How to store packages. How to fold a bag into a triangle: a simple and effective technique from an expert How to fold disposable bags for easy taking
Plastic bags may come in handy at any time. How to fold bags correctly so that they do not take up much space? There are several simple and interesting ways.
How to fold packages compactly?
Putting packages in a box
You will need a small cardboard box with a hole in the top that will fit in your cabinet.
· We take the package by its lower part. With the other hand we grab it around the diameter and pull it towards the hole to expel the air.
· Place the bag on the bottom of the box, turn the side with the handles up so that they stick out from the hole.
· Take the next bag and expel the air, as in the first case. We pull it with the bottom side into the loop of the handles of the first.
· Fold it in half (it wraps around the handles of the previous bag) and push it into the box so that the handles of the second bag stick out.
· We repeat the procedure based on the number of bags.
As a result, your packages will fit compactly in the box. In addition, it will be convenient for you to take them out from there. As you pull out the first bag, you prepare the next one.
How to fold packages? Triangle, cylinder, envelope
You can turn the routine of folding bags into exciting fun. To do this, you need to show your imagination.
Triangle
Lay the bag flat, straightening all the folds and expelling the air. Fold it in half lengthwise. Then double it again. You will get a long ribbon, the width of which will depend on the width of the package. You can make the ribbon quite narrow if you repeat folding it in half several times. Now bend the bag at the base away from you so that you get a small triangle. Repeat folding away from you and towards you along the entire length of the tape. As a result, the package will turn into a triangle.
Fold the bag into a narrow ribbon, as with the previous method. Then, from the base of the bag, loosely wrap the tape around your finger. Insert the middle and ring fingers of your other hand into the handles of the bag. Make one turn around the axis of the package just below the handles. Then place the loop on the twisted bag. Remove the resulting cylinder from your finger.
Many of us prefer to store bags instead of throwing them away. They can be used in everyday life for subsequent purchases, wrapping things or as garbage bags. However, the traditional method of storing bags in a bag looks messy and makes it difficult to find the item you need. In addition, the products remain wrinkled and untidy.
In this article we will look at how to fold bags compactly. We will learn how to properly fold cellophane packaging, paper and plastic bags, products with and without handles. Let's find out where you can store disposable T-shirts and other similar products.
How to fold bags correctly into triangles and tubes
For neat and convenient storage packages at home, the products are rolled into a tight tube, roll, bags, strips, or folded into a triangle and put away in a certain place. Before putting bags in a box, drawer or other place, be sure to check the product for integrity, remove debris and crumbs. If necessary, rinse the container in water and dry.
Fatty packages, products after meat and fish, containers with unpleasant smell throw it away! Store only sorted, clean, dry items. Otherwise, harmful bacteria and microbes, mold and mildew may appear inside! Read what to do if there is mold and mildew in your apartment.
Simply fold rigid and large items made of plastic, polyethylene or other material in half, place them tightly together and put them in a drawer or box. Roll fabric bags and bags into a tube, tie them with handles and also put them in a box, at the bottom of a cabinet or in a drawer.
How to fold into a triangle or tube
Laying the bag in a triangle, a bag and on a roll are practical and convenient ways folding polyethylene products. Such methods will reduce the volume of the item and do not require much storage space. At the same time, objects are easy to get. We offer the following technique that will tell you how to compactly fold bags into a triangle:
- To neatly fold bags, place the product on a hard surface and smooth the material with your hands, remove wrinkles and release air;
- Fold in half lengthwise twice;
- Carefully fold the corner of the strip at the bottom where there are no handles;
- Fold the triangle, turning left and right, until you reach the area with handles;
- Fold the handles in half and wrap them inside the resulting triangle.
Small cellophane T-shirts can be rolled into a tube. Lay out and smooth the product, remove the air from inside and fold in half twice to get a narrow long strip. Wrap the resulting strip around two fingers, and wrap the handles around the resulting tube or roll. Now that we've looked at how to conveniently fold bags and T-shirts, let's find out in more detail where to store them.
Where to store packages
Today, there are several places where you can put packages. The most traditional is an unnecessary cardboard box or desk drawer. In addition, for storage you can use a special drive or organizer, which can be purchased at the hardware department or store. It represents a device in the form of a pipe with a hole inside or a box with holes in the walls through which it is convenient to get objects.
The bag is wrapped in a tube and put into the hole, while the handles are left outside. The next object is threaded into these handles and then put into the hole, also pulling the handles out and leaving it like that. Each subsequent product is inserted by analogy. This method makes it very convenient to store and easily retrieve objects with handles.
By the way, you can make such a device yourself by taking a cylindrical cardboard or metal box. It could be a box of chips, tea, household product, a container for napkins, cookies or candy. Be sure to rinse and clean the container before use. If the box is too large in diameter, make a hole in the lid.
Can also be used for storage plastic bottle from carbonated water, drinks, juice or beer. A two-liter container would be a suitable option. Let's find out how to make such a “bag holder” and how to compactly fold the bags into a bottle.
How to store bags in a bottle
Take a plastic bottle with a volume of at least a liter, rinse thoroughly and dry. Cut off the bottom and top at a distance of 10-12 centimeters below the neck. Sand sharp edges with fine sandpaper. Thus, you will get a device in which you can put packages through the bottom and take them out through the widened neck.
You can also use another method by cutting and processing only the neck of the container. In this case, bags intended for storage are flattened and rolled into a narrow strip. To do this, take a T-shirt with handles and smooth out the material. The handles are turned to the side, and the main part is rolled into a roll.
When you reach the middle, take the next product and place it on top, without unscrewing the handles. Keep rolling. Thus, the tapes are rolled into a packet “roll” and the resulting roll is placed in the prepared bottle.
For the first T-shirt, fold the arms and pull them out so that they are visible from the neck. To remove the bag, simply pull the handles up. As a result, the object easily comes out of the bottle and pulls the next one with it. Moreover, such a bottle does not take up much space.
How to fold packages? We will answer this question for all housewives who want to create maximum comfort in their kitchen. As a rule, it consists not only of cleanliness, but also of order. Each item, including the described accessory, should be in its place and not take up much space.
If you have accumulated too many plastic or paper bags, do not rush to dispose of them. Firstly, it's very necessary thing in the house, which can be used everywhere. Secondly, there are a lot of ideas for compact storage of bags, which we will be happy to share in this article.
Lifehacks for folding bags
We suggest using the life hacks below, with which you can very quickly and neatly fold the packages that have accumulated in the kitchen.
In addition, you can make very convenient “bag holders” with your own hands, from which you can pull out the bags one by one. In addition, with such careful storage, the packaging material will never become wrinkled or accidentally tear. We offer two options for homemade “bag holders”.
One of the most convenient package storage is a box or jar of cloth napkins. Such a container already has a hole through which you can take out the packages, but first you need to place them in it. To do this, the packaging material should be leveled and placed on the bottom of the box, leaving only the tip of the bag peeking out. If “T-shirts” are used, then the packet handles need to be pulled through the hole. The next bag should be threaded through the handles of the previous one. Thus, it is necessary to fill the entire box. The bags are very easy to get. After removing one package from the box opening, another immediately peeks out. If there is no tissue box, then you can use any other cardboard packaging instead, for example, a tea container. However, in this case, you will need to additionally cut a hole.
A plastic bottle is considered an equally compact storage for bags. Its operating principle is the same as in the previous case. After removing one package, the next one is automatically taken out. To from regular bottle To make a convenient place to store packaging material, prepare a two-liter plastic bottle. Wash it, wipe it dry, and then carefully cut off the top part, that is, the neck. At the cut site, be sure to use sandpaper (zero) to sand the cut part. Otherwise, you may be seriously injured during the storage preparation process. When the container is ready, take the required number of bags and set half of them aside. Roll the bags from one stack individually into a tube, moving the handles to the side. After this, move the second stack of bags and take one bag from it, which you will use to wrap all the previously rolled bags. In this case, the handles are also twisted. This way, use all the bags to make one roll. Place it in a previously prepared bottle, which is then covered with a cut off neck and lid. Now all that remains is to pull the handles of the first bag through the bottle hole, pulling which, as you remember, will immediately pull out the other bag.
In both cases, the organizers are very convenient to use. You can store both grocery bags and garbage bags in them. When packaged, they can be placed in any corner of the kitchen, for example, on a kitchen shelf or on a stand under the sink.
A good housewife has order in her kitchen. Everything is in its place, laid out on shelves. Home craftsmen know how to store even plastic bags from the store in such a way that they take up minimal space, do not wrinkle, and are at hand.
How is this possible? It is enough to learn the simple science of how to fold packages compactly into a box, an empty plastic bottle, or at least learn how to roll them into tiny tight triangles or rolls. There are many options. Let's consider the simplest and most rational ones.
How to fold a bag into a triangle
This is the best way to fold T-shirts. Size doesn't matter.
Progress of the procedure:
Crumbs, trash cans, and store receipts are shaken out of the bag.
Lay out on the table.
Straighten the crumpled tops of the handles.
Pry the corners of the sides at the bottom with your fingers, handle the handles and align.
Repeat the manipulation on the other side.
Smooth it over the surface with your hands, expelling the air.
Fold the product in half lengthwise twice. The result is a strip equal in width to the width of the “T-shirt” handles.
The lower part is wrapped in a triangle. Continue folding, directing movements to the right and left, until the middle length of the handles.
The remaining loose ends are tucked into the resulting pocket.
The work takes a maximum of a minute, and as a result we have a small, dense, non-unfolding triangle. Store polyethylene bags folded in this way in a suitable container - a box, box, linen bag, etc.
Watch how to fold bags compactly in the video:
It’s even easier to make a tube from a bag with handles. The product is folded with a ribbon, then taken in the hand and wound on two fingers, starting from the bottom. Not reaching 8-10cm from the top, insert the fingers of the other hand into the handles and, with a turning motion, make a loop around the rolled up bag. The result is a miniature flat rectangle.
Plastic bottle storage
In supermarkets, free small bags are displayed in rolls. It is convenient for customers to unwind and tear off as many bags as needed. So why not bring this storage method to your kitchen? Moreover, you don’t have to do anything complicated or buy special organizers.
The storage device will be a plastic bottle from under mineral water, sweet soda, beer. Container volume - 2 l. You can use a 0.5-1 liter bottle, but usually there are so many small bags accumulated in the house that it is more advisable to put them in a 2-liter bottle.
Algorithm of actions:
The drive is ready. Now, to get the little bag, just pull the handles up. The package easily comes out of the bottle and pulls the next one with it. This dispenser organizer is easy to use and takes up very little space.
You can place it on a shelf, the work surface of the kitchen module, and attach it with double-sided tape to the inside of the door of the cabinet under the sink.
“Bag box” from a cardboard box
Use any boxes - napkins, chips...An equally rational way to store bags with handles is to pack them in an empty cardboard box.
It is easier to use a container for napkins for this purpose, the lid of which has a special hole.
If you don’t have one in the house, you can take any box and cut a slit 15 cm long and 2 cm wide with a knife or scissors.
Storing packages into such a drive is very simple:
The box is covered with a lid with a hole cut in the middle.
The package is leveled by hand by weight.
Place inside the container, leaving the handles outside.
Take the next bag and level it.
The lower part is threaded through the handles of the previous one and pushed inside the box, leaving the upper part outside.
The remaining bags are placed in the same order, filling the box.
The handles of the last stacked bag are peeking out of the storage bin. Now, to get the package, just pull them. When one bag is removed, it will automatically pull the next one with it.
You will be surprised how much space will be freed up when all the bags are packaged by size and placed compactly in drives. Simple and extremely convenient!
See more storage ideas.
It's hard to live without packages in life. They are bought specifically for various household needs, but most sachets end up in the home along with food and clothing and are reused. To make packages easy to find in right moment, you need to learn how to fold them and store them.
Triangle fold
Many people have had situations when you are looking for a bag that is not wrinkled or torn and cannot find it. To prevent this from happening in the future, all bags in the house must be carefully folded. This is not difficult to do.
- Take the bag in your hands and level it on the table or floor.
- Fold in half lengthwise. You need to do this 2 times to get a narrow strip.
- Fold the bottom corner of the strip and continue folding it into a triangle, turning it to the left and then to the right.
- As a result, you have a plump corner that takes up very little space.
If the bag has handles, then they can be tucked inside the corner. Such manipulations must be carried out with all used bags. The resulting triangles can be stored in a special bag, in a desk drawer or cardboard box.
Rolling into a tube
It’s even easier to roll a thin T-shirt bag into a tube. To do this, you need to level it, make it flat and carefully fold it into a narrow strip, exactly as in the triangle folding method. Next, this strip should be wound around two fingers, and the handles should be wrapped around the resulting tube.
Once you roll all the thin bags, they will take up significantly less space. They can be stored in a tea jar or any other container with a lid. At the right time, packaging material will always be at hand.
If the packages are large and rigid, then you can fold them in half and put them in one box in a row. At the same time, it is necessary to carry out an inspection and immediately throw away any leaky or heavily soiled specimens. The likelihood that you will reuse them tends to zero.
Never store packages containing meat or fish. They will spread bad smell and can become a source of bacterial growth. Check that there are no food residues, crumbs, or moisture inside. This can cause mold and insects to grow inside.
Drives
There are special drives for packages that allow them to be stored compactly and easily removed one after another. This type of storage can be purchased at the store or made from an empty box of paper hand towels. The box has a narrow opening that allows you to remove napkins.
- you need to fold the bag into a narrow strip and put it in the box so that only the handles peek out;
- the next package is folded flat, pulled through the protruding handles of the previous one and stuffed into the box, again leaving only the handles outside;
- the process is repeated until the box is full or the bags run out.
The drives can be sewn from bright scraps or knitted in the form of a long tube. One end of the pipe should be free, and an elastic band should be sewn into the other end, which prevents the contents from falling out. Packages are inserted into them on one side and taken out from the other.
Bottle storage
Packages lying around the house can be compactly folded into a plastic bottle. If you look closely, it looks like an excellent storage device, you just need to cut off the bottom. The more sachets there are in the house, the larger the bottle required. Typically a 2 liter container is used.
For convenience, the neck is also cut off to widen the hole, and the edges are rubbed with sandpaper. From the wide side, the bags are inserted into the bottle, and from the narrow side they are taken out. It turns out to be a kind of dispenser that is convenient to use and store on the kitchen cabinet shelf
It will be even more convenient if you attach such a bottle to the inside of the sink door. This can be done using double-sided tape. There, under the sink, there is usually a trash can. You can take out the old bag and immediately use it for its intended purpose, that is, for the trash can.