How to make voluminous stars? Do-it-yourself volumetric star made of paper: step-by-step master class 3D star made of paper yourself.

If you want to decorate your home for a holiday or just like that, and you want to do it yourself, then a star is one of the elements that will always look beautiful in a room, on a stele, on a chandelier or Christmas tree.

In this master class you will learn how to make stars with your own hands using a huge number of different methods.

All the methods are quite simple, so everyone can choose what they like best.

The main material from which you can make a star with your own hands is paper. You can use cardboard, plain paper, thick paper, magazines, old books, newspapers.

How to make a three-dimensional star out of paper?

Five-pointed star.

You will need:

- printer

- thick colored paper

- scissors

1. First you need to print the blank.

2. Cut out the templates and bend them in the places indicated by the dotted line.

3. Glue all the parts together and you will have a three-dimensional five-pointed star!

Scheme on how to make a star

2. Using scissors, make cuts along the perpendicular fold lines. The cut should be approximately half a line or slightly less. In total you need to make four such cuts.

3. Fold the edges as shown in the image.

4. Now prepare the glue and lubricate one of the sides of each ray of the future volumetric star and glue it together (see picture).

5. Make the other half, following the same instructions.

6. Finally, glue the two halves together and decorate to taste.

How to make a star out of paper?

Making such a star is very simple. It is made of just two stars cut out of cardboard or thick paper.

You will need:

- pencil

- ruler

- thick colored paper or cardboard

- scissors

1. Draw a star on thick paper or cardboard.

2. You can decorate the stars as you like and cut them out.

3. Now you need to make a cut on each star - on one it should go from top to bottom (from the outer corner to the center of the star), and on the other, vice versa, i.e. from bottom to top (from the inner corner to the middle of the star).

4. Using the cuts, connect the two stars by inserting one into the other.

How to make a paper star? Convex star.

These beautiful little paper stars will be an excellent decoration for your interior, postcard or gift.

You will need:

- colored paper (you can use pages from an old magazine)

- scissors (stationery knife)

* The key point in this master class is the correct cutting of paper strips.

* Stripes must be even. In this example, their width is 9mm and length 221mm.

4. Let's move on to the most interesting and at the same time simple process- making an asterisk.

Wrap a long strip around each side of the pentagon. You need to do 12 to 15 wraps. This means that each edge needs to be wrapped at least twice.

5. Tuck the remaining tip of the paper inside your star.

Hold your pentagon with two fingers of one hand. At this time, use the fingertip of your other hand to lightly press on one edge. You need to get to the middle of the edge.

This process needs to be done with all the edges and you will get a beautiful star.

How to make an origami star?

You will need: paper, scissors. Cut the paper into squares and fold according to the pattern.

A paper star will not only decorate your home on the eve of the Christmas holidays, it will be suitable for educational activities with children. 3D star It’s quite easy to make from paper with your own hands, and joint lessons will help develop the child’s imagination and hand motor skills.

An ordinary piece of paper can be a suitable space for creativity. Having given it the desired shape, the craft can be decorated by coloring it with felt-tip pens and paints. Imagination and manual dexterity will help your child create a masterpiece. This article will tell you how to make a three-dimensional star out of paper.

Required materials and tools

All the tools and materials that may be useful in work can be found in everyone’s home. Therefore, absolutely anyone can do this work. To create a star you will need:

• sheet of paper;
• protractor;
• compass;
• scissors;
• a simple pencil;
• decorations.

Instructions for creating a volumetric star

Start making crafts by choosing paper. For work, you can use either a regular sheet, or a bright multi-colored one with your own hands, which can be made from durable material; in this case, the craft will be quite dense, and it can be used as a decorative decoration for a room or a Christmas tree decoration.

On the back of the colored paper you need to draw a circle, the diameter of which will correspond to the size of the star. A compass is suitable for these purposes, but if you don’t have one, then you can use a saucer or other round object. After this, you need to draw a line from the edge to the center of the circle.

At the second stage, a transport ruler will come in handy. With its help, you need to mark an angle of 72 degrees from a straight line and draw a line. In this way, you need to mark the entire circle - you get five lines.

The next step is to connect all the lines into a star. In the center of the part you need to draw additional lines as illustrated in the picture. After this, the star needs to be cut out and bent along the main lines so that the drawing faces inward. If thick paper was used in the work, then you should work much more carefully on the folds so that they are as pronounced as possible. For these purposes, you can use any blunt object (ruler, back of a knife, etc.).

A voluminous star made of paper is made quite quickly with your own hands. Finally, you need to make a small loop so that beautiful craft could be hung on a Christmas tree or somewhere else.

Double volume

This option is a continuation of the first instruction, which tells how to make one convex part. This master class will tell you how to make double volume.

According to the previous example, two similar elements should be performed. A 3D paper star template is presented below. Its difference lies in the fact that there are additional elements intended for gluing parts.

The elements cut out from the template need to be shaped and glued together according to symmetrical additions. All you have to do is wait until the glue dries, and the volumetric paper will be ready.

Star from book pages

And although this star looks very beautiful, many may not be happy about having to spoil books. This is not at all necessary, because they can be replaced with old magazines, newspapers or technical publications.

When thinking about how to make a three-dimensional star out of paper, first of all you should worry about the materials and tools necessary for the work. You will need a voluminous paper star; it can be made by following the master classes presented above. In addition, you need to prepare scissors, glue, and an old book.

The first step is to make a lot of paper bags. For each of them you need a paper rectangle equal to one-fourth of a book page. When many parts are ready, they need to be glued to the paper star as shown in the photo. Finally, apply a little glue to the bags and sprinkle the craft with glitter.

Making a voluminous paper star with your own hands is quick and easy. To make it a wonderful decoration for a room, Christmas tree or gift, you can experiment with colors and sizes. Such elements can be fastened together using threads, glue or double-sided tape.

As a rule, the older a person gets, the more nostalgic he begins to remember his childhood years. For many adults today, this time is permeated with Soviet symbols, among which red stars can be noted.

In this master class I will show several options on how to make a star out of paper with your own hands step by step photos. This five-pointed symbol may still be relevant today. For example, a red star is perfect as or for decoration New Year's interior. It is not difficult to make it from paper, focusing on the proposed master classes.

01. DIY voluminous paper star

To create a three-dimensional star, we will need to prepare:

• red paper;
• scissors;
• pencil;
• ruler;
• PVA glue.

First, cut out 5 squares of the same size from red paper.

Our blanks have a side of 9 cm.

After this, you can begin to add each square. First we make a diagonal fold.

Then we unfold the square blank. Right side let's bend towards the middle.

A similar fold should be made on the left side.

Now we need to make bends in the upper part of our workpiece. First we bend the right side.

After this, we make a fold on the left side. Our blank took the shape of a rhombus.

Fold it in half.

The top layer needs to be folded to the side.

In this case, you should pay attention to the fact that on the reverse side the vertex of the triangle coincides with the fold line.

Unfold the workpiece slightly.

Smooth the fold lines.

Now we begin to straighten one of the rays of the future star.

Carefully straighten its inner layer.

Now we give the workpiece the following appearance. We have an element consisting of one whole beam and a half.

We need to make 4 more such blanks.

You can start assembling the star, and for this you will need glue. Apply it to one half of the beam.

After that we insert one element into another.

So we connected 2 modules.

We glue the remaining elements together in a similar way. Our volumetric paper star is ready.

02. How to make a star using modular origami technique

Technique modular origami allows you to create three-dimensional figures using the same elements. Our master class presents the step-by-step production of a star from several modules.

To work you will need 10 square sheets of paper. We took red writing sheets.

We start by making one module. For it we need two sheets. First we bend them along two diagonals. Now these same sheets of paper should be bent in transverse directions, but in the other direction.

From one we fold the workpiece in the form of a double square.

From another sheet of paper with pre-designated folds, we fold the workpiece in the form of a double triangle.

Now we insert the triangle inside the square.

We bend the protruding ends from the square inward. First we do this from two opposite sides.

Then we unfold the module blank and bend the protruding corners again. This is how we got one of the modules.

We need to make 4 more such modules for the future star. Let's start connecting the modules. They will be attached to each other due to the corners protruding on the sides.

Two corners of one piece should be inserted under the folds of the other from the inside.

We insert the corners of the other module from the outside under the folds of the adjacent one.

So we continue to connect the individual modules.

We close all 5 elements into a ring.

You can leave the origami star as is, or you can slightly raise its upper part.

03. Volume star made of paper for a postcard

On a white sheet, draw a star stencil, as in the photo, and prepare a sheet of red cardboard.

Cut it out.

Bend the workpiece - all the short strips are bent inward, and the long strips are bent outward. Glue it to the base. This way you can make a three-dimensional star for a postcard for February 23 or May 9.

How to make a five-pointed star out of paper video tutorial

Good afternoon, today I am publishing an article in which I have collected the most different ways do New Year's stars with your own hands. We will make stars paper, cardboard, sew stars from felt, crochet them. You will see simple christmas crafts, accessible to children, as well as complex designs in the shape of a star.

Here are the ideas I collected today in one general pile:

• Stars made from strips of paper using the quilling technique.
• Transparent stars with stained glass film.
• Three-dimensional stars in 3D technology.
• New Year stars window stickers.
• New Year's garlands with stars.
• Six-pointed stars with convex edges.
• Stars made from cardboard modules.
• New Year's stars from the newspaper.

So let's start our New Year's star crafts.

Craft idea #1

Paper star

using the QUILING technique.

Here is the first idea - a New Year's star made from strips of paper, twisted and glued using quilling technique.

Even if you are not yet familiar with the technique of twisting paper strips, then you just need look carefully See the photo below to understand how this paper star is made.

First, we assemble the paper strips individually five rays– and then glue them together.

In the photo below, I even highlighted each detail of the paper strips separately - in different colors.

Each ray of a star consists of three short oval twists of paper strips - light green lines. One twist is longer – orange line. AND one rolled paper tape , which wraps all these twists together - in the form single frame– pink line in the photo below.

You yourself will be pleased with how quickly your homemade New Year's star made of paper turned out. You can make several of these and hang them on christmas tree as decoration.

And using a very similar principle, we can create stars like this. This is also essentially QUILLING. But here the shapes are no longer so smooth and rounded, but more clear and faceted. But the principle is the same.

If you look closely at the photo below, you will see that each of the rays of the star is 2 triangles glued together its longest of three sides.

That is, we cut 10 identical strips of paper. From each we make a paper triangle. We divide all ten triangles into pairs. And we glue each pair together with the long side. We get five rays future star made of paper. Glue the rays together. We cover the center of the gluing with an asterisk. Use a hole punch to make a hole in the top beam so that you can hang it on the tree by a thread.

Craft idea No. 2

New Year's star

FROM toilet paper rolls

And here is the next DIY star idea similar to the previous technique because here, too, round paper loops are glued together. Only the loops here are not glued together from paper strips, but are roll cuts from toilet paper – and a transparent colored film is stretched over each section ( cling film, or colored tape).

.

We will need a roll of paper towels or toilet paper. And we will also need multi-colored transparent pieces of film to cover our paper blanks for the star.

Where to get transparent color film for this New Year's star craft.

Option 1 – food grade colored polyethylene.

Option 2 – colored transparent candy wrappers.

Option 3 – colored transparent packaging from bouquets, or gift wrapping in stores with a gift design department.

Option 4 - colored wide tape - sold in construction or finishing stores.

Option 5 - transparent finishing film from a hardware store. It is sold in such large rolls as wallpaper - but they can be bought in any pieces - at least 1 meter, at least 10 cm. They are cut from the roll and sold. But first you need to make sure that this film, when separated from the paper base, gives a transparent color - that is, it transmits light. Check it right in the store - peel off a corner of the film from the paper base right on the roll and check it for transparency.

How we will make New Year's transparent stars.

We cut the paper roll into identical ring parts - and bend these parts ray shapes And mid-pentagon for our future star.

To fold the pentagonal center, you need measure the circumference of the roll and divide it into 5 equal parts. And bend in the places marked with a pencil.

And now for every ray of our star we must bend BASE, which in length will coincide with the length of the side of the pentagonal center. To do this, bend the roll along the edge and measure with a ruler half the length of the side of the pentagonal center stars.

Using the same principle, we wrap the remaining rays of the cardboard star in film (or colored tape).

And now our task is to glue all the parts of the star into one - connect the rays with the middle.

The easiest way is a piece of double-sided tape. Scotch tape with sticky edges on both sides.

Or you can spread it with PVA glue and dry it in a pressed form - squeeze it with clothespins

And when assembled, such a star is hung near the window - so that it lets in light and looks like New Year's craft made of glass.

By the way.

If you have a glass cutter and colorful pieces of glass left over from old interior doors, then you can make real glass New Year's stars.

Craft idea No. 3

New Year's star

using the VEER technique.

In the photo below we see a six-pointed star made of paper. Even a child can do it in a circle children's creativity. You don’t need to draw anything with a compass or make complex calculations. All you need is 1 square sheet of paper, folded into a fan. And another square newsprint(smaller size).

A master class How to make such a New Year's star with your own hands looks like this. Fold the square sheet into a fan like this: to make six sides– that is, three folds of the fan only (as in the photo below).

Can I get a sheet right away? measure the width and divide this figure into 6 equal parts. And mark these parts with a pencil and make folds along these marks - then we will get a fan of six identical accordion blades.

And if you make patterned slits in such a star (like in a snowflake), you will get a patterned New Year's star made of paper - with a beautiful openwork pattern on their rays.

That is, we supplement the fan itself (still folded) with slits. And then we stitch the middle of the fan with a staple, fold it in half, unfold it in a circle and glue the blades of the meeting halves together.

Craft idea No. 4

New Year's star

from twisted triangles.

Here we see a seven-pointed star made of paper. Due to the abundance of rays, it looks more like a snowflake. But if you change the shape of the triangle to a more elongated one, you can get a design with five rays. We place each such tube on a round paper base coated with glue.

Craft idea #5

Paper stars

In the form of a garland.

A paper star is often used as an element New Year's garland. Here I propose to consider three ways to make such a star garland for the New Year.

Option #1. Here is the simplest and quick way put stars on a string. You need a sewing machine and star silhouettes cut out of cardboard.

Refill in sewing machine thread, place a star under the machine foot and machine stitch through the star. Moreover, when the line reaches the edge of the star, we do not stop the machine but continue to sew to get a long thread twisted into the line. After a few centimeters of such an empty chain line, we again place a cardboard star.

Option #2. You can make a garland of voluminous stars using the same principle. They are made according to the krishka principle - several star silhouettes made of paper are placed on top of each other and fastened with a common machine seam. Or first you can paper clip these multi-layer stars.

For a garland of paper stars it is not necessary to buy colored paper. You can use pages from old books or a musical staff.

Option #3.

Or you can make a garland of voluminous stars with smoothed edges. If you make holes in such paper stars with a hole punch, then you can stretch the thread through them and we will get a starry New Year's garland.

Here clear master class, which clearly shows how to make such a three-dimensional 3D star from cardboard with your own hands. As we can see, with a sharp stick under the ruler we iron the arrows of the star. And then the ironed lines will easily bend into the convex folds we need. And we will get a star with faceted rays.

We bend those lines that lead from the center to the tip of the beam outward. And we bend the lines that lead from the center to the interradial point inward.

Craft idea #6

New Year's star

with smoothed edges.

But below is another simple way to make a star out of paper. Here you need a template (the star drawing itself) and a ruler with which we will smooth out equal folds of each face of such a star.

Look at the picture and you will see that this is a simple flat six-pointed star. It was cut out from a flat sheet of paper. And then each edge was bent - in sequence we bend one edge outward, and bend the next edge inward.

To draw a six-pointed star on paper yourself, you can use ruler or compass. First, we measure the distance from the middle of the circle to its edge (that is, we find out the radius of the circle). And then we measure this radius along the entire circumference with a ruler or compass. Only six of these radii fit along the entire circle. These marks will be the points of the rays of our star with six rays.

Or you can use the ready-made stencil in the picture below. You can trace it directly from your computer screen, just place a piece of paper on the glowing screen - the star will shine through the paper - and use light pencil lines to trace the outlines (or just the corner points). And then remove the sheet from the screen and circle everything with a bold line.

If you want increase or decrease size pictures on the screen, this can be done using the buttons of your computer.

Press the button with your left hand Ctrl on your keyboard (it's on the bottom row on the left) - and while the button is pressed, you use your right hand turn the mouse wheel- forward to increase, back to decrease. And the size of all pictures on the screen changes, increasing or decreasing.

Craft idea No. 7

New Year's star

From paper modules.

But here is a star made of paper, which is folded by connecting individual paper modules together. How exactly to fold such a star out of paper is shown in detail in the diagram below.

These paper New Year stars can be made as independent Christmas tree decorations. As a decorative star for decoration New Year's holiday. Or you can dot a ring for an Advent wreath with these paper stars.

Craft idea #8

New Year's star

From cardboard.

But simple craft volumetric New Year's star, made of cardboard. Here (as you see in the photo) you need to cut out two identical silhouettes of a five-pointed star from cardboard.

After in each make a cardboard star cut with scissors - in a straight line, leading from the lower interbeam to the upper apex of the beam - but don’t finish it to the end, and stop at the central point of the star.

When we we place one slot on the slot of the second cardboard star– we get a cross-shaped connection of two strips (perpendicular to each other). In the end it turns out 3D star.

Here's an option when 2 stars, also cut out of thick cardboard, do not fit on top of each other - but simply lie on top of each other so that the rays of the upper star are located between the rays of the lower star. If you make openwork slits in such a cardboard star with a blade, the star will look more elegant. And the gold sprinkles will make such a New Year's star completely festive.

Craft idea No. 9

Cardboard stars

DOUBLE SIDED.

Method 1 – four-beam blank

You can make a star with four rays out of paper - then make the same second one and connect them together.

Here detailed master class with a description of how to make 2 blanks with your own hands and connect them together into one star.

Method 1 – three-beam blank.

And these three-dimensional paper stars are also made from two modules, glued one to the other. Only here the module is not made of four beams, but of three.

IN flat view This module has this triangular shape with notches and fasteners on all three sides.

We bend the module along the longitudinal line of each of the three corners of the triangle. The cut modules are placed on top of each other using notch-serifs. And it turns out a three-dimensional star with six rays.

Craft idea #10

Paper stars

Using ORIGAMI technique

You can make a star using the origami technique. That is, from an ordinary square sheet of paper WITHOUT USING SCISSORS. This is what distinguishes fashionable Japanese technology origami is the art of transforming a square plane into a figure of any complexity.

This star is also obtained from one square sheet of paper. But the process looks quite complicated. But once you understand it, you understand the speed and ease with which these stars appear. And having made 4 such stars, you acquire high-speed automation and can add stars almost blindly.

Here is another star made using the origami technique. Where a paper module is made from a square sheet. And from such ray modules we create a solid star made of paper.

Craft idea No. 11

New Year's stars

Transparent for the window.

You can make a star out of paper to stick it on the window. Such stars look very elegant. And this is an alternative to the classic ones paper snowflakes, which we are all used to gluing on windows during the Christmas holidays.

Making such a New Year's star out of paper is quite simple. A strip of paper is folded in half. Its ends are curved to give it a pointed shape. We attach the resulting module to a round base sheet. Or we immediately attach it to the window - to an imaginary circle.

Depending on the shape of the folds we made to give our rectangle a pointed shape, we will get different shapes star rays. Thus, by showing some EXPERIMENTAL creativity, we will be able to create more and more designer New Year’s stars for the window.

Craft idea No. 12

New Year's stars

from a rolled up newspaper.

And here is another star made of paper - or rather, from a sheet of newspaper. Here a thin twist is made from a newspaper spread. Can be placed inside a rolled newspaper copper wire- this way the bent star frame will be given additional rigidity.

After this, the blank star from the newspaper can be decorated. Paint it with paint, wrap it with thread, coat it with glue and cover it with glitter. Or something else according to your imagination.

These are the ideas I have collected for you in this article. Now you know quite a lot of ways to make a star out of paper with your mind and your own hands.

Olga Klishevskaya, especially for the site ""
If you like our site, you can support the enthusiasm of those who work for you.
Happy New Year to the author of this article, Olga Klishevskaya.

The star has long been an image-symbol carrying its own meaning. We are used to seeing a star on the top of the Christmas tree for decoration and in the interior of our rooms the day before winter holidays and on New Year's Eve.

So that you can also decorate your favorite corner and make it a little more cozy, you can try making a star out of paper and cardboard with your own hands. Although it is simple, such crafts look very interesting and impressive. From ready-made small stars you can make a garland or a whole composition, or simply throw volumetric stars from paper into a box with a gift. It will look great!

• A five-pointed star inscribed in a circle is nothing more than a symbol of perfection. It means the 5 elements (5 elements that make up the whole world).
• The six-pointed star of Bethlehem refers to the Nativity of Christ.
• Eight-pointed - began to bear the name of the Virgin Mary.

How to make a star out of paper? Different ways

So, the first and quite popular way of making paper crafts is a technique called quilling. It consists of creating certain compositions from strips of colored paper, twisted in a certain way and connected to each other.

To do very a simple star from quilling step by step, us you will need: strips of paper of several colors (you can buy them at a craft store or cut them yourself, the desired width is 5 mm), scissors, PVA glue, an awl, a pen rod or a toothpick (to wind the paper strips).

For each ray, you need to make 3 small elements in the form of a leaf or drop, one medium one, which will be in the middle, and one more - the largest one, encircling all the others. First connect the middle loop to one of the small elements, then glue two more on the sides. And only at the end encircle the entire resulting part with another strip. Do this in several layers to make the loop stronger. Make 5 of these parts and glue them together. Our first star is ready!

Gallery: paper star (25 photos)

Volumetric eight-pointed and five-pointed star made of paper

The simplest way

There is also a simpler version of a voluminous five-pointed star. Simply cut out 2 star parts using a template or a self-drawn diagram. To make the drawing even, you can first draw a circle and then fit the finished star into it. So all the rays will be the same in length. Better to use thick cardboard, Can different colors. In each of the parts, make a cut to the centers. In one - in the center of one of the rays (upper), and in the second - in the center of one of the recesses (lower). All that remains is to insert them into each other and that’s it.

All these options are more suitable, for example, as Christmas decorations or just pendants for anything, as they turn out quite large size. But you can also make small convex stars. They will look very interesting as a garland if you string them on a strong thread. So how are they made?

Small convex stars

To make such stars, prepare strips of paper 9 mm wide and 221 mm long. It is important to make them even so that there are no difficulties in further work. Make a loop closer to one of the ends and insert the end of the strip into it. Then remove it inward from the back side of the workpiece, and wrap the remaining strip around the resulting pentagon. For each face - at least 2 layers. All that remains is to squeeze their middles towards the center, and the first star is ready.

For the next eight-pointed star we will need 8 squares of four different sizes. Fold each of them as in the picture. Then glue squares of the same size together to make 4 eight-pointed stars. Now connect them together. These are the stars we got.