How to make a paper frog origami project. Origami frog: master class with detailed video in Russian
Origami frog is a pastime familiar from childhood, when entire competitions were held to determine the best jumping ability of this character.
And whoever forgot, let's refresh your memory and pass on the craft of creation to the children so that they can play with a cheerful frog, incredibly jumping and funny.
How to make an origami frog?
Initial stage
For work you will need colored paper square shape.
The first step is to make cross folds. Therefore, fold the paper in half from corner to corner to form a triangle. Then double it again, connecting the remaining two corners.
You will need one more fold, but now you need to fold the paper so that you get a rectangle, that is, connect one side to the opposite.
Redirect the resulting fold to the middle.
Fold the piece, smoothing out all the folds.
The result will be a triangular-shaped part. Pull the right corner and connect it to the top.
Do the same with the left corner.
Now fold the right corner and the side of this resulting part, aligning them in the center.
Fold the left side. We're done on this side for now.
Turn the triangular paper piece over to the other side.
Point the right corner down, aligning it to the center.
The left one should also undergo this procedure.
Here, bend one side to the right, aligning it with the edge of the part.
And the second - to the left.
Final stage
Turn the piece over to the other side. In order for the frog to jump, you need to make a fold in its lower part. To do this, first fold the bottom part up.
And then direct it in the other direction, as if inside the frog. You can immediately make the desired fold, although it is much easier step by step, since the paper in this area is thick and the necessary actions require a little effort.
The origami frog is almost ready. All that remains is to lift the tip in the front part and bend it to the side.
Then the second one.
On the resulting protruding triangles, draw eyes or glue moving ones, which will make the frog even more funny.
You can also attach a long tongue, but if you are planning a serious competition to see whose frog can jump the furthest, it is better to do without it.
Making paper figures helps children develop creative skills. They love to create something out of paper and, of course, love to make different animals out of it. From this article you will learn that a DIY craft will definitely improve your mood and bring joy to your children. It is known that there are several variations of paper frogs.
Let's take a step-by-step look at several popular methods.
DIY paper jumping frog: step-by-step instructions
1. Take a square sheet of paper and fold it in half.
2. The resulting rectangle needs to be folded in half again, and then folded back.
3. On a sheet of paper you need to mark a line and diagonals. Next, you need to fold the top corners, left and right, bending them to opposite lines.
4. From the top square, fold geometric figure- “double triangle”.
5. The bottom square must be folded in half until its folded edge touches the bottom of the triangle.
6. Bend the side edges of the rectangle that appears at the bottom towards the center, not reaching a little to its middle.
7. Bend the bottom part of the origami in half again.
8. The bottom rectangle needs to fold the top corners towards the center.
9. Lower the ends down and bend them outward.
10. On the front side of the triangle, lift the ends up.
11. Fold the craft in half in the center and turn it over.
You should now have a jumping paper frog. A handmade craft will bring joy to you and your children. In order for her to jump, you just need to press the back of the wah and release. It is precisely this property of “jumping ability” that will be interesting to apply for different games. For example, whose wah jumps the farthest is the winner. The secret of its “jumping ability” also lies in the fact that the smaller the frog, the farther it will jump.
Rectangle frog
To make this wah, take a rectangular sheet of paper. Fold your sheet in half vertically. Next, along both diagonals, make bends in the upper part. Then fold along the fold lines and bend inward. You should end up with a triangle. To create the front legs of your frog, you need to bend the corners diagonally.
Now the bottom piece needs to be bent in half horizontally. Then bend it towards the middle on both sides. And fold the bottom part of the workpiece in half again. Then you need to pull the corners down. To create the hind legs, fold the corners diagonally. Now bend the frog in half and bend the legs back. All that remains is to turn your work around.
Talking or singing wah
Take a sheet of paper and fold it twice along two diagonals. After adding along the last diagonal, you need to connect the left and right corners with the center line. At the bottom, the remaining rectangle needs to be lifted up and folded. Bend the corners on the sides in the opposite direction. Turn the workpiece over and fold the bottom rectangle up. Then bend the side corners.
Now unfold and fold into a square. Next, bend the bottom corner up. Turn over and repeat the previous step. Flip over the center and open the sides. You will get a square again. Fold the piece in half along the center line. All you have to do is insert your fingers into two holes - and your frog is ready.
Easy to create and decorate origami
Interestingly, the manufacturing process itself takes very little time. The paper frog you created, made with your own hands, will surprise you with its ease of execution.
All you need is a simple sheet of paper: notebook, landscape or colored. You can also use special sheets for crafts.
To decorate, you will need watercolor paints, colored pencils or markers. You can paint your frog according to your taste and desire. For example, draw eyes or webbed feet for your frog, and you can also make pimples on the back of the “jumper.”
Now you know how to make a paper frog with your own hands. Step-by-step instructions will help you make this simple and entertaining craft. Interestingly, the frog is useful for playing with children, and you can safely organize “frog races” with the whole family, having fun free time.
Origami toad is one of the most popular paper origami. If you don’t know how to make an origami toad, then on this page you will find everything you need to assemble this simple paper figurine.
In the first photo you can see what you will get if you follow the assembly diagram below. The second photo of the origami toad was taken by one of our site users. His toad is not much different from a frog, but looks quite realistic. If you have photos of origami you have collected, send them to: This email address is being protected from spambots. You must have JavaScript enabled to view it.
Assembly diagram
Below is a diagram of how to assemble an origami toad from the famous Japanese origami master Fumiaki Shingu. If you strictly follow the instructions, then assembling the origami toad will not take much time, and the result will be the same as in the picture. After doing what is described in the diagram several times, you will understand how to make an origami toad quickly and without looking at the diagram.
Video master class
Assembling an origami toad may seem like a daunting task for beginners. Therefore, we advise you to enter the query “origami toad video” on the largest video hosting site on the Internet, YouTube. There you will find a lot different videos about origami toad, which clearly shows the steps to assemble a toad. We hope that after watching the video of the assembly master class, you will have no more questions about how to make an origami toad.
This video will help you learn a simple paper toad:
This video lesson will teach you how to assemble an origami toad in a short time:
Symbolism
Attitudes towards toads vary in different cultures; according to Christian traditions, for example, a toad is a symbol of evil spirits, greed, and sins in general. But in the East, the toad was considered the embodiment of the bright principle.
All children love funny and mischievous animals, so origami jumping frog is one of the most popular. Many people have it in their apartments indoor plants, so this decoration for pots will be original and interesting. Because origami is not only good way spend your free time usefully, but also great way development fine motor skills, which has a positive effect on the development of the child.
Preparation
Many people are interested in how to make origami frogs with their own hands. It’s not difficult to make such a craft; you need to choose the model you’re interested in, select materials and find a suitable pattern.
Anyone, from a professional to a beginner, can find a scheme that is right for them. To make such a frog, you will need:
- colored paper;
- scissors;
- ruler;
- pencil.
Model selection
There are several types of origami crafts, and patterns for folding frogs are varied. Therefore you can choose:
- simple, classic version;
- jumping frog;
- frog princess.
Any of them will decorate the interior of a room or be a good toy for a child. You can look at photos of origami frogs and choose the option you need.
Simple frog
This model is suitable for beginners because it does not require special skills or effort. Below is step by step instructions for beginners, which will simplify the process of creating crafts.
Take a sheet of colored paper and use a ruler and pencil to draw an even square. We cut it out, and the blank for the future frog is ready. Fold the resulting sheet diagonally, and then straighten it again.
The sides need to be bent towards the center, that is, towards one of the diagonals. After these steps you should get a diamond shape. Opposite corners also need to be folded towards the center. Turn the corners out and turn them diagonally.
Turn the tail three times and bend the entire model in half. Tuck it up with the obtuse corner of the triangle, and bend the right corner inward.
The frog is almost ready. Fold the corners of the muzzle so that it takes a standard shape, and then bend the paws.
There are also other models for creating such an origami figure.
jumping frog
The next master class on how to make an origami frog will help you fulfill a real legend from our parents’ childhood. Many mothers and fathers will remember these frogs that they made during breaks at school.
Take a square sheet of colored paper and place it with the wrong side facing you. Fold the sheet in half horizontally, and then return it to its original position and fold it vertically.
Fold the sheet vertically again right side top left. In the resulting model, bend the upper part in half, and then diagonally and bend it again. Using the marked folds, form a triangle at the top. Bend and straighten the lower part of the model.
Fold the sides so that you get a “mushroom”. Fold the bottom in half, straighten it, then pull the inner layer and pull the corners down along the dotted line.
Bend the side corners diagonally diagonally. Fold the model in half, and then down again, so that one part is larger than the other. Flip it over and the frog is ready for buckles.
Frog Princess
This type of paper frog is more complex and time-consuming, but the result will be beautiful and original. The model will be made in modular technology, that is, assembled from several parts.
For this craft you will need 350 green and 95 white modules. One sheet of colored paper produces about 30 pieces. The whole point comes down to creating one module and assembling a three-dimensional figure from them using glue.
To create one part, you need:
Take a rectangular piece of paper and fold it in half. Bend it back and fold both halves towards the middle to make a house.
Turn over and bend the corners to the center line. Raise the edges to the top to form a triangle and bend it in half. So we got one module.
Origami is real magic, because an interesting and unusual figure is created from ordinary paper in just a few minutes.
You also don’t need to spend a lot of money to show your child and teach him how to do a real miracle. It's safe and interesting hobby even for the smallest children, so you can make such frog models and have a good time with your child.
Photos of frogs using origami technique
Are you coming up with new fun for children? Then it will be useful for you to learn how to make a frog out of paper - a funny jumping frog or a frog that opens its mouth in a funny way. You can put together a whole family of toy amphibians using the simple diagrams below. Then have a comic competition to see whose origami frog can jump to the goal the fastest. From large sheet you will get a real princess frog, and from the smaller leaves her wonderful little frogs will come out. All you need is paper, and any felt-tip pen will provide you with the eyes of your animal. The tongue is an original additional application. Shall we begin? Don't worry, our step-by-step instructions will guide you through every step of the process.
Option 1: the simplest manufacturing scheme
Let's start with a very simple diagram. A frog folded according to this pattern is perfect for warming up and for understanding the general principles of the origami technique.
Figure 1: simple circuit frogs
Option 2: jumping craft
Figure 2 will show how to make a frog out of paper in a couple of minutes. As you can see, in order for the frog to jump, the folds of the sheet are made according to the principle of a spring, which gives the shape of a funny amphibian. Nothing complicated, even kids can do it. It’s not difficult to make the little frog jump: you need to press your finger on the back of the toy and sharply release it, “sliding” back. However, first things first and in order:
Figure 2: Jumping frog
- First, let's learn how to make a frog from a rectangular sheet slightly narrower in shape. Divide such a sheet into 2 equal squares with the middle bend;
- Fold each of the squares so that a diagonal marking is formed in them (see Fig. 2), fold the future frog by bending the planes inward, as the diagram shows;
- Bend the free corners with the “ears” outward - this is the beginning of the formation of a spring mechanism to which the jumping frog will owe its skills;
- Turn the workpiece face down and form the head part of the toy, bending the upper corners of the part towards you (pressing the bends tightly);
- Grabbing the lower “legs” together with the main part of the part, make 2 folds of the workpiece, forming a push spring for the back of the amphibian;
- The jumping frog is folded, all that remains is to draw its eyes and glue the tongue. This way it will become even more interesting - much more realistic and funnier.
Similarly, you can fold such a craft from a square sheet correct form. Everything here is even simpler than with a rectangular paper blank (see Fig. 2). Use different sizes of paper, thinking about how to make the jumping frog larger or smaller. But a toy that will participate in competitions for the distance or height of jumps must all be made from a sheet of paper of the same size (large frogs jump both higher and further).
Option 3: funny frog that opens its mouth
Have you folded a wah that jumps? A croaking frog will be no less funny, and it will take no more time than its predecessor. It also needs to be made from a square piece of paper folded into a regular rectangle. Let's take a step-by-step look at how to make a croaking frog. We recommend taking a larger piece of paper for “rehearsal”, this will make it easier for you to master the folding algorithm. So:
- Line a square sheet folded into a rectangle (edge up, as in Fig. 3) with folds according to the pattern, pay attention to the resulting “pockets” in the upper corners of the workpiece;
- Next, fold the bundle in stages, based on the diagram, systematically bending the corners mainly from the “head” part of the toy;
- Having obtained the “house” shape of the blank, bend the front planes of the toy. You have already succeeded in making a toad, and only your acting skills are responsible for sound production;
- By stretching the frog's face with its mouth opening in different directions like an accordion, you can imitate a talking or even funny singing amphibian.
Among all the paper characters, this frog occupies a special place. This is not a decorative, but an exclusively playful friend of every child, motivating the director's inventions. Every time the baby will give the paper frog new role: a marsh tree frog, a funny singer, a talkative “clever girl”, etc. And, of course, making such a toy with your own hands is an excellent practical skill, one of the new stages in understanding the art of origami.
Option 4: finished paper frog
Figure 4: assembled with glue
Don’t understand how to make an origami frog using the described options or don’t want to deal with it? Ready paper pattern(diagram 4) is your easy option for making a funny toy without any difficulty. Paper craft funny frog - already ready-made template, which can be printed in any desired size. All that remains is to cut out the parts and assemble them with glue in 1-2 minutes. How to make other animals out of paper, see our “Origami” section. Here are the most interesting paper crafts(, graceful, spring and other flowers, figurines paper technology, classic crafts, like