic style;
• peonies– delicate flowers that are suitable for a spring wedding;
• anemones– amazing plants that amaze with the variety of colors and shapes of buds;
• succulents– exotic plants that look very unusual.

A flower arrangement on the groom's jacket will look bright and festive only when the bouquet is fresh. To make living plants smell longer, it is recommended to make a boutonniere on your wedding day or the night before. The finished accessory can be stored in the refrigerator by placing it in a bag filled with air. Florists also advise dipping the stem cut diagonally into warm wax so that the flower has moisture.

If you couldn’t buy a suitable option, we make a boutonniere with our own hands. To do this, you need to cut the stem of the rose so that its length is no more than 3-4 centimeters. It is necessary to remove the thorns and leaves and place the flower in water for a few minutes.

Then, piercing the base of the flower with a thin wire, lower its ends down parallel to the stem. After this, the stem is tightly wrapped with a special green tape to retain moisture. To make the accessory look more harmonious, you can add gypsophila.

Practical and stylish

The advantages of an accessory made from artificial flowers are obvious: the boutonniere retains its original appearance and does not wrinkle; it is convenient to fix it on a jacket. A flower arrangement can be used for a celebration in the winter season or in sultry heat, since in both cases the use of fresh flowers is not possible.

In addition, a boutonniere made of artificial flowers, decorated with various decorative elements, will help create an original, memorable image. The bride can make such an accessory for her chosen one. To create a flower arrangement you will need: beautiful fabric, wire, glue, scissors, ribbon for tying the bouquet.

A square piece of fabric is cut out and folded in half. Then again and again until you get a triangle. The technique itself is reminiscent of folding when cutting out paper snowflakes. The corners of the triangle are trimmed and rounded. After unfolding the material, you can see that the result is a flower. Then, from the wrong side in the center, the fabric is pinched and a wire is wound onto it.

Next, a leaf for the flower is made from a piece of green fabric. Glue is applied to the material from the wrong side, wire is applied and the fabric is folded in half. After the glue has dried, the excess material around the wire is cut off. Finally, the elements are fastened together, and decorative tape is used to disguise the wire. Congratulations! Now you know how to make boutonnieres for a wedding with your own hands.

Made from satin ribbons - beautiful and original

Recently, various decorations made from satin ribbons have become very popular. This trend has also not bypassed wedding fashion. Needlewomen will be able to make a boutonniere with their own hands from satin ribbons. Flowers can be created in several ways:

• from a simple satin ribbon of medium thickness;
• from individual petals, which are cut out according to a satin ribbon pattern;
• made of satin ribbon using the kanzashi technique.

The bride can please her chosen one and present him with an accessory made with her own hands. To create it you need to take: thread, a needle, satin ribbons of different colors 2.5 cm wide, scissors, a lighter or candle, a pin, a button and a ruler.

The ribbons are cut into pieces 8.5 cm long (6 pieces), 11 cm long (7 pieces), 6 cm long (5 pieces) and sealed with fire at the edges. A segment of 11 cm is bent in the middle at a right angle. The edge, which is directed to the right, is bent back, comparing with the base. This is the first petal. Several stitches are passed through its base and lowered to the end of the thread. The same is done with other pieces of ribbon of 8.5 and 6 cm, collecting the petals on a thread and creating flowers.

The result is three flowers of different diameters, which are connected to each other by overlapping and threading a thread through the center. Then a button is sewn on top in the middle of the smallest bud, and a small pin is attached to the wrong side of the decoration.

Useful video: master class

Below is a video on how to make boutonnieres for a wedding with your own hands:

Resume

As you can see, there are many options, there is room for imagination and creativity to run wild. Choose any, because the most important thing is harmony: combination with the bride’s bouquet will symbolize love and the union of two hearts.

By the way, a DIY paper boutonniere is an excellent option for those who want to preserve the memory of a special event for many years. Which option to choose in the end is up to you to decide.