How to iron a linen jacket. How to properly iron a jacket, main points, subtleties and nuances

How to iron a jacket is the main question for employees of enterprises where a dress code has been introduced. This wardrobe item should always have a neat and clean appearance, which speaks volumes about a person’s image. The jacket is used both at special events and in everyday work. Sometimes it takes a lot of effort to smooth it out. It’s good if you can take it to the dry cleaner, but if there is no such establishment nearby, and you can’t go to work or an event without the product, then you can handle the procedure at home. The main thing is to comply with all the necessary requirements.

Before ironing your jacket, you need to properly prepare it. First you need to carefully inspect the product and make sure it is clean. If there is dirt and stains on the item, then after ironing they will become even more attached to the fibers. If dust gets on the product in the closet, it must be cleaned off with a damp brush.

For ironing you will need an iron (preferably with a steam function) and a damp cloth. The device must be heated to the required temperature (it must be indicated on the tag of the item of clothing).

All folds and creases must first be removed.

You need to remove all unnecessary items from your pockets.

1. First, the product is turned inside out and laid out on a horizontal surface. The lining needs to be spread out as much as possible. After this, the pockets are smoothed until the intervening tissue is completely dry.
2. Next, the sleeves are processed. For convenience, you can use a special stand on which this part of the product is placed. Do not allow wrinkles to appear on the elbow. Instead of a stand, you can use a tightly rolled towel.
3. Now let's move on to the shoulders. Here you will need a steaming function.
4. Next, the edges, shelves and back are ironed. These parts of the jacket are processed on both sides. It is imperative to use a damp intermediate cloth.
5. Lastly, the collar and lapels are ironed. They are processed without steaming through a damp cloth. This should be done only from the wrong side of the product. If these parts are too wrinkled, then in this case you need to iron the jacket after pre-wetting it with a little pulling and pressing. The corners need to be worked well with the tip of the iron.

A damp cloth is necessary for ironing so that the fabric on the jacket does not become shiny and there are no streaks on it. The gauze should be moistened in clean, preferably distilled water.

Before ironing a jacket at home, you need to pay attention to the material it is made of.

1. Cotton and linen products. They can be ironed at high temperatures. To get the maximum effect, you need not only to use an iron, you should also wet the fabric of the jacket itself.
2. Synthetic jackets. Such a men's jacket should be ironed strictly with a warm iron, and the steaming function will be superfluous here. The fact is that artificial fabrics do not absorb moisture well.
3. Wool, fabrics with pile, corduroy. The desired effect can only be achieved by ironing such products through a damp cloth. Moreover, the iron should not slide on its surface. Light pressing movements are required here. The pile will return to its shape if the reverse side of the jacket is steamed.
4. Silk. If it is natural, then ironing a suit of this type is prohibited. Artificial silk requires the lowest possible temperature, and there is no need to spray the fabric with water to avoid stains. In this case, it is better to use the steam function, and the iron should be kept at some distance.

Ironed items should be allowed to rest and cool for several hours. Otherwise, they will not wrinkle, but will lose their shape.

Since ironing a jacket correctly is not an easy task, you can use some small tricks:

• the product can be dry-cleaned, where they will not only iron it, but also remove old stains;
• After completing the procedure, you should not immediately hang the jacket in the closet, as it will simply lose its shape; it is better to leave it lying on the ironing board for a quarter of an hour to cool;
• if the fabric does not tolerate the high temperature of the iron sole, it is better to use the steaming function (a basin or bath with heated water is suitable for this);
• all parts of clothing should be well lit so as not to miss a single fold;
• If the jacket has metal buttons, you should iron it very carefully, because the material becomes dull and the soleplate of the iron may deteriorate.

Naturally, how the ironing procedure will be carried out is decided by the hostess herself. However, the recommendations presented will make this process easier. In addition, if you know how to iron a jacket at home correctly, the procedure will be reduced significantly in time. Moreover, the effect will be the same as after dry cleaning, or even better.

Every business person probably has such a piece of clothing as a jacket in their wardrobe. It is this detail of the costume that emphasizes his status and position in society. A well-groomed man in a formal jacket always attracts attention and commands trust, achieving success both in his career and in his personal life. But it is worth remembering that good fit and appearance of the product depend not only on the quality and type of material used. Correct and timely care is of great importance, in the process of which ironing is one of the main steps.

There are several ways to tidy up your jacket and smooth out every detail of your clothing on your own:

• using a special steamer;
• using an iron.

Steaming with a steam generator or an iron with this function is the most effective and fastest method and is suitable for all types of fabrics. The powerful steam jet of the steam generator does not damage the fabric surface of the product, while smoothing out bends in hard-to-reach places.

REFERENCE!

It is recommended to iron a jacket with embroidery or decoration only using steam!

Electric steamers are not cheap, so not all people have the opportunity to use them. In this case, there is a cheaper, but no less effective way - steaming in the bathroom. To do this, fill the bathtub with boiling water and place a jacket on hangers over it for 30 minutes. The doors to the room must be closed tightly so that the steam completely envelops the product.

IMPORTANT!

After steam ironing in the bathroom, things get wet, so they need to be dried immediately after the procedure.

Is it possible to iron a jacket with an iron?

Many fabrics from which clothing is made are not intended for ironing, since their structure cannot withstand high temperatures. Therefore, before starting the work process, you must carefully study the tag, which contains exact recommendations for setting the temperature mode in accordance with the material of the item. If the iron is crossed out, you must use a different smoothing method.

How to iron a jacket at home

You can iron any jacket well and quickly when the work process is smooth and comfortable. This will help iron even a child’s jacket that is heavily wrinkled. Therefore, before you start ironing, you need to properly prepare:

1. install an ironing board with a narrow attachment for sleeves and other small parts;
2. arm yourself with an iron (preferably with a steam function);
3. have a small piece of cotton fabric or gauze on hand;
4. Prepare a container with clean water.

One of the basic rules for ironing a jacket is the absence of stains or dirt on its surface. Before you start work, you need to carefully inspect the clothes, since not only the appearance of the ironed product, but also its further suitability depends on this.

ATTENTION!

When exposed to hot temperatures, shiny areas or old stains penetrate deep into the fibers of the fabric, settling firmly in them. Subsequently, it is almost impossible to remove them. Therefore, before ironing, it is recommended to dry clean even clean items that have been stored in the closet for a long time.

When the clothes are completely prepared for work, you need to lay them out on a board and straighten out all the parts to get rid of old folds, which can later ruin the appearance.

How to properly iron a jacket: sequence of actions

It is very difficult to iron a jacket correctly so that it fits perfectly and has an impeccable appearance on your own. For this purpose, a whole system has been developed, the implementation of which determines the final result and success.

What is ironed first?

Pockets are ironed first.. Before starting the work process, turn the product inside out and clean it of its contents, including the smallest particles of remaining debris. Then we straighten the pocket pouch well on both sides to get rid of creases and folds (you can use moistened gauze to make it easier). Iron the pocket on both sides and turn it inside out.

IMPORTANT!

After using wet gauze, the fabric becomes wet and becomes a favorable place for mold to grow. To avoid this, iron the wet part of the pocket through a dry piece of cotton.

These parts of the jacket are also ironed from the reverse side, but require more attention and effort. The turned-out piece of clothing is placed on a narrow armrest attached to the ironing board. The sleeve begins to be steamed at maximum temperature, gradually scrolling along the axis and moving to the shoulder area.

REFERENCE!

The armband can be replaced with a towel tightly rolled into a roll.

How to smooth collars, lapels, fronts and edges

These areas can be ironed from both the front and back sides. But in the first case, it is necessary to use a moistened lining or gauze so that the iron does not leave marks on the surface of the product. It is not recommended to iron buttons or metal stripes, as they will lose color and leave marks on the clothing.

Lapels and collar are important details of a jacket, which, when wrinkled, spoil the appearance of the garment. These parts must be ironed from the front side, after placing gauze moistened with water on the fabric. Hard-to-reach corners should be passed with the tip of the iron using steam.

How to properly iron a jacket depending on the type of fabric

To put a jacket in order after washing or lying in the closet for a long time, having ironed every detail well, you must adhere not only to the order of actions, but also follow certain rules indicated on the label of each item. The temperature regime and the ironing process itself, in accordance with the material of the product, may vary.

• Wool or wool mixture.

The temperature of a heated iron for such fabrics should not exceed 165°. It is recommended to iron wool (half-wool) using moistened gauze folded in several layers. If the item is slightly not completely dry after washing, then there is no need to wet the gauze pad.

REFERENCE!

Clothes made of wool can stretch or shrink, so do not press the seams and edges of the product too much.

• Velveteen.

This type of material requires special attention and patience. It is much easier to iron the fabric surface when wet. It is better to do this with a warm iron and not from the outside. The board, which should have a soft surface (often using a blanket), is also of great importance. Iron the jacket from the wrong side, in the direction of the nap.

ATTENTION!

The easiest and most effective way to iron corduroy is to use steam. Just fill the iron with water and turn on the steam mode. After this procedure, the corduroy jacket becomes like new.

• Linen and cotton.

This jacket should be ironed damp or with damp gauze. If there is no lining, the product can be ironed at 230 °C on the reverse side through moistened gauze. If there is a lining, it is necessary that the temperature matches its material, otherwise it may be damaged and the jacket will lose its beautiful appearance.

• Natural silk.

Often, silk items are not ironed; this is done only when absolutely necessary. Then you need to select the “silk” or 150° mode on the iron and iron it from the inside out through an undyed, dampened napkin or loose fabric. You can also steam the product with warm steam.

• Polyester.

Synthetic items are ironed very rarely. This is done only with an iron, since steaming is not suitable. To select the correct mode, please read the notes on the product label.

How to iron a jacket at home: a few tricks

In order for clothes to always look like new, and for its owner to have a neat appearance, you need to know some subtleties in the ironing process:

1. It is not recommended to put the jacket in the closet or put it on immediately after ironing. It is necessary to leave the item on the board until it cools completely. Then the product will take its shape.
2. The light when ironing for right-handers should fall from the left side, for left-handers, respectively, from the right. With the correct stance, all present flaws are clearly visible.
3. A product with buttons requires some care, since the sole of the iron can be damaged by the surface of the accessories present.
4. For fabrics with a fleecy surface, only reverse ironing is used., moving the nose of the iron from the top to the bottom (in one direction), then the finished product will not have kinks on the outside.
5. When wetting the gauze, it is necessary to wring it out well so that shiny areas do not appear on the product.
6. Items with drawings and patterns are advised to be ironed only from the inside out. When smoothing pockets or other small items externally, use a compacted napkin.
7. You can get rid of shiny areas on fabric using woolen fabric. It must be placed on an area of ​​clothing and ironed.

These simple recommendations will help you iron your jacket correctly and keep it looking great for a long time. For better clarity, you can also watch several videos, however, the main recommendations are presented here.

How to iron a jacket without burning it

A jacket tag is a real helper for every housewife. It indicates temperature conditions that can be used for a certain type of material. Before starting work, you must read the instructions for use of the unit itself. There are established platform heating standards for each type of fabric.

Woolen items require a special approach. During the ironing process, you should not leave the iron on the clothes for a long time, as yellow spots may appear, and subsequently burn holes. Items that are not designed for ironing should be ironed using a steamer. By following all precautions during ironing, you can always bring a jacket made of any fabric into excellent shape without burning it.

How to properly iron a jacket if you don’t have a vertical steamer? There are little tricks that will make the ironing process with a regular iron quick and easy.

How to iron a jacket correctly

What you need to iron a jacket

Before starting the process, prepare the necessary components:

· small container with water;

· culinary rolling pin;

· towel;

· brush for clothes;

· a small hard pillow for ironing.

If the iron is equipped with a steamer, you will not need a container of water. In this case, when ironing the jacket through gauze, turn on the steam mode. A rolling pin and a towel will come in handy if your ironing board does not have a narrow board for sleeves.

The jacket must be clean. If you take it out of the closet, be sure to shake it out of dust and clean it additionally with a brush. Get started by first reading the care label. See at what temperature your jacket should be ironed. Work strictly following the instructions.

How to iron a jacket

The jacket must be ironed following a certain sequence:

1. Start ironing the jacket from the sleeves. If there is a small board, the sleeve is put on it. If not, wrap the rolling pin in a towel and tuck it into your sleeve. This will allow you to iron it without creases. Be sure to iron through gauze.
2. Fleecy fabric is always ironed from top to bottom. Any other one can be ironed as you wish, but away from you - along the length of the product - and in one direction.
3. After the sleeves we move on to the shoulders. Place a pillow for ironing on the wrong side of the shoulder. Gently steam the fabric through gauze. To prevent creases from forming, try to stretch your shoulder as much as possible along the plane of the pillow. If there is no pillow, you can do this operation by pulling the shoulder onto the narrow end of the board.
4. Then we move on to the lapels. Most jackets are made on an adhesive basis. How to iron a jacket in this case? Lapels and front panels of glued products cannot be steamed. Parts may become blistered. Fixing this error will be difficult. Iron them through dry gauze without turning on the steamer.
5. Iron the seams from the inside out without much effort. After turning the product over to the right side, try to avoid the seams or iron them without pressing. Otherwise, you risk having them printed on the front side.
6. Lastly, iron the back of the jacket and collar.

If you need to straighten your jacket after it has been folded, run hot water in the bath. Hang your jacket on hangers above the rising steam. After a while he will straighten out. This advice is valid for products made from natural materials.

The jacket is an integral part of the wardrobe of women and men who adhere to a conservative style of clothing. In order for this product to maintain its aesthetic appearance, it is necessary not only to keep it clean, but also to know how to iron a jacket correctly.

The easiest way is to turn to specialists who know exactly how to care for this or that type of clothing, but you can put things in order yourself, at home.

Preparation of the product and selection of temperature conditions

Before ironing a jacket from a women's or men's suit, you should make sure that this type of treatment is not contraindicated for the product. To do this, you will need to pay attention to the label of the item, which contains the necessary information.

In cases where a crossed-out iron is drawn on the tag, it is not recommended to subject the jacket to classical ironing. However, this icon does not prohibit other methods of heat treatment, such as removing folds and creases using a steamer.

Proper ironing of a product involves a preparatory stage. To do this you will need to do the following.

1. Empty the pockets of the product from the contents.
2. Inspect the surface for dirt and stains and, if present, wash the clothes.
3. In cases where the jacket is clean, it is worth going over the surface with a clothes brush to remove lint, animal hair and dust.
4. If the item has deep folds, you will need to hang it over a basin of hot water and leave for 10-15 minutes. This will help smooth out any creases that have formed.
5. Select the appropriate ironing temperature.

The last point causes some difficulties for inexperienced housewives. Information on the recommended heat setting for your iron can be obtained by carefully reading the label. There are dot icons here that indicate the degree of heating.

• One point. The recommended temperature for ironing the product is from 90 to 115 degrees.
• Two points. You can iron the product well by setting the temperature to 120–140 degrees.
• Three dots. It is possible to remove wrinkles from the fabric only by heating the iron from 160 to 200 degrees.

Since ironing units are different, in order to properly iron a jacket and not spoil it, you will also need to study the instructions for use. As a rule, it contains information about what platform heating to set when ironing a particular type of material.
Basic rules of work

Regardless of the quality of the product and the type of material from which the jacket is made, the following rules should be followed during the ironing process.

1. To put an element of a suit in order only on an ironing board, or, as a last resort, by spreading it on a hard surface.
2. Always use dampened gauze to prevent shiny marks from forming on the fabric.
3. Use the steaming function if it is provided for a particular unit.
4. To shape the product in the shoulder area, as well as to iron the sleeves, use a special roller or a tightly rolled towel.
5. Iron the front and back of the jacket not only from the front, but also from the back.
6. If the lapels and collar of a garment are heavily wrinkled, these parts of the garment will need to be sprinkled well with water, and the fabric will need to be stretched during the ironing process.
7. If there is a pattern on the product, iron these areas from the wrong side, and if heat treatment “from the face” is required, use a multi-layer lining made of thick paper or thick fabric.
8. If shiny areas appear, iron them through a piece of woolen material.
9. If the jacket is made of fleecy fabric, you can move the iron over the product only in the direction of the fibers.
10. When the product has fasteners in the form of metal or plastic buttons, you should avoid heating the fittings, since under the influence of high temperatures it can melt or tarnish.
11. Iron the parts of the product only in a certain order - this will help to avoid creasing of already ironed parts of the clothing.

To prevent the jacket from becoming wrinkled immediately after ironing, it should be left on hangers for a while. Only after the fabric has cooled and dried can it be put on or stored in a closet.

How to iron a jacket correctly: step-by-step instructions

To iron a piece of a suit correctly and avoid the formation of creases, you need to do the work in a certain order.

1. Ironing pockets. They will need to be turned out and ironed through a damp cloth, and then returned to their place and ironed once tucked in.
2. Steam treatment of sleeves and shoulder seams. This part of the work is considered the most difficult, since such items of clothing can only be put in order using a special iron or a rolled towel. They are inserted into the sleeves or placed under the “shoulders”, after which the desired areas are smoothed through damp gauze.
3. Ironing of hems, front and back. First, these parts are ironed from the wrong side, and then turned inside out and re-steamed using a dampened cloth.
4. Lapels and collar. These areas are ironed only from the front side, slightly stretching the material and straightening the corners of the parts with the “nose” of the iron.

When the jacket is heavily wrinkled, during the ironing process it is necessary not only to use moistened gauze, but also to moderately wet the fabric itself. This will help you get the product in order faster.

How to iron jackets made from different materials

Each material requires an individual approach, for this reason you need to take into account its characteristics and take into account recommendations for steaming a particular type of fabric.

• Leather. It is better not to iron such material at all, and if wrinkles have formed on the product, it should be hung on hangers of suitable size and wait 2-3 days until the creases go away on their own, or hold it over a container of hot water for 15-20 minutes. If this does not help, you can iron the problem areas only from the lining side with a low-heat iron.
• Flax. Most often, jackets made from this material are sewn without lining, so such a product needs to be ironed on both sides using steam. In addition, it should be taken into account that it is almost impossible to completely smooth out natural linen and slight “bruising” of the product is allowed.
• Cotton. Such fabrics are resistant to high temperatures, but in order to iron such a jacket well, you will need to wet not only the gauze, but also the product itself.
• Silk. In most cases, this type of fabric of natural origin cannot be ironed, but synthetic material can be heat treated with minimal heat from the iron.
• Wool. Such jackets are ironed with a low-heat iron, without pressing the platform to the material. Otherwise, shiny areas may form on the surface of the fabric.
• Velveteen. It is better to heat treat such material from the inside out, placing a soft cloth under the “face”. If there is a need to iron the product from the front side, this can be done by moving the iron only in the direction of the pile.
• Synthetics. Artificial materials rarely wrinkle, but if minor wrinkles appear, it is enough to iron them with a slightly heated iron, turning off the steam function.

If the housewife has serious doubts that she is able to put the jacket in order on her own, it is better not to risk an expensive item, but to entrust the cleaning and steaming to the dry cleaning staff.

What to do if you don’t have an iron at hand?

There are times when you urgently need to iron clothes, but there is no way to use an iron. Such situations often arise on business trips, when even a perfectly packed jacket in a suitcase still gets wrinkled.

Finding a way out of the situation is not difficult; to do this you will need to do the following.

1. Fill the bathtub with hot water and close the door tightly so that the room is filled with steam.
2. Hang the product on suitable hangers and straighten out the folds.
3. Place the jacket in the bathroom for 10-15 minutes.
4. After this time, hang the clothes to dry indoors or outdoors, without removing them from the hangers.
5. You can put on a costume piece only when it is completely dry, otherwise the fabric will wrinkle even more.

When ironing a jacket, the most difficult area is the sleeves. From the video you will learn how to cope with this task using a rolling pin.
Roll the towel into a rounded roller around the rolling pin, put it in the jacket sleeve and, covering the areas to be ironed with a damp cloth, lightly apply the iron to the cloth until the resulting wrinkles are steamed.

Some more practical tips on how to iron a jacket

Everyone is familiar with the saying “you are greeted by your clothes,” and in our time it primarily refers to a business suit. Therefore, it’s a good idea to remember how to iron a jacket.

Maybe someone will say that there is nothing complicated in this task, but the wrinkles that once appeared on the jacket may not be smoothed out, moreover, if you rush, there is a risk of making new ones. Therefore, if you are not sure that you can iron the jacket well yourself, then it is better to take it to the dry cleaner. Well, for those who decide to take matters into their own hands, we will give some useful recommendations.

What to do before turning on the iron

Before ironing the jacket, carefully smooth all its parts with your hands, don’t forget the collar and lining. Check the front for stains, streaks, heavy dirt, crumbs, hair or pet hair. Please note that if you iron a dirty jacket, it will be much more difficult to wash it later.

Install the ironing board. If you don't have one, use a towel folded in half; Place it on a flat surface that is not afraid of high temperatures.

Read the care instructions on the jacket's label. The most important thing is to know the composition of the fabric. If it's a linen jacket, the iron may be hot and you'll need steam. If it is wool or wool blend, a warm iron with steam is what you need. If the jacket is made of synthetic fabric (eg polyester/nylon), use a cooler setting without steam.

Apply steam if desired. If you're using steam (you'll get better results), find a small jug to fill the iron's reservoir with water.

Make sure that the soleplate of the iron is clean, otherwise dirt from it will get onto the fabric of the jacket. If it needs cleaning, scrub it with a brush and dry it with a damp cloth.

Turn on the iron and set the correct temperature. One dot is cool, 2 dots are warm and 3 dots are hot.

Wait until it warms up. If you iron too early, water will seep in and may stain the fabric.

Lay out the jacket on the ironing board so that there are no folds. Otherwise, creases or new folds cannot be avoided.

Prepare a small piece of fabric, preferably cotton, but not too thick. You can use gauze folded several times. Moisten it a little with cool water, but not from the tap. The most convenient way is to pour water into a small bowl, place it next to the ironing board and periodically dip the fabric into it. Or spray the liquid evenly over the entire surface of the material with a spray bottle.

Try ironing the lining fabric with a hot iron first, and if for some reason the iron still leaks or stains it, it won't be in a visible area. Adjust the temperature settings if necessary and continue ironing gently.

Do not move the iron, only lift it and press lightly. Using light pressure, iron the back panel lining in a smooth motion.

Unfold the jacket and iron the front panel lining, paying particular attention to the lapel area. Iron the area under the lapels so as not to flatten them. After ironing once, do not return to the same place again!

Finally, turn the jacket over and carefully turn the pockets inside out, placing them flat on the ironing board. From there we will begin ironing the jacket from the front side: first one pocket, then the second.

Iron sleeves and hangers

The sleeves of the jacket are pre-moistened with water. Once wet, place them face down on a small ironing board attachment. This toy-looking board can be found in hardware stores. It makes it very convenient to iron the sleeves of not only jackets, but also leather jackets or men's shirts.
The sleeves are put on the nozzle and gently ironed with steam, gradually turning in a circle, making sure that there are no folds or bends.

You can, of course, do without such a board by using the method shown in the video, but you just need to be very careful and carefully iron one sleeve after another.

Do not forget to constantly wet the fabric or gauze through which you are ironing; if this is not done, the material of the jacket will begin to shine.

Special attention is paid to the shoulders and lapels. To do this, the shoulder of the jacket is pulled over the tapering part of the board, and all other parts are ironed. To properly iron the hard part, the shoulder must be moistened.

You can also use a steam boost; just be careful not to let your hand get in his way.

Iron the shoulders of a jacket without lining from the wrong side. You can moisten them by spraying them with a spray bottle.

Lapels are ironed without steaming, simply through gauze

After this, carefully iron the hem, and from the front side, iron the back of the jacket and the front front panels.

Let's move on to the collar

Lastly, you need to iron the collar, straightening it.

You can’t talk about how to properly iron a jacket without forgetting about the collar. This part is always visible, so we pay special attention to the collar.

• carefully straighten the collar;
• cover the part that will be ironed with a damp cloth;
• smoothly run the iron exactly along the seam.

An important point: with one hand you need to iron the collar of the jacket, and with the other hand you need to create tension in the fabric. This is necessary so that the seam straightens and there are no gathers on it.

Now you know exactly how to iron a jacket without making folds, creases, or simply ruining it.

Some tips

For the most diligent housewives, we have a few more tips:

• If the fabric on your jacket is fleecy, then you need to start ironing it from the top so that the pile lies correctly and does not wrinkle. Smooth fabric can, in general, be ironed in any direction, but if you choose a certain direction, then you need to follow it over the surface of the entire jacket.

• An alternative to an iron is a steamer. You can use it to iron an item hung on a hanger without using a board or other tricks; besides, the steamer does not leave marks.
• After ironing is completed, the jacket should be left for some time without being worn. It must dry well and cool so that it does not wrinkle very quickly during wear.