How to make the silicone case fit tightly. Different ways to stretch leather and silicone phone cases
Then most likely you purchased a low-quality accessory from a dubious seller on an advance payment or received such an unpleasant surprise included with a smartphone from China.
Although this is not pleasant, you can still try to restore the silicone case. Why try? Yes, because it is not known how a particular case will behave when heat treatment, and yet some bumpers can be restored in size and bent edges corrected.
It is worth immediately noting that in this article we're talking about about covers made of thermoplastic polyurethane (TPU), this is the main material for the production of bumpers today, however, there are other material options, and it is difficult to predict how they will behave when processed in this way.
Restoration of shape by thermal method
Most often, this kind of deformation and stretching occurs when the covers are transported carelessly or when stored in improper conditions without a special damper insert. Such cases take an irregular shape and do not fit tightly on the smartphone. However, if such an accessory was made exactly to size, this can be corrected.
To restore the cover, we need two containers of water; it is very important that the size of the containers used is larger than the size of the cover itself. If you place the case in a small container, you risk deforming the accessory even more.
In the first container, you need to bring the water to a boil and leave it over low heat, and in the second, the water should be as cold as possible.
Lower stretched case into boiling water and hold for up to 5 minutes (time depends on the thickness of the cover). After the cover has warmed up well enough, transfer it to cold water, and if there are any deformations on the edges of the bumper, straighten them with your hands and in this position lower them into cold water.
Such a sudden change in temperature can cause a slight decrease in size, but if the case has a significant deviation in size, you most likely will not be able to reduce it.
How to buy a quality case?
Defects in accessories happen in any store, even the most famous ones, but the approach to solving the problem is the hallmark of good stores.
If you are forced to choose a case online and are unable to try it on and hold it in your hands before purchasing, you can always use the cash on delivery service. This service is provided by most delivery companies in Ukraine. And suspicious sellers who refuse to send you goods in this way should immediately arouse your suspicion.
Most likely, they are selling a low-quality product and are afraid that you will refuse it.
It often happens that it is not profitable for you, as a buyer, to pay the cost of delivery, and even the cost of the cash on delivery service, but the online store site meets you and pays for the delivery of any goods at its own expense. You can order a high-quality cover at a very inexpensive price, try it on at a Nova Poshta branch before paying, and at the same time not overpay inadequate amounts.
Return or exchange guarantee
A money-back or exchange guarantee for faulty goods can be very useful, most good stores are required by law to adhere to this rule and provide you with such a guarantee for a period of 14 days. However in the online store website such a guarantee is as much as 25 days! This is an opportunity to test the product in practice, without risking losing your money.
Please note that unscrupulous sellers also write about this guarantee, but they use free ad services and one-page sites to distribute their goods, since you will not be able to check reviews about such a seller or complain anywhere.
When choosing a reliable store, pay attention to the presence of a real address, reviews using authorization through social networks and high-quality advice on the issue that interests you.
Ask if you can come and see the product at the specified address? If the seller refuses to show you the product and insists on shipping it with advance payment or partial payment, he is most likely a scammer.
Our online store also has a channel on YouTube, and you can see what the type of case you are interested in looks like.
✉ EMAIL: Cooperation/Współpraca/Business Inquiries: [email protected] Easy money on clicks Link to this bumper/cover Don’t know how to make money? Ask me how and I’ll tell you. Well, let’s try to adjust the case to size? And here you will find even more descriptions and photos. Don’t forget about additional savings with purchases on Aliexpress. My choice of validated cashback from 7% to 18% savings on all products from Aliexpress Affiliate program that helps to promote your channel and earn My choice of validated cashback - from 7 to 18 percent savings on all products from Aliexpress Affiliate program that helps promote your channel and earn earn Link to the bumper/case this Well that will try the case to fit? And here you will find more descriptions and photos Don\"t forget about additional savings when shopping on Aliexpress. Source youtube.com/watch?v=KuNZYfaDQc8
Video content was added by " Alexa Online"to your video channel 4 years ago, it has already been viewed 163, 191 times. The video material was liked by 1212 and disliked by 1770 website visitors. What do you think about this video for Android? Write just below, let's discuss!
This video material for phones, smartphones, tablets and other digital devices can not only be viewed online on the Android.Net website, but also downloaded completely free of charge and without any registration in files: mp4, webm, 3gpp and even mp3. To download files, you just need to click on the “Download” button at the top of the site and move the slider all the way to the right. Do you want more interesting videos from this author? You have the opportunity to see more video for Android from this user, which are also published in the author’s official video channel https://site/s/Channel+Aleksa+Onle, as well as other similar videos related to Android phones, smartphones, tablets and other electronic devices. Our video site has a modern adaptive design that allows you to view videos on any portable electronic devices and on TVs with the Smart TV function.
Even a silicone case purchased for a specific phone model may not be the right size. If it was sent through an online store or purchased without “trying on”, then returning the product may be difficult. In this case, it becomes necessary to take action on your own. In this article we will look at how to stretch silicone or, conversely, compress it using available means.
How to stretch a silicone phone case
Silicone is a fairly durable material, which at the same time is very elastic. The latter property is associated with a significant disadvantage of such covers - they stretch over time. Well, if you want to speed up the process and increase the size of the overlay immediately, there are several effective ways:
The presented methods will help to cope with the problem of a small case if its size needs to be increased by 1-3 mm.
How to make a silicone case smaller
As already mentioned, silicone has a significant drawback - it stretches after some time of use. For this reason, the question arises of what to do if the silicone case is stretched. You can try to reduce it using the method below. The presented method has been tested by many people and is guaranteed to help solve the problem.
Before taking specific actions, you should know that the size will decrease by 1-2 mm. If the cover is very loose, then it is better to buy a new one and not waste your time. In case of a minor sprain, the following steps must be taken:
- Choose a pan that will allow you to completely fit the lining without touching the edges. Pour water into it and put it on the stove to heat.
- Bring water to a boil and place the accessory in it.
- Cook the lining for about 5-7 minutes, holding it with a fork so that the water completely covers the material.
- Remove from the pan and leave to cool completely.
- Wipe dry and try on the phone - the case has shrunk and fits tightly to the body.
Before performing the procedure, it is important to pay attention to the material of the lining. If the polymer alloy is transparent, it will become cloudy, but real silicone will not change its properties. However, for opaque accessories this does not matter. Some users note that they were able to partially restore transparency by placing the case on the battery for a while.
Not all cases fit the phone equally well. Many users are faced with the problem that the dimensions of the protective accessory do not match the actual dimensions of their device. For some, the gadget falls out of the case, for others, on the contrary, the case turns out to be much smaller than the device. Today RosCase will tell you how to deal with such problems, how to make a silicone phone case smaller or larger.
First of all, we want to protect you from such situations. Our main advice- do not buy the cheapest product from a dubious seller. Low price may mean that the materials used in the manufacture of the product are not of the highest quality. Therefore, full compliance with the high user requirements can be left as a wishful thinking. If the plastic case does not fit tightly, you can always try to return it to the seller.
It is much safer to choose accessories from well-known brands and carefully study the characteristics of the case before paying for the purchase. Trust our many years of experience - branded accessories are made with much greater care. The materials used are proven, and the dimensions are precisely adjusted to the dimensions and functional features of a particular device. Our website presents cases from such well-known manufacturers as Rock, Nillkin, Tetded, Nuoku, Mercury, etc. And all their sizes are ideal for the specified device models.
If you have already become the owner of a would-be case, first of all you can try to return it back to the store, based on its inconsistency with the specified model. Only if you fail to do this can you proceed with independent procedures and subject the case to various tests. After all, there is nothing left to lose.
What kind of aids for changing sizes are recommended on the Internet: hair dryer, alcohol, freezer, boiling water, acetone, even a microwave oven. We tested, in our opinion, the most adequate method - and we managed to shrink our experimental sample by a few millimeters.
So, for our experiment we needed the cover itself, a stove, a saucepan, and water. We boiled water and lowered the cover into it for 7 minutes. While the cover was cooking, hold it with a spoon so that it does not float up. After undergoing the rejuvenating procedure, the accessory went to cool down. When its temperature dropped to normal, we tried it on our smartphone - the case no longer fell off and fit tightly.
Let us clarify that our case was made of opaque silicone. This method has a very ambiguous effect on transparent cases, turning the transparent material into a matte one. Well, if the color of the case is not important to you, but its functionality is important, this is unlikely to stop you. But, in turn, we warned you. Having also conducted an experiment with several more pads, we came to the conclusion that not all of them reacted with compression to bathing in boiling water. Some remained larger than necessary in size. From this we concluded that this method is not suitable for every case, but you can still change the size of the silicone case. Unfortunately, you can find out whether this method is effective for your case only by conducting a similar experiment yourself.
How to solve the problem of enlarging the case
As for tips on how to stretch a leatherette phone case, slightly different approaches are used here. We all know that skin tends to stretch. A good leatherette also provides similar opportunities. By analogy with natural material You can try to stretch the case by putting a model of your device into it, for example, made of wood. First, the base must be split in half, installing a spacer in the center, which will increase the capacity of the case.
Experts advise placing this entire structure in warm water and leaving it for a while. After the spacer is removed and the case is dry, it should acquire a new desired shape that will allow it to be easily installed on the gadget.
Do not forget that before trying this method, you should, again, contact the seller and tell him your complaints regarding the defects of the ordered product.
Summarizing all of the above, we want to say that it is still possible to return the shape of a deformed phone case. But not everyone. Therefore, before purchasing protection for your device, make sure that it is perfectly compatible with your device by asking the seller for information. Then, if the slightest discrepancy arises, you will have a reason to return the case, and not look for ways to change its size. Have a nice case!
The cell phone case is a little inappropriate in size. How to stretch it?
How to stretch a leather phone case?
- Soak in alcohol-glycerin solution.
- Insert a piece of wood into the cover of the shape to which you want to stretch the cover. Wait a day.
How to stretch a silicone case?
- Soak in hot water.
- Immediately after heating, place on a wooden mold.
My cell phone case didn't fit a bit. That is, the mobile phone fit in there by tension. At the same time, the buttons turned on and the display lit up. I solved this problem by wrapping the phone in paper and putting it in a case overnight. You can add paper as you stretch the cover and increase its size. After two or three weeks the problem was resolved.
To stretch leather case, make a model of your phone from a piece of wood (the thickness should be slightly thicker than the phone), split it in half lengthwise and insert them into the case. Between the halves, insert a plastic insert of the thickness to which you want to stretch the phone and put it in a jar of warm water for a day (you can put the jar on the battery). Remove the case from the water and air dry.
Alternatively, instead of water, you can use alcohol to significantly reduce the drying time.
Why a tab? Because after drying, the cover can compress the model so much that it will be impossible to remove the piece of wood. In addition, the tree will also swell from water. And plastic, even sandwiched between pieces of wood, can easily be pulled out. Just remember to make the insert long enough so that you can grab onto it later.
Don't want to bother making a layout? There is an easy way, but the quality is not guaranteed.
Just insert pencils, felt-tip pens, round rods, etc. inside the case along the edges. of the corresponding diameter, and push the rectangular part between them with tension suitable size. The rest is the same as described above.