How to make the most beautiful Christmas tree. What can you make your own Christmas tree from? DIY paper Christmas tree
The original beautiful Christmas tree will decorate the festive interior. Of course, you can’t dance around her, but such a miracle will definitely lift your spirits. This interesting tabletop craft can be made from the simplest things that are found in every home.
Required materials:
- A4 sheet, cardboard;
- dense threads (preferably wool mixture);
- 2 “yolks” from kinders;
- wooden sushi sticks;
- plasticine;
- foam;
- stationery knife;
- stroke corrector;
- red nail polish;
- PVA glue;
- fabric scraps;
- little things for decoration.
Make the frame of the future Christmas tree from A4 sheet - roll it into a ball. Insert foam inside.
Apply glue to the surface of the cone in thin strips and wind a thread around it.
Secure the end of the thread with glue.
Sushi chopsticks will serve as legs for our beauty. To do this, they need to be painted with a corrector.
While they are drying, make boots from the “yolks”, as shown in the photo.
Fill them halfway with plasticine and wrap them in cloth.
Insert the stick legs into the boots, decorate the Christmas tree with various bows and ribbons. Paint stripes of legs with red varnish. ready!
You can make a hat out of cardboard, cover it with fabric and sew on a pompom.
DIY shabby chic style Christmas tree
Let's make this amazingly beautiful and original craft V fashionable style shabby chic.
Required materials.
For the base, take a large paper glass or any plastic dishes. Separately, dilute alabaster or gypsum with water to the thickness of liquid sour cream and pour it into the future pot. We secure the trunk of our tree, plant the branch in the center and fix it in this position until it hardens.
We make a cone out of cardboard using a stapler.
We make the top of the spruce from wire and foam rubber.
We connect the top to the trunk and attach the cone.
We wrap the base of the tree with white fur.
We cut off the excess from below.
Then we bend the ends of the burlap inward and attach it with hot glue.
Let's get to the fun part - decorating our Christmas tree in shabby chic style.
To create the finished composition we will need a stand.
We make a bench from a bamboo napkin.
From white fur - a snowman.
We attach a bell to the top of the spruce.
We decorate the New Year tree with beads, pearls, flowers, lace, etc.
Apply transparent glue to the very top of the tree.
And sprinkle with artificial snow.
We do the same with the bench.
Our composition " Winter's Tale"Ready!
Decorative Christmas tree made from napkins
We will make it from cardboard and single-layer napkins. You will also need beads for decoration.
First of all, let's build a frame for our Christmas tree. We roll a cone out of cardboard, fasten it (I stitched it with thread) and cut off the bottom of the cone exactly so that it can stand.
The base is ready, put it aside for now. Now let's move on to napkins. We will make roses from them. Single-layer plain paper napkins are suitable for us.
Take a napkin and cut it along the folds. Then we fold it in three and cut along the folds again.
We fold the resulting strips in three and cut them again. We got a square equal to 1/9 of a napkin.
We fasten this square in the center with a stapler.
Then cut a circle out of it. Mega-precision and accuracy are not required here at all; the finished rose can be slightly adjusted with scissors.
This way a rose is formed. If the finished rose seems uneven to you, you can trim it with scissors.
The number of such flowers depends on the size of your cardboard cone. My Christmas tree was 21cm high and I needed 59 roses for it.
When all the flowers are ready, we return to the cone. Starting from the top of the head, glue the flowers onto the cone so that the base is not visible. I glued it with hot glue (it’s more convenient for me), but ordinary PVA will do.
I made a Christmas tree out of napkins of two colors. If you also decide to create your own craft from multi-colored roses, then you can safely experiment with alternating them on a cone. If the result does not suit you, you can always tear off the flower and re-glue it to another place. In this case, only the lower layer of the flower will be damaged. We simply tear it off (the bottom layer). The rosette will not lose its appearance.
So, we glued the flowers to the cone. The Christmas tree itself is ready and you can stop at this stage.
I also decorated it with beads - I glued it with the same hot glue, PVA won’t help here.
DIY decorative Christmas tree made from napkins
As you can see, even a beginner can make such beauty, so you can safely involve children in the process.
Another option for a Christmas tree made from napkins
Crafts made from cones, balls, ribbons and beads
How to make such a craft - watch the video tutorial at the end of the article.
Christmas tree made of plasticine with candies
What do we all associate with wonderful holiday New Year? With the smell of pine needles, bright lights, garlands, sweets. And children also create unusual crafts with their own hands, thereby bringing the pleasant moment of the onset of a fabulous night closer. They love creativity lessons on this topic most of all. It is in crafts that you can realize any fantasies.
We suggest making an elegant Christmas tree that can be easily decorated with candies. Make a craft from plasticine - the cheapest and most popular material. You will definitely make a beautiful souvenir if you follow our tips - they are not complicated.
To sculpt a Christmas tree with your own hands, prepare:
- green plasticine for the crown;
- stump in the form of a cap or an empty spool of thread;
- toothpick, red and white plasticine for candy.
Select a green block of plasticine from the set. The body of the Christmas tree itself will be made from it, and in the future we will make small candies as toys. Of course, a small souvenir does not have to be green; another color that you choose will do. If you manage to find a set on sale that contains a gold bar, then this option will look rich.
Knead the entire prepared block thoroughly in your hands and prepare it for further work. It is necessary to form a cone-shaped crown, and not quite the usual flat one, but a curved one, similar to the cap of a fairy-tale gnome. Since we're talking about about a magical holiday, it is not forbidden to fantasize and create something incredible.
Pull all the soft plasticine into a long cone. Make the upper part as sharp as possible, press the lower part around the circumference with your fingers, showing the skirt. Then take and bend the entire structure to the side. Sometimes the Christmas trees do not stretch up perfectly straight, but lean to the side like this.
To model Christmas tree decorations - small candies - use white and red plasticine. Form red round tablets (the inner part of the candy), as well as white triangles (the twisted part of the candy wrappers).
Glue delicious candies together. Glue a white dot onto each red round piece and press it in the center with a toothpick. Glue the triangular pieces on the sides.
Make enough decorative details to fill the entire surface of the Christmas tree, evenly distributing the candies around the circumference at some distance.
Glue all the resulting blanks to the crown. Beautiful New Year's craft it's almost ready. Press down a small lid - a stump - from below (or mold it from plasticine).
And the top is still missing. She just begs to be added to the resulting fairytale Christmas tree. Come up with some option, for example the same spruce branches in combination with red berries. All this looks festive and bright.
This is such a fantastic Christmas tree. This is an elegant version of crafts for the New Year, which will become a great gift for your favorite holiday.
The New Year is just around the corner - you need to hurry up to get everything done.
How to make a card like this.
DIY felt Christmas tree
Let's make Christmas trees from felt - this is an excellent New Year's decoration and perfect for school or kindergarten.
Prepare for them:
- Set of colored felt;
- cotton wool;
- glue "Moment" transparent;
- any beads;
- threads for knitting and sewing;
- a needle;
- scissors;
- felt-tip pen.
Choose appropriate felt colors. These can be different shades of green. Or you can show your imagination and make an unusual red or blue spruce. Fold a couple of sheets of felt together and draw the shape of a fir tree on the top one.
Cut a piece of felt with a pattern along its entire length and fold it in half as shown in the photo. We do this only if the felt is not very thick, otherwise it will be difficult to cut 4 layers at once.
Cut 4 blanks into shape.
To give them a bulge, put a little cotton wool, as shown in the photo.
Lubricate the edges of the workpiece with glue.
Cut a piece of knitting thread and attach it to the top of the workpiece, directly on the glue. It can be hung from it. Attach the second piece and press along the edge so that both parts stick together.
On a light Christmas tree, make stitches with threads of a darker green color. This will add originality to the craft.
Decorate the second with a border of pearl beads. To do this, make a layer of glue along the edge and place beads on it.
Now let your little one decorate them however he or she wishes. After drying, the craft is ready for use.
This simple craft will be a great decoration for your Christmas tree. It can be given to grandparents. Older children will be able to do it completely on their own. Using this principle, you can make any felt decorations. Whatever your imagination suggests.
From natural materials DIY video tutorial with foamiran flowers
Christmas tree sachet - to create a festive aroma
A sachet is a small bag filled with dry fragrances that is used to create a fragrant background in a clothes closet or chest of drawers. If you place such fragrant bags on shelves with things, a pleasant and subtle smell will settle in your closet.
Making such a sachet with your own hands will not be difficult, and if you create it in the form of a New Year tree, then in addition to the aroma, the festive composition will also set the appropriate mood.
Materials for the master class:
- Citrus peel;
- orange essential oil;
- threads, needle;
- beads, beads, sequins;
- satin ribbon;
- green cotton fabric;
- scissors and pencil.
Draw a spruce template on a piece of paper and cut it out.
Finely chop the citrus peel, and to add a greater aroma, you can also add a few drops of essential oil.
From thin green cotton fabric, cut out two blanks according to the template, fold them with their right sides inward and baste.
If possible, sew and finish the edge on sewing machine, if this is not possible, process the edges manually.
Turn out.
Make a loop from a silver thread with a voluminous knot at the end, using a needle or hook, thread the loop into the top of the spruce.
Tie a satin ribbon into a bow and secure it at the top with a couple of stitches.
We fill the craft with aromatic citrus peels and sew up the edge.
If desired, you can decorate the sachet tree with your own hands with various beads and sequins.
Our affordable and easy-to-make sachet is ready, now its aroma will delight and beautiful appearance will give you extraordinary and festive energy.
Photo of Christmas tree sachet with orange scent
Christmas tree toy made from pasta
Brisk trade will open on city streets in December Christmas trees. It would seem that we should rejoice at such an abundance of New Year's markets, but often we feel sincerely sorry for the green beauties cut down at a time when they were just beginning to grow. Fortunately, many people are now purchasing artificial plastic trees or even making them at home from the most unusual means at hand - lemonade bottles, balloons, tinsel, pine cones and even books! Today we will share with you new information, from what and how to make a Christmas tree with your own hands for the New Year 2018, how to decorate it, what crafts you can bring to school and kindergarten for the competition. From our master classes with step by step instructions and photos you will learn how to make a green miracle from paper and cardboard with your own hands, cotton pads, threads and ribbons.
How to make a Christmas tree from ribbons with your own hands for school step by step: a master class at home for the New Year 2018
There are probably no materials left that folk craftsmen have not tried to make Christmas trees. Everything is used - from cones and paper sheets to soft toys and beads. But perhaps you haven’t heard yet how to make a DIY ribbon Christmas tree for school at home. Then this video and master class is for you!
Video master class on making a Christmas tree from ribbons
After watching the video below, it will become clear to you how to make a small Christmas tree with your own hands in normal home conditions for school from satin ribbons. This elegant mini-tree will need to be decorated with artificial pearl beads or large beads. However, this video master class will be useful only to those who know how to deal with small details and are accustomed to making small crafts.
How to make your own Christmas tree from paper or cardboard at home for the kindergarten for the New Year 2018
Before the New Year, teachers often give preschoolers simple tasks - they invite the children to make something for the upcoming holidays: a gift box, a snowman made of cotton wool, New Year's toys. Perhaps, after reading our recommendations and watching photos and videos of master classes, parents will be able to explain to their daughters and sons how to make a Christmas tree for kindergarten with their own hands from paper or cardboard at home.
Master class on making a Christmas tree from paper with step-by-step photos
You've probably seen how diligently kids make different paper crafts for the holidays. How enthusiastically the eyes of the children shine when they realize that everything is working out just fine for them! This simple master class with step by step photos will explain to you how you can make a Christmas tree at home kindergarten— crafts are made with your own hands from paper or cardboard. In addition, you will need:
- Pencil;
- Scissors;
- Tinsel;
- Fluffy wire;
- Glue;
- Sequins;
- Rubber;
- A stand with filler or a large decorative candle.
How to make a Christmas tree with your own hands at home for school for the New Year's craft competition 2018
Before the New Year, schools often ask children to bring them to class. homemade toys on New Year theme. At the same time, the most popular product is always the Christmas tree. If you want to know how to do the best Christmas tree with your own hands at home and win a crafts competition at school, read our instructions, remember the recommendations of the master classes, watch the video with explanations.
Crafts New Year tree for a school competition - Master class with photos step by step
The most talented children always participate in school competitions. Fighting for a prize, they think through the most unexpected, original products in advance and look for suitable materials for them. After reading how to make a Christmas tree with your own hands at home for a school crafts competition, the children will be able to make unusual New Year trees. They can decorate both the classroom and the shelf with souvenirs. Carefully read all the instructions in the master class and get to work.
The Christmas tree can be made in another way. Just stick bright paper ribbons onto the cone until you get such a miracle.
How to make a Christmas tree from cotton pads at home with your own hands: master class with photos
Did you still think that cotton wool pads sold in supermarkets and pharmacies are only sold by ladies who use them to remove makeup? No, they are also purchased by folk craftsmen and amateurs unusual crafts. If you want to make a fluffy New Year's beauty covered with snow, read how to make a Christmas tree from cotton pads at home with your own hands: a master class with photos will explain all your steps. The size of the product will depend on the size of the Whatman paper for the craft.
Christmas tree made from cotton pads step by step - Master class with photos of children's crafts
Having learned how to make a beautiful Christmas tree from ordinary cotton pads at home with your own hands, by turning to our master class with photos and explanations, you can surprise all your friends and family. It’s rare to see an artificial spruce of such beauty! Try to do it yourself.
Before starting work, prepare:
- Whatman sheet;
- Glue stick;
- Stapler;
- Lots of cotton pads;
- Scissors;
- Band-Aid;
- Decorations for finished crafts.
How to make a Christmas tree with your own hands from threads at home for the New Year 2018: video master class with explanations
Among all the Christmas trees, made from the most unusual materials Probably the lightest tree in terms of weight is considered to be a thread tree. Well, what about ak at home to make a simple but durable and beautiful Christmas tree with your own hands from threads, a video master class with explanations from the author of such an unusual craft will explain.
DIY Christmas tree made of threads: master class on video at home
In order to surprise your friends who come to visit you for the New Year, watch how to make a Christmas tree with your own hands from threads at home: a video master class with explanations will give you all the necessary tips. This craft is quite inexpensive, and it always looks amazingly airy!
How to make a Christmas tree with your own hands from tinsel to celebrate the New Year 2018: step-by-step instructions with photos for kindergarten and school
We often feel sorry for cut down Christmas trees, so many are looking for an alternative to the real thing. New Year's tree. It could be an artificial homemade spruce made from shiny decor. Having learned how to make a Christmas tree with your own hands from tinsel for 2018, you will give up the idea of going to the Christmas tree market.
Christmas tree 2018 made of tinsel - Master class with photos and instructions
Having prepared inexpensive, accessible materials and tools, and remembering how to make a chic Christmas tree with your own hands from shiny tinsel for the New Year 2018, you can get to work. Just in case, let the page with the master class and instructions for making the craft open on it.
How to make a Christmas tree with your own hands step by step from available materials and books: a master class for children for the New Year 2018
How can you imagine modern Christmas tree schematically? Essentially, it is a triangular, colorful structure, decorated with shiny decorations, beads and garlands. Some craftsmen manage to make spruces even from glossy magazines! We will tell you how to make a Christmas tree with your own hands from available materials and books.
Christmas tree from books - Master class with step-by-step photos
After getting acquainted with a master class explaining how to make the most unusual Christmas tree with your own hands from various improvised means and books available in your home library, you will understand that such an activity will bring you true pleasure. Well when you last time Have you held thick volumes of novels in your hands? Now you will do it with pleasure!
What to make a Christmas tree from with your own hands: master class on crafts from pine cones
The most “alive” Christmas trees are those made from natural materials. If you really want to know what you can use to make a realistic Christmas tree with your own hands, a master class with explanations on how to create crafts from pine cones will help you prepare for the New Year 2018.
Christmas tree for the New Year 2018 from pine cones - Master class with instructions
If you are looking for something to make a Christmas tree with your own hands, the pine cone crafts master class, or rather, each of its instructions, will answer all your questions. In addition to dense, but fully opened buds, you will need the following:
- Thermal gun;
- Hot glue;
- Scissors;
- Cardboard;
- Flowerpot;
- Tinsel and toys;
- A can of white or silver (gold) paint.
Let us immediately make a reservation that you can choose any size of spruce. Of course, it will take more than a dozen pine cones to make a large tree.
What can you use to make a Christmas tree for crafts for the New Year 2018 and how to decorate it
Having decided that under no circumstances will you buy a felled tree at the Christmas tree market, thinking about what you can use to make a Christmas tree for crafts for the New Year 2018 and how to decorate it, refer to the master classes presented on this page. One of them tells how to make a cotton Christmas tree. When following step by step instructions home craftsmen always end up with a fluffy white beauty!
White fluffy Christmas tree made of cotton wool - Master class with photos
If, after much thought about what you can use to make an original Christmas tree for crafts for the New Year 2018 and how to decorate it in an unusual and bright way, you have decided that the cheapest option is for you, read our master class and look carefully at its photo. Create a beautiful Christmas tree using ordinary cotton wool!
How to make a Christmas tree with your own hands from plastic bottles and how to decorate it
Sometimes we, throwing away seemingly completely unnecessary things, do not realize that you are sending valuable building material for the most unusual crafts to the trash heap. Having learned how to make a Christmas tree with your own hands from plastic bottles and how to decorate it, you will most likely reconsider your attitude towards some “garbage”.
Green Christmas tree made from plastic bottles: master class with explanations
Probably, after drinking lemonade or Sprite, you throw the used bottle into the trash without regret? In vain. If you are looking for what to give a friend for the New Year, our master class with explanations on how to make an original green Christmas tree with your own hands from plastic bottles and how to beautifully decorate it will help you in choosing a gift for the holiday.
For work, prepare:
- Green plastic bottle;
- Scissors;
- Cork plug;
- A candle;
- Glue;
- Foam rubber;
- A small plastic cup for yogurt or mousse.
Now, having familiarized yourself with several wonderful master classes explaining how to make a Christmas tree with your own hands from various available materials, including plastic bottles, ribbons, cones, tinsel, books, threads, cotton pads and paper, you and your child can make excellent crafts for the New Year 2018 in kindergarten or school. Perhaps your product will take first place in the competition, and all competitors will begin to puzzle over what you made such beauty from.
To become the owner of a Christmas tree, you don't have to buy it- you just have to look into useful tips and find out how you can do it beautiful Christmas tree with your own hands.
Today you can find many Christmas trees in shops and on the street.
You can put it in the house a natural Christmas tree or branches from a Christmas tree for scent, but to decorate the house, or a gift to a loved one can be done if you know a few interesting tricks.
Find out how to make a Christmas tree from paper, food, fabric and even pasta.
Make a craft like this not difficult at all, and your home will be decorated with unique decor, and friends and acquaintances will be happy to receive a Christmas tree made by you as a present.
DIY paper Christmas tree. Christmas tree made from scraps of magazine pages.
You will need:
Unnecessary magazine or book with bright drawings
Cardboard or thick sheet of paper
Glue gun or PVA glue
Shaped hole punch, optional
Pencil or pen
1. Make a cone out of a thick sheet of paper and secure it with glue.
2. Prepare pages from a magazine with bright pictures and cut out many circles of the same diameter from them. If you have a shaped hole punch (shaped like a flower or a large circle) it will be easier.
3. Wrap the cut circles around a pencil so that they curl a little.
4. Starting from the bottom of the cone, begin gluing the folded circles.
Make neat rows. The circles should be tightly glued to each other so that the cardboard is not visible.
5. Make a small cone from one circle and glue it to the top of the cardboard cone.
The Christmas tree is ready!
DIY Christmas tree made from pine cones and dried citrus fruits
DIY Christmas tree (master class). Christmas trees made of wrapping paper.
You will need:
Large thick sheet of paper
Wrapping paper
Double tape
Scissors
Decorations
1. Make a cone out of a sheet of thick paper.
* If your wrapping paper is quite thick, you can bypass step 1 and make a cone out of wrapping paper.
1.1 Fold the paper diagonally, holding one end to keep it sharp.
1.2 Secure the paper rolled into a cone with tape. You don't need to do everything too carefully, since you will cover the cone with wrapping paper.
1.3 Trim off the excess at the bottom of the cone to create a smooth base.
2. Prepare a colorful wrapping paper and cover the cone with it. To do this, place the paper on a flat surface with the pattern facing down.
2.1 Using tape, attach the end of the construction paper to the top of the cone.
2.2 Begin to slowly twist the cone while wrapping it in the wrapping paper. You need to wrap the cone tightly.
2.3 Measure the paper and cut it before completely wrapping it around the cone. Glue double tape to the edges and connect to the other end. You need to cut off the excess at the base so that the paper is even.
3. All that remains is to decorate the Christmas tree as desired. You can do it paper stars, use glitter, stickers, glue beads and/or buttons, wrap with ribbon, etc.
Similar Christmas trees:
DIY fabric Christmas tree. How to make a Christmas tree from felt.
You will need:
Glue or double tape
Scissors
* Try using two colors of felt to make the Christmas tree even more beautiful. In this example, yellow and orange felt was used.
1. Make a cone out of cardboard. Secure the ends with glue or double tape.
2. Prepare felt and cut circles of different diameters from it, from small to large (see picture). You can use pre-prepared circle templates made from cardboard.
3. Glue Christmas tinsel to the bottom of the cone.
4. Now you need to make a crosswise cut in the center of each circle cut out of felt. Do not cut too much to prevent the felt garment from falling off. Make the cut just enough to fit the circle tightly onto the cone.
5. Start gradually putting circles on the cone. If you are using two colors, then put on the circles sequentially, first one color, then the other. Also worth noting. What to put on the next circle is not only on the cone, but also on top of the tips of the cuts of the previous circle.
6. We decorate the top of the Christmas tree. To do this, simply add tinsel, onto which you will need to add a pre-prepared small felt cone. Secure the tinsel and crown with glue.
* If you wish, you can hide a sweet gift inside the cone.
Original DIY Christmas trees. Glowing Christmas tree.
You will need:
Floral mesh (preferably several shades of green)
Scissors
Cardboard for cone
PVA glue
Cellophane
Pins
Garland
Floral wire
Decorations upon request
1. Make a cone out of cardboard.
2. Wrap the cone in cellophane.
3. Take any container and make a solution of PVA glue and a small amount of water in it
3. Prepare a floral mesh. Cut it into small pieces and place each one in a container with the solution.
4. Start gluing the pieces onto the cellophane-covered cone. Glue different shades mesh sections in different directions. The joints should be coated with another layer of glue for a more durable attachment.
5. Secure the entire structure with pins and wait for the glue to dry.
6. You have now created the first layer of the Christmas tree. Now you need to make a second layer in the same style. After gluing the second layer, leave the structure to dry.
7. Now remove the Christmas tree from the cone - the glue should quickly come away from the cellophane.
8. Place a garland inside the tree, which must be secured with floral wire.
9. All that remains is to decorate the Christmas tree to your liking.
DIY Christmas trees (photo). DIY pasta tree.
You will need:
A cone made of plastic or foam (or you can make it yourself from cardboard)
PVA glue
Pasta of various shapes and sizes
Spray paint, acrylic paint or gouache
Brush.
1. Prepare a cone and paint it the desired color. Wait for the paint to dry.
*If you are using spray paint, you can skip this step.
2. Prepare the pasta. Start applying glue to each piece and gluing the pieces to the cone. Design your Christmas tree as your imagination dictates.
After applying the glue, press the piece a little and hold it so that it sticks well to the cone. It's okay if the glue is visible from under the pasta.
Continue until you have covered the cone with pasta. Wait for the glue to dry.
3. Start adding color to the pasta. In this example, acrylic paint was used. Try to paint all the parts carefully so that there are no empty spots.
* It is advisable to paint in two layers.
* If you paint it with white paint, the Christmas tree will look like a porcelain product.
Helpful tip: If you want to remove the craft, then put it in a plastic bag first, so you can immediately find the part that might have come off the cone.
We make a Christmas tree with our own hands. Bright paper Christmas tree.
You will need:
Colored cardboard or designer paper
Thick cardboard
Glue moment or glue gun (with hot glue)
1. Cut a square base for the tree from thick cardboard.
2. Insert the skewer into the cardboard and secure with glue.
3. Now you need to cut out circles of different diameters from designer paper or colored cardboard. You need to make 3 circles of the same size.
For example, you want to make 10 circles different sizes, then you will need to cut out 30 circles (3 for each size).
*If you don't feel like cutting out a lot of circles, just shorten the skewer and you'll end up with a cute mini Christmas tree.
4. Make a small hole in the center of each circle.
5. Before you start putting the circles on the skewer, lubricate the hole in the middle with glue.
6. Start placing the circles on the skewer, leaving a little space between them.
7. Cut out stars from paper and attach them with glue to the top of the tree. You can use another part for the crown and not necessarily paper.
Crafts. DIY Christmas trees made from thread.
You will need:
Thick yarn
Yarn with pile
Cone (cardboard or foam)
Pins
Decorations, to taste.
1. Make a paper cone or buy a foam cone from specialty stores.
2. Take both strands and pin their ends at the base of the cone.
3. Start wrapping the threads around the base of the cone, securing with pins approximately every 5 cm.
4. Now start moving towards the top of the cone, carefully wrapping both threads around the future tree. At this stage there is no need to attach the thread to the cone.
5. When you have reached the crown, pin the threads again by wrapping the threads around the crown several times.
6. Both yarns now need to be pulled down, also wrapping the cone in a second layer.
7. At the base of the cone, cut the threads and secure them.
You can leave the tree like this or you can also decorate it.
In this example, artificial berries were used for decoration, but you can use colorful beads, snaps, buttons, etc.
Try also making a decoration for the top of your Christmas tree. The top of the head can be decorated the way you like.
You can leave the tree like this, or you can also decorate it.
You can make just a paper hat or a star, or you can make something more complicated. If you chose the last option, then below are instructions for you.
You will need:
Flower wire
Nippers (for wire)
Sequins
PVA glue
Fine wire (calibrated wire)
1. Bend the wire into a star shape (see pictures) and cut off the excess.
2. Cover the star with glue and sprinkle glitter on it.
3. Attach a thin wire to the star, as shown in the picture:
4. Attach a star to your Christmas tree.
Creative DIY Christmas tree
If you want something original, or you just don't have enough space for... big Christmas tree At home, you can try to make such a simple design.
It is worth noting that such a Christmas tree is suitable for any room. It can be done both at home with children and at work.
This tree can rise 1.5-2 meters and takes up almost no space in the house. In addition, it is a good background for New Year's photography.
You will need:
Foam base or matte cardboard
Scissors
Corrugated paper
Masking tape
Adhesive tape
PVA glue
Stationery knife
Marker, optional
1. Lay out foam or cardboard on a flat surface to create a large rectangle (see picture).
2. Use duct tape to connect all the parts.
*This example used black duct tape for better visibility, but white tape is better.
3. Mark the size of your future Christmas tree using masking tape.
4. Using a utility knife, carefully cut out the shape of the future tree.
5. Prepare corrugated paper, fold it in half and cut the fringe. You should have many sheets of fringed paper to cover the entire tree.
6. Begin carefully gluing the corrugated paper to the foam, starting at the base of the tree. The fringe should hang slightly below the base to cover the foam (or cardboard), and also slightly cover the top of the tree trunk, which we will make later.
7. Work your way up to the top, covering the entire tree with a bright green coat of crepe paper.
8. Add a hook to the back of the tree so the tree can be hung. Instead of a hook, you can use double tape to cover the perimeter of the tree.
9. To make the trunk you need to cut out a small rectangle from foam or cardboard.
9.1 Cover the rectangle with brown paper, just like the Christmas tree, i.e. cutting fringe onto paper strips and gluing them.
What New Year can be imagined without the main symbol - the Christmas tree. Green beauties are sold on every corner on the eve of the holiday. However, for such a holiday it is not necessary to buy a live spruce. Try making it yourself. Therefore, in this article we will talk about what you can use to make a Christmas tree for New Year's holiday. It is worth saying that you can create the main symbol of the New Year from completely different materials. And today we will tell you more about this.
Mini Christmas trees made from pine cones.
If your children love making crafts just like you, then they can also take part in creating such crafts. The next craft - a New Year tree consists of cones and plasticine. All your child needs is to learn how to roll small balls from plasticine. At the same time, you can use plasticine of the brightest shades for this purpose. You can use regular spools of thread as a base for the Christmas tree. But you must wrap them in foil. The cones are attached to the coil using super glue.
If you liked the next Christmas tree, then take it acrylic paints and paint the bump with it. Remember that it is wisest to use green paint here. In this case, the tips of the tree are painted in white paint. Make it from plasticine brown base for the Christmas tree. Use a star for decoration.
The next craft is a little more difficult to make. Here it is worth using beads. Therefore, if your child is small, then monitor this process yourself. Glue the beads to the pine cone using a glue gun.
All of the above crafts made from pine cones can not only decorate your home. It will be a pleasure to present such Christmas trees as a gift to your loved one.
The next craft looks more voluminous. And to create it you will need several cones. You should use a thick cardboard cone as a base here. After which, the cone is covered with cones on all sides. In this work it is customary to use a cool gun. Once the glue has dried, cover the tree with large beads.
Simple tinsel trees.
If you read this article, you can learn how to do artificial Christmas tree at home. Above we offered you ideas for Christmas trees that were made from pine cones. Now we suggest using tinsel for this job. Naturally, for such a craft you must purchase the tinsel itself. For Christmas trees, make cones from cardboard. Then, glue tinsel to them. In this case, the tinsel should be glued to the cone in a spiral. While working, arm yourself with a glue gun.
Christmas tree made of candies.
The next tree may not only be beautiful decoration, but also a very nice gift. To make this craft, make a cone. Secure the candies on it with tape, and then wrap the Christmas tree with tinsel.
Simple and volumetric Christmas tree from paper.
The next craft is also very easy to make. It can be an excellent decoration for a child's room. New Year holidays. To make it, prepare:
- thick green cardboard,
- markers, glitter, paints,
- scissors and glue,
- scotch.
Work progress:
- We bend a sheet of cardboard in half and use scissors to cut it along the fold.
- We put the two parts that you got together and bend them in half again.
- Opposite the fold, using a marker, draw half of the Christmas tree.
- Now cut along the drawn line. As a result, you will get 2 Christmas trees that will not differ in any way from each other.
- Using gentle movements, bend each tree in half. Mark the center.
- Next, make a cut on one of the trees. The cut should be long from the very apex to the midline. For another tree, the cut should be from bottom to middle.
- Now we connect the trees by inserting them into the resulting cuts.
- To make the tree more stable, use tape.
- That's all, now start decorating your Christmas tree. Use your imagination and available materials here.
And here is another version of the Christmas tree, which you can make in the same way from an old cardboard box.
Elegant Christmas tree made of paper.
If you want to know how to make a beautiful Christmas tree, then the next idea was created especially for you. For such a Christmas tree, prepare:
- colored paper,
- scotch,
- glue and scissors.
The most difficult thing is to cut strips of colored paper, which must have the same length and width. In this case, each strip must be glued together with tape to form a loop. After which all the loops are glued to a strip of tape.
You should wrap a thick cardboard cone with similar garlands.
How to make a glowing Christmas tree.
If you decide to find out how to do christmas tree with your own hands, then you are on the right track. Above we described some simple crafts. Now it’s time to engage in serious creativity in order to do something original.
For creative Christmas tree prepare:
- Flower floristic sphere. For this case, we recommend buying more than one shade of green.
- Scissors, PVA glue.
- Thick cardboard for the cone.
- Cellophane, pins, garland, floral wire.
- Various decorations.
Work progress:
- First, we make a cone from cardboard.
- Wrap the cone in cellophane.
- We dilute glue with water in a container.
- We cut the floral mesh into pieces and place each piece in a container with glue and water.
- Now glue the pieces onto the cone. In this case, the joints are glued again for reliability.
- Use pins to prevent your craft from coming apart at the seams.
- As a result, you have the first layer of the tree. Make the second layer in the same way. Remember that after gluing the second layer, the structure must dry well.
- If the glue is dry, remove your tree from the cone.
- A garland is placed inside the tree.
- Now simply decorate the Christmas tree as you wish.
Christmas tree made of threads.
If you want to have something unusual for the New Year in your home, then in addition to standard decorations, decorate your home various crafts New Year themed.
Creating your next Christmas tree is also quite easy to handle. Take a sheet of Whatman paper and make a cone out of it. Coat the cone with glue and begin wrapping it with green thread.
When the glue is dry, separate the cone from the paper.
Decorate the finished Christmas tree with various accessories. You also glue the decorations to the tree using glue.
In conclusion
Celebrate your New Year brightly! Make many different Christmas trees that can make the atmosphere in your home truly magical.
Is an artificial tree sacrilege? Not at all. On the contrary, from the point of view of preserving the environment, buying an artificial Christmas tree for the New Year is a noble act. And by the way, you don’t have to buy a Christmas tree; you can make an unusual Christmas tree with your own hands.
How to make an unusual Christmas tree with your own hands
In almost all options for how to make an unusual Christmas tree, a cardboard base is used, as in previous master classes; all the unusualness of today's Christmas trees lies in the decorative materials.
To begin with, a selection of four unusual Christmas trees.
See below for how to make these beautiful Christmas trees.
The first tree is made from spoons.
To make this Christmas tree you will need: a pack of plastic spoons, glue and paint. The process of work is quite simple: we cut off the handles from the spoons, lay them on newspaper or unnecessary paper and cover the spray with paint (the cardboard base, by the way, can also be sprayed with paint). As soon as the paint has dried, we begin to glue the spoons, as shown in photos 6,7,8.
Next Christmas tree from Christmas decorations.
In order to make a Christmas tree from toys you will need: the actual packaging of Christmas tree decorations, glue, base and Christmas tree tinsel. We remove the rivets from the toys and glue them Christmas balls to the base, then glue tinsel into the space between the balls to hide the gaps. We admire the result!
And the remaining two Christmas trees: one is made of tinsel and sweets, and the other is made only of tinsel.
Or you can make a Christmas tree from tree leaves. Paint them with some spray paint and glue everything to the same base. It turns out to be a rather unusual, beautiful tree.
To the category of others original ways To make a Christmas tree with your own hands, you can include foam balls, feathers and glitter.
With Christmas trees made of feathers or foam balls, everything is clear - just glue them to the base. But about how to make a “shiny” Christmas tree, a few words should be said: before applying glitter, apply a mixture of shaving gel and glue (1: 1) to the base, let it dry a little and sprinkle with glitter. Agree, such trees look very original.
Another option that deserves attention is a Christmas tree made of cones or twigs. You can make a Christmas tree from whole cones.
Or you can, so to speak, “disassemble” the cone and glue its scales, as shown in the photo.
The unusual tree made of pine cones is ready.
An equally beautiful and original Christmas tree can be made from sunflower or pumpkin seeds.
It’s probably no secret that nowadays you can buy artificial fruits, and from them, as you can see in the photo below, you can make an unusual Christmas tree. Pre-paint the base suitable color, give the paint time to dry. Pour fruit over the dried base, decorate the bottom with beautiful branches, a bow on top and you can surprise your loved ones with an original Christmas tree.
By the way, in order to make a New Year’s topiary in the shape of a Christmas tree with your own hands, a cardboard cone will also work. In general, let's watch a mini master class on creating a New Year's topiary. A cone made of thick paper or cardboard needs to be glued to a stick (by the way, if you ate rolls the day before, you can use a stick from them) wrapped with twine or a beautiful thread. Glue the resulting structure to a glass, fill it with rice, and decorate it with tinsel on top. Well, now we’ll make the Christmas tree itself: cover the cone with lace, paint it and you can glue on various decorations (even the most ordinary buttons will do, the main thing is to paint them first).
You can leave the finished topiary Christmas tree in your decor, or you can give it to one of your friends for good luck.
A cardboard cone can be useful not only as a direct base for a Christmas tree. You can paste it over cling film and wrap it with threads pre-impregnated with glue. Glue different decorations and let them dry. When the glue dries, the Christmas tree made of threads can be easily removed from the cardboard cone, and all thanks to the film.
Or simply wrap the cone with wire, the wire with a garland and put on the toys. It turns out to be a very nice Christmas tree.
In addition to the garland, you can use some kind of fabric or lace. You will also get a very beautiful Christmas tree.
Or you can stick buttons into the foam base. Glue rhinestones or beads.
Or wrap the base tightly with thread and decorate it beautifully with buttons.
Buttons can be used not only to decorate the finished Christmas tree, but also to make a Christmas tree out of them, as shown in the photo.
And finally, speaking about unusual Christmas trees, one cannot help but recall wooden Christmas trees. Currently, various designer models have been developed that are sold in online and regular stores.
Are you and I worse than designers? - You can make a wooden Christmas tree with your own hands. To do this, you will need a sheet of fiberboard and tools to cut out the necessary parts from the sheet of fiberboard, and preferably a husband who will do everything.
Or this option, the principle is the same. This beautiful Christmas tree, like the previous one, is assembled from two parts.
If your husband is comfortable with this kind of work, you can persuade him to take on a more labor-intensive project: creating this unusual Christmas tree. I hope everything is very clear in the photo instructions.
The finished Christmas tree is attached to the wall, and you can decorate it as you please. You can even paint it some color, I think that will only make it better.
By the way, if you want such a tree to last for a long time, treat it with protective agents.
In addition, you can use wooden dies, planks, branches, etc. Cut them into different sizes and glue them together or nail them to the base. The result is original tabletop Christmas trees.
Or you can “string” the dies onto a thin base, you will get a beautiful three-dimensional Christmas tree. By the way, its “branches” can be rotated around their axis.
Or here’s a simple option to make an original Christmas tree with your own hands: just dress up the tray accordingly.
Or use an old wooden door or window shutters.
And here is another Christmas tree, which can be created using sticks left over after eating the rolls.
In addition, you can make an enlarged copy of such a Christmas tree.
Too troublesome, but did you like the tree? - Dress up the stepladder, quickly and easily.
And for those who have time for a carriage and a trolley, I would like to present the following “masterpieces”.
You can get confused and make a weightless Christmas tree. Surely you have a round lattice, and fishing line with hooks is not a scarce commodity these days. The main thing is that the Christmas tree turns out to be extraordinary.
An equally magical Christmas tree can be made from a metal mesh; just make a cone out of it, decorate it and enjoy the New Year’s “magic”.
Or you can make an unusual Christmas tree from wire and a large mirror. You need to make semicircles of different sizes, attach them to a triangular base, and paint them with paint. Once the paint dries, decorate the floor of the Christmas tree with a garland and attach it to the mirror.
Turn on the garland, turn off the lights and admire the resulting Christmas tree.
In addition to the mirror, you can use an unnecessary painting and create an unusual Christmas tree panel.
In general, you can make a Christmas tree out of anything: books, balls, corks, light bulbs, etc. Go for it! And for inspiration, below are a few more photos of unusual Christmas trees.
By the way, you can make an unusual one out of an ordinary Christmas tree, for example, turn it into a snowman!
Here they are unusual Christmas trees You can make it yourself for the New Year. Happy New Year to you!