How to make a snowman from a T-shirt. DIY snowman for the New Year - many ideas and crafts master classes
DIY New Year's snowmen can be made from the most different materials: glass light bulbs and plastic bottles, napkins or corrugated paper, terry sock or wool threads. Children preschool age can perform such crafts using the appliqué technique, and adults can master new techniques such as decoupage, modeling polymer clay, knitting or sewing.
To do this, you can use it as additional training material, where all the intricacies of performing each job are described in detail. For example, if you decide to sew felt toy, then there you will find tips on what order to sew the parts and how to fill them to make the toy three-dimensional.
If you like modeling with polymer clay, and you have already decorated with this technique, you can take it as new ideas and create stylish christmas decoration, for example, a pendant or earrings “Snowman”.
DIY New Year's snowmen: master class
They turn out very beautiful DIY Christmas snowmen, master class will show you how to complete this fun craft step by step. As a rule, it is on New Year's Eve that everyone is busy with creativity, someone decorates the Christmas tree, someone decorates the house or the lawn in front of the house, someone creates cards with their own hands, where congratulations will be written for relatives, and someone prefers to make souvenirs -presents. As a matter of fact, if you decide to make a snowman, then they can be used both for decoration and as a gift.
If you're interested, how to make Christmas snowmen with your own hands, then, first of all, you need to pay attention to the technique of sewing toys using felt. If you have decided to try this type of needlework for the first time, then do not worry, since this material is very convenient, easy to cut, does not fray, so you do not need to additionally process the edges. After all, remember how difficult it was to work with satin ribbons when we did may be useful to you too. And if you fill the sewn parts with down, you will get a beautiful three-dimensional figure.
Among the materials that we will need, felt comes first - white, burgundy, black, blue, green, red, orange. Holofiber will serve as a filler; you also need to take six beads for decoration, felt-colored threads, glitter, and Dragon glue.
Before cutting out the parts, you need to trace them on felt, and first you need to prepare a sketch or pattern of all the elements. It can be printed, or transferred from the monitor to paper (just place an A4 sheet in the monitor and trace the elements with a pencil).
Now you need to cut out the elements on paper. Let's take it white felt, fold it in half (because this material does not have a wrong side). We will use it to complete the base of the snowman. We attach two circles of paper (which we cut out) on top; this can be done using pins. You can cut out as many bases as you want to end up with snowmen.
Next, you can sew the circles together using threads of a contrasting color, for example, green. Hand stitches look very beautiful on this material, but they must be neat. The circle does not need to be sewn up to the end right away; first it must be filled with holofiber, and only then sewed up. On top of this already formed circle, you need to put both sides of the upper, second part, combining them. Also secure with pins and sew with hand stitches. At the junction, you also need to sew first on one side, fill it with holofiber and sew up the second side.
The base is ready, it's time to decorate it. The snowman should have a beautiful black cap. Cut it according to the pattern using black felt. You can trace the details along the contour with chalk or a piece of dry soap. There should still be two parts for each element of the craft.
Now we attach the cap to the head, it must be “put on” over the head and secured with pins. Cut a strip from the burgundy color that will be attached to the front side. It must be glued with Crystal or Moment.
We make the eyes using black beads; they need to be sewn or glued. Orange material will be needed to cut out and then sew the nose, and attach the finished nose to the face (glue it). You need to embroider the mouth of the toy using hand stitches so that it looks just like natural.
You also need to embroider a snowflake on the bottom circle using hand stitches. You need to cut a Christmas tree out of green. Sew hand stitches down the center, sewing it to the base.
Cut a couple of stripes from blue. Glue one on the neck, so you decorate the snowman with a scarf, and form the other strip into a bow and secure it in the center.
We got these beautiful ones DIY Christmas crafts: snowman must be original, so decorate each next one with other elements.
If you like sewing from felt, then be sure to try it, they will tell you what color material to buy.
DIY Christmas crafts: snowman
DIY Christmas snowmen from bottles Decoupage techniques require special skills, so children do not always cope with this type of creativity on their own. But we offer you the simplest option - crafts from threads; here you only need to know how to make pom-poms. Naturally, we need yarn white, and you will also need some blue yarn for decoration.
To make a pompom, you need a template that is an open ring. For each pompom you need to take two identical ones. It is better to do it from thick paper (cardboard, for example). The diameter of your template will determine the size of the pompom.
Now we need to remember how we sculpt a snowman, because for this we always use three snowballs of different sizes, the same must be done here, but the snowball will be pom-poms. Small will have a diameter of 4.5 cm, medium - 6 cm, large - 8 cm.
Two identical templates must be folded, wrapped with yarn, it must be wound tightly. Now cut a small piece of thread. Squeeze the workpiece tightly in your hand and cut the threads from the outside between the two template parts. Thread the prepared piece of yarn through and tie it. Now the finished pompom needs to be trimmed, cutting off all excess. Make three fluffy lumps and you can form a snowman, for this you need to use hot glue.
The eyes should be made of black beads, the nose should be made of orange felt, filled with holofiber. We will decorate our toy with a cylinder, which we will also cut out of blue material. The mittens are made of red, and the hands must be made of thick wire, wrapped with black yarn. At the end, decorate it with a blue knitted scarf.
DIY paper Christmas snowmen
DIY paper Christmas snowmen- this is an activity for the little ones who find it difficult to make crafts using sewing or pom-poms; for preschoolers you can offer very beautiful appliqués. A snowman can be made from napkins; although the activity is simple, it is very exciting and useful; thanks to such creativity, the child develops thinking, imagination, and fine motor skills.
In addition to napkins, you will also need scissors, a stapler, glue, cardboard for the base (preferably blue). First you need to take ordinary white napkins (three pieces) and fold them together. Fasten them in the center with a stapler. Cut out a circle with scissors, which must first be drawn with a pencil.
Next, carefully lift each layer, holding it in the center. Do the same with the next batch of napkins, only this time the circle should be of a smaller diameter. Now take one napkin and fold it: in half and in half again. Cut out the smallest circle. Now you need to glue the three parts onto the cardboard base and decorate the snowman from napkins.
Cut out a hat from colored paper, make eyes from black plasticine, and a carrot nose from orange.
DIY New Year's snowmen made from socks
It's always interesting to give a second life to old and unnecessary things, for example, it often happens that one sock is lost and the second one can be thrown away, but we suggest you creative idea how they are performed DIY New Year's snowmen made from socks, you will also need an old small children's hat, a circle of thick cardboard, cereal, and white thread. Scissors, a needle, two small buttons for the eyes, a piece of red foam rubber.
You need to put a circle of cardboard into a white sock to make the craft stable. Then pour cereal into the sock (you can take rice or buckwheat). Tie the top with white thread. Then use a thread and a needle to outline the neck, tighten it, and give it shape. In the same way, you need to make the handles.
Cut off the top of the hat and bend its edges to make a hat for a snowman. Another piece needs to be cut off for a scarf.
Now you can sew on the button eyes. If there are buttons in the shape of hearts, then you can decorate the body with them.
DIY Christmas snowmen from bottles
A bottle of liquid caramel has the right shape to make a neat snowman out of it. You also need to take white plasticine, white, gray and yellow threads (for knitting), two toothpicks, beads for the nose, black plasticine for the eyes, superglue for joining parts.
The bottle should be coated with a thin layer of plasticine. Make a hole in the middle for your hand and insert a toothpick. Next, the entire bottle must be wrapped in white yarn, pressing it against the plasticine. Fasten and trim the ends.
As a bucket, which traditionally serves as his headdress, you need to take a jar of yogurt. It must be cut to the desired height and glued on top with superglue. Next you need to glue the nose, eyes and buttons.
You can find several more ideas for creating New Year's toys using various techniques and techniques. For example, you can make balls from threads: dip the threads in glue and wrap them around an inflated balloon; when they dry, the balloon bursts, and transform the resulting ball and two more of different sizes into a snowman figurine.
We don’t know for sure whether tomorrow there will be enough snow on the park alleys to make a beautiful snowman with the kids. But we know exactly how to make it at home from scrap materials: socks, plastic cups, bottles, fabric, paper, threads, cotton pads and balls. Our step-by-step master classes with photos and videos will help you quickly and easily make a three-dimensional 3D craft for New Year's decor or flat applique on the Christmas tree in kindergarten. We invite you to familiarize yourself with step by step instructions and choose which DIY snowman you like the most.
DIY paper applique “Snowman”
During New Year's holidays I really want to surround myself and my loved ones with something incredibly fabulous and winter-wonderful. In almost every house they cover the windows with snowflakes, decorate the beautiful Christmas tree, and decorate the rooms with garlands and tinsel. Such a classic has long become familiar. But how can you surprise your household? We suggest you make an original “Snowman” applique out of paper with your own hands, and then use it to decorate a large mirror, door glass, bookshelves, etc.
Necessary materials for a DIY paper snowman
- colored cardboard
- thick white paper
- scissors
- pencil
- compass
- figured hole punch (or snowflake die-cutting)
- black marker
- colored paper
- blue ink
- thin satin ribbon
Step-by-step instructions for making a children's applique "Snowman" with your own hands for the New Year
Do-it-yourself snowman made from cotton pads: master class with step-by-step photos
Even the next snowman will be made from cotton pads with his own hands. small child based on photos from our step-by-step master class. Making such a simple craft does not require special skills or special tools. Only simple materials at hand and quick instructions for children.
Necessary materials for a funny snowman for the Christmas tree with your own hands from cotton pads
- cotton pads (white thick felt is fine) - 15 pcs.
- orange felt
- jute cord -0.5 m
- satin ribbon white 3 mm - 1 m
- satin ribbon colored 6 mm - 0.5 m
- acrylic paints
- pencil
- scissors
- needle and thread
- glue gun
Step-by-step master class on snowmen made from cotton pads for a Christmas tree
How to make a snowman from plastic bottles: step-by-step video instructions
Unfortunately, not all regions of our country are destined to enjoy snow, even in icy weather. winter period. But I really want to please the kids with the presence of a funny, cheerful and friendly snow character. Well, what can you do, you’ll have to create a snowman with your own hands from plastic bottles using step-by-step video instructions. Of course, such a character is out of season, but it’s still better with him than without him at all.
Watch how to make a snowman from plastic bottles in step-by-step video instructions:
How to make a snowman out of cotton wool with your own hands for kindergarten
Sometimes even the most unpredictable things can become excellent material for creating a small New Year's miracle. Using the example of the following master class, you can easily see this. How to make a snowman out of cotton wool with your own hands for kindergarten, read on.
Necessary materials for a cotton wool snowman in kindergarten
- shoe box
- thick cardboard
- colored paper
- gouache paints and brushes
- PVA glue
- flexible wire
- beads
- paints
- pencil
- scissors
- glue gun
Step-by-step instructions for making bright cotton wool crafts “Snowmen” for kindergarten
DIY “Snowman” craft from scrap materials for the New Year
We offer you another unusual way of making a completely classic and completely charming snowman from the most common material in everyday life - toilet paper. Some people lack snow, others lack the feeling of a holiday. And some people are simply in a hurry to engage in exciting creativity with their own children. To do this, you don’t need to know how to draw, sew, or knit. Everything is very quick and simple if you have at hand our master class on creating a “Snowman” craft from scrap materials with your own hands on New Year.
Necessary materials for a snowman for the New Year 2018 from scrap materials with your own hands
- toilet paper
- PVA glue
- gouache paints and brushes
- colored felt
- thick cardboard
- scissors
- ruler
- glue gun
Step-by-step master class on making a New Year's snowman from scrap materials
DIY Christmas snowman made of threads: master class and step-by-step instructions
With a lot of desire and enough perseverance to master the technique, you can make another extraordinary snowman - the favorite of all children. To create it you will need something that is available all year round in every home. It's about O simple threads(floss, yarn, etc.). It turns out that even they are capable of turning into an amazing figure and cheering everyone up on the eve of the magical winter holidays. In the next master class with step-by-step instructions, we will tell you more about how to make a New Year's snowman from threads with your own hands.
Necessary materials for a New Year's snowman made of threads in a DIY master class
- balloons
- white yarn
- PVA glue
- bright knitted fabric
- artificial eyes for crafts and dolls
- scissors
- colored paper
- thin wood twigs
Master class with step-by-step instructions on how to make a snowman from threads with your own hands for the New Year 2018
How to make a snowman with your own hands from threads and balls at home: quick video tutorial
If the previous master class was not very clear and detailed for you, check out a quick video tutorial on how to make a snowman from threads and balls with your own hands at home. In this great video you will find good recommendations and quality advice that will facilitate and speed up your creative process.
How to make a snowman with your own hands from threads and balls at home - quick video tutorial:
How to sew a snowman from socks or fabric with your own hands
If your white socks are out of fashion or you just lost one of a pair, don't worry. Use this material to make a fun winter toy for your child. See how to sew a snowman from socks or fabric with your own hands, and feel free to get to work.
Necessary materials for a DIY snowman made of fabric or socks
- white sock
- raw rice
- rubber bands
- buttons and beads
- cotton fabric
- scissors
Step-by-step instructions on how to sew a snowman from fabric or a sock with your own hands
How to make a snowman from plastic cups and other scrap materials
In fact, a snowman is the same symbol of the New Year holidays as the Christmas tree, tangerines and serpentine. White smiling friend - the very embodiment snowy winter and happy holidays. Therefore, if the snowfall has not yet come, and there is practically nothing available from scrap materials, make a snowman at least from plastic cups. Many people believe that this version of a themed craft is one of the most successful and original.
Necessary materials for a snowman made from plastic glasses and other materials with your own hands
- white plastic glasses
- stapler
- Santa Claus hat and scarf
- pieces of fabric of different colors
- orange paper
- New Year's garland
Step-by-step master class on how to make a large snowman with your own hands from glasses and other materials
How to make a snowman from disposable cups: step-by-step video instructions
New Year's crafts help you plunge even deeper into the charming festive atmosphere and erase the invisible border between reality and magic. This is a great opportunity for both adults and children to show their creativity and experience a lot of memorable moments. Original craft- a snowman made from disposable cups according to video instructions - will decorate your home, school classroom and even work office. The main thing is to gather your thoughts and start!
Watch how to make a snowman from disposable cups in the step-by-step video instructions:
A DIY snowman made from scrap materials is a simple, but very effective and atmospheric craft. Make it from a sock or fabric, paper or thread, plastic cups or bottles, cotton pads or balls at home. Any version of New Year's crafts according to our step by step master class with photos and videos will become a worthy decoration for your interior or a wonderful creation for a kindergarten exhibition.
The most spectacular New Year's attributes have large size. AND website wants to show how to make a big snowman from various improvised materials or even waste materials, which can live in a house or yard and become its decoration.
DIY snowman made from plastic cups step by step
Plastic cups are one of the most affordable materials for crafts, from which you will make a wonderful big snowman with your own hands. You can put an electric LED garland inside such a snowman and the funny snowman will be illuminated in the evenings and show the way home. Or maybe he will become a magical friend for your child? In any case, it’s worth learning how to make a snowman from plastic cups with your own hands step by step.
Required materials:
- plastic white glasses 3 packs of 100 pieces;
- stapler;
- glue;
- decorative materials for creation and Christmas tree garland.
How to do it step by step:
- To make such a snowman you need to create two larger balls from white plastic glasses. We start “rolling” the balls from the bottom row - lay out 25 white cups in a circle and fasten the cups to each other using a stapler.
- We place the second row between the cups of the first row. The cups should go slightly inside the ball to form a hemisphere. An ideal ball is unstable, so you need to strive for a hemisphere. For the second row you will also need 25 plastic cups.
- We lay the following rows. For the bottom ball you need to lay 7 rows of glasses. With each row, fewer and fewer cups will be required, since they are cone-shaped and your craft will take the shape of a ball. The workpiece should remain open; we will install the next ball on it.
- To make a snowman's head from plastic glasses you will need 18 pieces. Smaller head. We also lay them out in a circle until the finished head is obtained. If it was not possible to finish the ball on top, then you can put a hat or cap on its head and thus cover the hole.
- Place the small ball on the large one, check how stable this craft is and fasten it together.
- Decorate the head - create eyes from fabric or plasticine, nose - a cone from colored paper orange color, hang tinsel around your neck, and place a Christmas tree garland inside for illumination.
- If a snowman made from plastic cups is made from 3 balls, it will turn out to be very unstable.
A detailed explanation of how to make a funny snowman from plastic glasses with your own hands if you want to please your children and guests with something unusual. It takes little financial cost and time to create it, but the arrival of a magical New Year's mood guaranteed!
DIY snowman made of threads step by step.
You can also make a fairly large snowman from threads; the advantage of this craft is that it can be made classic - from three balls. It is lighter, more elegant, can be hung from the ceiling and will not take up space.
You will need:
- 3 balloons;
- 1 skein of white b/w thread;
- PVA glue, glue gun;
- scissors;
- a little felt;
- sticks and twigs;
- colored buttons and beads.
How to make a snowman from threads step by step:
- We make 3 balls of different diameters from threads and glue. To do this, we inflate a ball of the same size as we want to make a ball of thread for a snowman.
- Next, you need to wrap the ball with thread dipped in glue. This can be done in two ways. First, lay the thread on paper and coat it with glue. The second method is more convenient - you need to thread a needle and pierce a tube of PVA glue with this thread. The thread passing through a jar of glue will itself be wetted in the glue.
- We wrap the ball with glue thread through the center, creating a pattern. If it seems to you that the ball is not completely saturated with glue, then you can additionally coat it with glue on top.
- Let's make two more smaller balls in this way.
- Do we leave the balls to dry for 10 - 12 hours? then we puncture the balloon and remove it.
- After drying, glue the balls to each other with a glue gun. To make them stick to each other better, you need to make a small indentation near one of the glued balls.
- We will make the snowman's arms from twigs and glue them to the body using a glue gun.
- You can also make a broom from branches.
- To create a snowman's face from threads, you can use buttons or beads, which are glued with a glue gun. The nose and mouth are made of felt, colored paper or plasticine. Let's draw the cheeks.
- Let's cut a strip of fabric from felt and make a scarf for the snowman.
- A hat can be made from a small bucket or a felt cap.
- It turns out to be such a cute snowman made from threads with your own hands for decorating a Christmas tree.
Master class on creating a New Year's snowman from threads with your own hands:
How to make a snowman with your own hands from scrap materials.
There are materials at hand that are literally created to make snowmen out of them, these are:
- cotton wool and cotton pads,
- skeins of white thread,
- socks,
- paper and paper plates,
- felt.
Making a snowman out of cotton pads couldn't be easier! This is a wonderful craft for kindergarten-aged children. 2 cotton pads are glued to each other on thick cardboard and then decorated. You can make very cute New Year cards from such decorative elements.
How to make a snowman from a sock with your own hands. Master class.
A DIY sock snowman is also not complicated and quick to make. For this you will need:
- 2 white thick socks;
- semolina for filling;
- rope, thread and scissors;
- buttons, beads, felt or fabric for decoration.
How to do it New Year's snowman with your own hands:
- Pour half of the semolina into the sock.
- We tie it tightly with thread.
- Pour semolina into the second part of the sock, without filling it all the way, so that the snowman can be easily tied.
- We sew or glue buttons - eyes, tie a scarf. From the second sock we make a hat and New Year's craft ready!
How to make a paper snowman
The easiest thing is to make a paper applique in the shape of a snowman in the form of a poster to decorate your home or entrance. Glue 3 circles of different diameters onto a large colored sheet of whatman paper and color them.
A more interesting snowman is made from paper plates. To do this, you need to glue cotton wool along the rim on top of the plate, this will be hair, glue a cap and a nose - a carrot, and draw a face.
Most interesting crafts waste materials are used to make toilet roll snowmen.
- They need to be covered with white paper.
- Make circles out of shiny paper using a hole punch and glue them in place of the mouth and eyes.
- Make hands and headphones from wire for children's creativity.
- Tie scarves for them and place these snowmen on the balcony.
New Year 2020 of the White Metal Rat is approaching, and each of us is preparing for it wonderful holiday. Some people plan to celebrate the holiday at home, with their family, while others, on the contrary, in a noisy company of friends, on the street. In both cases, I would like to beautifully decorate the New Year's meeting place. Typically, the New Year's decoration of the home consists of a Christmas tree, all kinds of garlands and beautiful festive compositions from Christmas tree branches and tinsel. On the street, traditionally, a snowman is made from snow and decorated with various fun accessories. But what if you want to have such a funny snowman in your apartment, or it happens that there is little or no snow outside? For such cases, we offer some great ideas on how to make a snowman for the New Year 2020 with your own hands from scrap materials.
Snowman made from plastic cups
In order to make such a rather unusual snowman, you don’t have to work hard, because creating such a miracle is as easy as shelling pears!
To make it you will need:
- plastic cups - 300 pcs.;
- PVA glue or stapler;
- plasticine.
Work progress:
- 30 glasses should be laid out in a circle and fastened together using a stapler or glue. The first row is ready. According to the same principle, we make the second and all subsequent rows. For each subsequent row, fewer and fewer glasses will be required, since they are cone-shaped. Thus, the first lump should be obtained.
- The next lump should have a more round shape and smaller dimensions. We take 22 plastic cups and form the second lump in the same way as the first. After that, we turn it over and lay out the missing rows. If desired, you can make a third lump, however, in this case, it may be too unstable.
- Connect both lumps and make sure that everything turns out correctly and evenly.
- Let's start decorating. Make eyes from black plasticine and a nose from orange plasticine. Wear a hat or cap. You can also use a scarf, ribbons, fabric and other elements for decoration.
- You can put it under a snowman New Year's garland, in this case it will also glow. The main thing: show your imagination! This decoration can be installed indoors or outdoors.
Master class on making a snowman from plastic cups
Snowman made of threads
One of the most simple options How to make a snowman for New Year 2020 with your own hands, using ordinary threads. It looks original and is done, surprisingly, quickly and easily.
- A skein of white thread,
- PVA glue,
- Balloons - 5 pcs.,
- cotton wool,
- Needle.
Work progress:
- First of all, you need to inflate the balloons, they will be the body. 3 – different sizes and 2 – the same (for hands).
- Using a needle and thread, pierce the jar of PVA glue. The thread must be saturated with glue. We remove the needle and wrap the thread around the inflated balls, which have been previously coated with a small amount of vegetable oil (so that the thread does not stick to the ball). Try to wrap the balls as carefully as possible so that there are no gaps at all. Once all the balloons are wrapped, place them in a warm place to dry completely (at least 24 hours).
- After this, pierce each ball with a needle and remove its remains by the tail.
- We sew all the parts together with white thread. For maximum effect, you can coat the stitching areas with glue. Leave it until completely dry.
- The eyes can be made from buttons or beads, the nose and mouth from colored paper. Wear a hat and scarf. Our snowman is ready for the New Year!
Master class on making a snowman from threads
Snowman made from beer caps
A snowman made from beer caps does not require great creative skills to make. Even a child can easily make such a New Year’s craft with his own hands. And since a snowman from ancient times is considered a good helper in the fulfillment of cherished desires, such a craft will not only serve as a decorative element, but will also attract good luck and luck to your home.
To make it you will need:
- Bottle caps;
- Acrylic paints - white, black, orange, red;
- Brushes;
- Ribbon;
- Hot glue;
- Buttons;
- Scissors;
- Glitter (at your discretion).
Work progress:
- Take three bottle caps and paint them white, then glue them together with hot glue.
- Glue a red ribbon to the back of the future snowman, making a loop at the top.
- Using a thin brush, draw the eyes, nose, mouth and buttons on the snowman.
- We tie a thin ribbon, which will serve as a scarf, between the first and second lids. To make it more beautiful, you should glue a button or other decorative element that you like.
Our cheerful snowman is ready for the New Year!
New Year's craft "Chocolate - snowman"
New Year's holidays in every family, of course, are not complete without sweets. But, given the fact that the New Year is a time of magic and the fulfillment of all cherished desires, you should definitely transform an ordinary chocolate bar into a rather cute snowman, thereby intriguing your children beautiful packaging made with your own hands.
You will need:
- white or blue paper;
- Scissors,
- Black felt-tip pen,
- PVA glue,
- Orange corrugated paper;
- Scarf and hat (can be made from a sock or corrugated paper);
- Fir branch with beads or other decorative elements.
Work progress:
- We take a clean sheet of paper and wrap a chocolate bar in it, and so that it does not unfold, we glue it with PVA glue.
- On the finished snow-white tile, draw the eyes of the snowman with a black felt-tip pen, and form a nose from a small rectangular piece of orange corrugated paper, tightly wrapping it into a cone and gluing it with glue.
- We draw a smile with a black or red felt-tip pen, and create a blush on the cheeks using a red pencil, which we use to shade on a small piece of white paper, and then lightly rub it on the cheeks.
- We make a hat and a scarf from a sock: cut it in half and sew one part, where the heel remains, using a needle and thread. Using a thread from the top of the hat, we create a bubo. To make the hat seem mischievous, sit slightly at an angle and tighten one side of it with thread.
- We cut the scarf in a semicircle from the second half of the remaining sock and tie it around the snowman’s neck. To prevent the ends of the scarf from sticking out in different directions, we secure them to the tile itself with double-sided tape. We decorate the scarf with fir branches and beads or anything of your choice. Ready!
Master class on making a chocolate snowman
Candy snowman
You can make a snowman quite creatively for the New Year 2020 using candies; it will fit perfectly on your holiday table or near the Christmas tree.
To make it you will need:
- Candies "Raffaello";
- Foam balls (one small, the other a little larger) - 2 pcs;
- White paper;
- Hot glue;
- Toothpicks - 3 - 4 pcs.;
- Scissors;
- Foil;
- Chenille wire (fluffy, flexible);
- Silver cardboard;
- Rain.
Work progress:
- Take two foam balls and cover them with white paper.
- We connect the finished glued balls together, place them on top of each other (small ball on a large one), place them on toothpicks, and secure them with hot glue.
- We make mittens: cut out mittens from foil and insert a small candy into them and seal it inside with hot glue.
- By using chenille wire we wrap both mittens around the edges, making them fluffy, and twist it at the base of the mitten.
- We paste the resulting snowman with candies: we paste the bottom ball in three rows, at a short distance, and on the top - three candies.
- We wrap the entire snowman in rain, securing it with hot glue. We put a cap made of silver cardboard on the head and also attach it to glue.
- We glue eyes taken from an old soft toy onto the face, a nose from gold foil, a mouth from red rain or other material.
- We glue on the mittens, and then the legs, made using silver cardboard in oval shape. Well, that's it!
Snowman made of cotton wool
Such a craft will certainly interest the guests of your home, and probably none of them will immediately guess what this piece is made of. beautiful snowman done.
We will need:
- Deodorant bottle
- PVA glue,
- cotton wool,
- Buttons,
- Beads,
- Ribbon,
- Crepe paper.
Work progress
- Carefully cover the bottle with cotton wool using PVA glue and place it in a warm place to dry. Attach the scarf (ribbon) with glue.
- Sew several small buttons onto the body. Make eyes from beads, and a mouth, eyebrows and nose from crepe paper. It will turn out very fluffy and soft.
Master class on making a snowman from cotton wool
Snowman made of balls
This is probably the simplest New Year's craft that even a schoolchild can make with his own hands.
For production you will need:
- multi-colored markers or felt-tip pens.
- modeling ball – 1 pc.,
- white balloons – 2 pcs.
Work progress:
- We inflate white balloons of different sizes and tie them together using threads or ponytails.
- We inflate the modeling balloon and secure it in the form of a scarf where the white balloons are tied. Use a black marker to draw eyes, orange for a nose, and red for a mouth.
Master class on making a snowman from balls
Snowman made from a sock
To make such a snowman for the New Year you will need very little time and effort.
Materials:
- White socks
- Two buttons
- Scissors,
- Rubber.
Work progress:
- Cut the elastic from the sock.
- Secure it on the wrong side with an elastic band and turn it inside out.
- Now fill the sock with rice and cotton wool.
- Give the shape of the snowman using an elastic band: secure it in the middle.
- Make eyes out of buttons, put on a hat and scarf. It will make a great souvenir or Christmas tree decoration.
Master class on making a snowman from a sock
Fabric snowman
From fabric you can make with your own hands not just a unique snowman, but also an excellent soft toy for your child.
We will need:
- White fabric,
- Threads,
- Needle,
- Buttons,
- Sintepon,
- Ribbon,
- Beads,
- Cardboard.
Work progress:
- Sew a small bag from white fabric, then fill it with padding polyester.
- Using thread, tie it tightly in two places to form the head and body. Sew a ribbon and secure beads at the ends.
- Make a nose out of red cardboard and eyes out of buttons. You can tie a scarf made of plaid fabric around your neck.
Master class on making a snowman from fabric
Light bulb snowman
Did you know that from old light bulb you can make something original Christmas tree decoration? It's very easy and simple!
Making a snowman yourself is very easy without spending a lot of money.
To do this you will need the following materials:
- Threads;
- pearl barley or rice;
- beads, rhinestones, buttons, ribbon.
Take the sock and cut off the nose part. We put it aside.
Take a large part of the sock (with the heel) and tie one side with thread. You need to tie it tightly so that there is no hole left.
Pour cereal into a sock. It is better to take pearl barley or rice, because they are light and will not show through a white sock. We fall asleep almost to the very end, leaving a little fabric so that you can tie it with thread.
We tie a sock. The result is a white ball or oval.
We put the sock on one of the sides with a tied bun (preferably the one that turned out to be thicker). We begin to wrap the filled sock with thread just above the middle. The bottom part should be larger than the top.
Let's start decorating. We tie a ribbon between the balls, which are separated by threads. The ribbon is the snowman's scarf.
We take rhinestones or beads and glue them like eyes, a nose and a mouth. It is better to glue it with adhesive moment.
Liquid glue will not work; it gets absorbed into the sock and the beads fall off.
We take the cut off nose part of the sock and make a bend. We put it on the snowman's head. It turns out to be a hat.
Two beautiful snowmen come out of a pair of socks. They turn out very cute and lift your spirits. They will be a wonderful decoration for the holiday.
Other options for a DIY snowman made from socks
How to make a very beautiful snowman from stockings
With the help of your skillful hands, another snowman will settle in your house.
Materials and tools:
- Two foam balls of the same size;
- thin red felt;
- green fuzzy wire;
- foam material, such as polystyrene foam for the stand;
- orange polymer clay (plasticine is also possible);
- red threads;
- scissors;
- glue gun;
- acrylic paints or gouache - red and black;
- brush;
- stationery knife.
We take two prepared balls and cut off small segments from them.
We divide one of the cut segments into 4 parts with a knife. We leave the middle ones, from which we will make handles.
From packaging material, polystyrene foam or polystyrene foam, we cut out a circle with a slightly larger diameter than our balls.
Carefully cut a small depression in the middle.
Lubricate with glue and install the first ball with the cut side up.
On the first ball, smearing it with glue, place the second one - cut side down.
Then cut out a rectangle from felt. The larger side of this rectangle should be equal to the circumference of our ball, and the smaller side should be equal to its diameter - this will be the cap. A long strip of felt is a scarf. Mittens - 4 parts.
We glue mittens to the handles.
We grease the felt for the hat with glue and apply it to the head.
We attach the handles.
Lubricate the scarf with glue and wrap it around the neck area.
We make a carrot out of plastic or plasticine and place it in place of the nose.
Use a red thread to tighten the cap, cut the ends of the scarf and the top of the cap.
We twist a Christmas tree from green fleecy wire.
We draw the snowman's eyes, mouth, blush on the cheeks, and buttons. We give a Christmas tree in your hand.
Our craft is ready!
DIY napkin stand with snowman
New Year festive table never goes without a hot dish. In order not to spoil a beautiful tablecloth, housewives often use special stands. But they can be made so that they appearance harmonized with the holiday atmosphere. For example, knit them in the form of a snowman.
For knitting a stand in the form Christmas decorations we will need any medium-thick yarn of any dark color (otherwise the applique will blend in with the background color), hook No. 1, white denim yarn, pieces of adhesive-based felt, a decorative bow, two beads, scissors.
We collect 4 air loops from dark yarn and close them into a ring with a connecting loop.
We knit the first row with single crochet stitches, inserting the tool into the hole of the ring. The number of stitches does not matter, the main thing is that the knitting does not bend. We also close the row with a connecting loop.
We also knit the next rows with single crochets. To prevent the knitting from curling at the edges, it is necessary to periodically make additions. We make additions in each row, but their number will vary depending on the numbering of the row. For example, in the second row we make 3-4 additions, in the third – 4-5 and so on. The number of increases may vary depending on the yarn, so the main thing is to ensure that the knitting does not curl and the increases are at an equal distance from each other.
The total number of rows for the base is 5-6. You can make more if you want the diameter of the stand to be larger.
IN next row Use a thread or a yellow marker to mark 4 points that are equidistant from each other. In this row we also knit single crochets, but at the points marked for us we knit three single crochets in one loop.
We knit the third row in the same way as the second.
After this we will tie the edge of the stand. To do this, we attach white yarn to the edge of the circle and knit the following pattern: 3 chain loops for lifting, 1 double crochet in the same loop, 3 chain loops, “picot” from these three chain loops, 2 double crochets in the same loop.
We repeat the pattern to the end of the row, only instead of 3 chain loops we knit a double crochet.
After this, we knit single crochets in the same way as we did when knitting the warp.
Cut out a “bucket” and a “carrot” from pieces of felt with adhesive backing.
We form eyes from beads, sew all the details and glue them to the base so that we get a snowman.
The “Snowman” hot pot is ready. The author of the master class is Elena Sharygina.
In winter, in snowy weather, children enjoy rolling snowballs and then making large and small snowmen from them. It immediately becomes clear to everyone that the basis of such a craft should be balls of different sizes. If you transfer this object to paper, be sure to show the round parts. They can be easily drawn with a compass. But what to do if the child is still small, he does not know how to handle a compass at all, and this sharp object is dangerous for him.
Another thing is toilet paper tubes. The rolls make quite decent crafts. Naturally, the paper on top is gray, but it can be covered with a white sheet. And you can even not use a gray fragment, but immediately make a thin long cylinder from white cardboard.
Thus, to show a snowman figurine, it is not necessary to cut out 2-3 circles. You can make a white cylinder and add distinctive details - a long carrot nose, skis, a broom. All this develops the child’s imagination and makes it possible to use non-standard materials and techniques to perform unusual crafts.
What to prepare to make a paper snowman:
- white paper and a roll of toilet paper for the body;
- orange paper for the spout;
- yellow and blue paper for headphones;
- black paper for skis;
- branches and tape for a broom;
- scissors;
- glue;
- red and black pens or markers.
Make a white cylinder - the basis of the whole craft. This will be a complete blank for the entire torso of the snowman. Either stick a white sheet onto the gray surface of the roll, or use white cardstock. Cut a strip of cardboard, roll it into a cylinder, and secure it with glue or a stapler. This way, the central part will be single, smooth and even, and not consisting of separate circles.
Make an orange nose in the shape of a cone, it will look like a carrot. Take a circle and make a cut along the radius. Hold with your fingers, twist to get the desired part, glue the ends of the cone. Draw round eyes with pupils on a white roll with a black pen, and a wide mouth with a red pen. Now there is a face on the cylinder.
Lubricate the base of the cone generously with glue. Glue the nose to the face.
Cut out blanks from prepared paper: black skis, a blue stripe and 2 yellow circles for headphones. Gather several short branches into a bundle and wrap the base with tape. The result will be an imitation of a broom, which is usually inserted into the hands of snowmen who are sculpted from snow on the street.
Glue a blue stripe at the top of the cylinder on the sides. Mask the ends of the stripes with yellow circles on top. The headphones are ready.
Glue the broom to the side using tape or a piece of paper. The figurine seems to be holding her in his hands.
Now place the entire structure on the skis. To glue them, use additional pieces of paper or tape.
The little paper snowman is ready. He rushes through the snowdrifts and celebrates the New Year. You can also entrust him with a letter for Santa Claus, which he will definitely deliver to the recipient. In winter we see a snowman in the yard, and we will see another small copy on the shelf after repeating this lesson.
This children's craft in the form of a snowman is completed without much effort, so it is perfect for the youngest children. Everyone knows the sculpting technique, because creating snowmen and snowmen is a favorite activity for all children in winter. There are a lot of snowdrifts outside during the cold season, so you’re tempted to go out into the yard, go sledding, and play in the snow. And at home no one forbids you to engage in interesting creativity.
In this lesson we will not only create an interesting figurine, but also decorate it at our own discretion, because plasticine allows you to realize any fantasy. After reading this master class, you will not need to look for new ideas for winter creativity; you will definitely love this kind of work.
To create a plasticine snowman craft, prepare:
- white plasticine;
- black, orange, red, blue, brown plasticine, but in small quantities;
- match and toothpick.
Select a white block from the set. It is exactly what resembles real snow – just as pliable, easily deformed into clumps. But plasticine is not cold at all, it will never melt, it can even be moistened with water. Of course, you won’t be able to play snowballs, but you can do something unusual.
Cut off 2 pieces, leave a little for the limbs (no one forbids making arms and legs for our snowman). Roll 2 balls for the head and body. These two parts will be enough to form the figure.
Stretch your torso slightly. Prepare a match for connection. This small detail will not only hold it together, but also make the figure movable.
Connect the figurine's head and body. Using the head of a match, press the eyes onto the ball-head. Instead of the usual bucket that children can put on the snowman’s head in the yard, make other accessories. Let these be bright headphones.
Make a thin blue strip and glue it onto your head in a half-arc. Glue red cakes on the sides of the strip. These headphones are fashion trend winter. And they also suit a snowman very well.
Fill the eyes pressed out by the match head with black plasticine. Glue the nose. It can be either a carrot or a wide bright ball. Make a mouth and blush. The cheerful face of the charming snowman is ready, he smiles at us, and therefore we need to immediately move on to further stages.
Glue bright red buttons onto the front part of the body and press them down with the tip of a toothpick. After that, use a toothpick to create a broom. The snowman usually stands at a post in the yard, with a broom inserted into his branch hands.
Glue several brown threads to one end of the stick and press it around the circumference with your fingers. Make oblong arms and legs. It's better if they are small. The main part of the craft is the torso and head.
The snowman turned out to be mischievous and festive, bright and noticeable. Place the broom in his hands and sit him under the small tabletop Christmas tree. The New Year is rushing to visit us, with such a sentry we will not miss the most interesting things, we will definitely prepare for the holiday and have fun.
Nature tirelessly imagines in winter and sends us tens, hundreds, thousands of snowflakes from above. Scientists who have examined them under a microscope say they are all different. Of course, it’s hard for us to believe this, because snowflakes are so small, so delicate, they instantly melt from a light touch or breath.
And we, too, can experiment and create something unique; we don’t even need to look at snowflakes under a microscope for a long time and look for certain distinctive features. We have all kinds of creative materials at our disposal: plasticine, paper, threads, felt, beads and much more.
Start with what you understand, the easiest. Children love plasticine very much, and therefore they will gladly agree to make some kind of craft from it, especially if it is.
To create a snowflake like the one suggested here, prepare:
- plasticine;
- stack.
How to make an elegant snowflake
The proposed snowflake is creative, not similar to the white and traditional ones that have become traditional for us. blue crafts. Why not use brown, it is so similar to the chocolate that children love, which will definitely be in gifts on New Year's Eve, on the branches of the Christmas tree, on the festive table.
Is it possible to refuse the sweetest delicacy? Nevertheless, we can add additional white elements; moreover, we can also time the image on the snowflake for the New Year. For example, it will be a snowman - the middle of a snowflake and fluffy twigs - rays.
Make the body of a snowflake from a brown portion of plasticine. At first it will be a round cake, press it firmly onto a hard surface, smooth it out on top. Also show 6 rays using stacks. Press the cake around the circumference in 6 places. It is enough to make light cuts.
Make a very thin white cake, much smaller in size. Also go around the edge of the stack. Glue it in the center. Add another white cake and join it to the previous piece. This will be the head of the snowman, but first we prepared the body. The figurine consists of two parts.
Stick it on your head New Year's hat. It is not difficult to make if you have red and green plasticine on hand. Glue an imitation of a bright cap with a green trim on your head. Add bubo.
Now you need to somehow decorate your craft, make snowflake rays. Glue small pellets along the edge of the body cake, pierce each with a sharp stick. Glue a twig of white thin plasticine threads onto each ray. Make an imitation of spruce needles using a stack.
Glue spruce branches along each ray. The more magnificent the design, the better. Add a bright scarf to the snowman to prevent him from freezing at night, and decorate with buttons. Glue black eyes and a nose in the shape of a carrot. The figure looks elegant and winter-like.
An interesting plasticine snowflake is ready. Using the same scenario, it’s easy to make other crafts that are bright and stand out from the general background; you can depict not only snowmen on them, but also Santa Claus, the Snow Maiden, a Christmas tree, a deer and other holiday images.
DIY snowman “Skier”
How to make a snowman from felt
In this master class I propose to sew interesting toy made of felt for the New Year with your own hands.
For sewing New Year's toys we will need:
- soft felt (blue or blue, white, a little red for the nose);
- blue or blue floss threads;
- two buttons;
- filling for a snowman (sintepon, holofiber);
- beads or beads for eyes;
- lace.
Using a compass, we draw three circles with a diameter of 5 cm, 4 cm and 3 cm. Using these patterns, we cut out two circles, one of which has a small square at the top, in order to make it convenient to sew the circles to each other.
We take two large circles and sew them together, gradually filling them with filler.
We put two more circles on top, which are slightly smaller, and also sew them together, filling them with filler.
We do the same with the third circle.
Cut out a strip of blue felt for a scarf, 1 cm wide and the length of a snowman.
Place the scarf on the snowman and sew a button in the middle of the scarf.
Sew another button between the bottom circles.
You can make small cuts at the edge of the scarf with scissors.
Cut out a small triangle from red felt for the nose and sew it to the face.
Sew on small beads for the eyes.
For the handles, cut out small circles about 1 cm in diameter and sew them on.
Cut out two squares 1 cm by 1 cm for the boots.
We trim the edges of the squares so that we get triangles and sew them to the snowman.
At the top of the snowman we cut a hole with a ripper to thread the string through.
We thread the lace through the hole.
The snowman is ready, all that remains is to hang it on the Christmas tree or give it to someone as a souvenir.
How to knit the Snowman applique
Not a single New Year is complete without a snowman. And in this master class we will knit a flat applique in the form of this wizard! The product can be hung in your home or workplace to remind you of the upcoming holiday and instill a cheerful mood.
To knit such an applique we will need:
- Yarn in red, white, black and peach (beige) colors;
- Hook 1.75 mm;
- Scissors.
For applique, it is better to use thin yarn. “Children's Novelty” yarn is suitable. It is better to use a hook no larger than 2 mm.
Let's start knitting with peach-colored yarn, since we will first knit the face for Santa Claus.
We form a ring of 6 loops, but do not close it.
Make 1 lifting loop and unroll the knitting. Next we will knit 2 sc in each loop.
Then we make 1 lifting loop again and knit with an increase through 1 loop.
We turn around and make 3 lifting loops. Then we knit another 4 dc at the same point. In the next loop we make 1 sc. We skip 1 loop and perform 5 dc in the new one.
So we will continue knitting until the end.
The beard is tied, now let's start making the hat.
For this we need red yarn.
We join from above into a peach loop from one edge and knit along the peach loops. We simply do 1 sc.
Gradually the cap will narrow. In order for the edges to be even, we will make a sc stitch binding.
We will embroider the eyes with black thread, and we will embroider the nose with peach thread.
Now take the white thread again and make a few horizontal stitches under the nose. And make 1 vertical stitch in the center of the horizontal ones.
The hat is ready, but you can decorate it with a voluminous pompom.
To do this, we attach a thread to the very top central loop on the hat. We dial 10 VP. Next, join with a white thread to the last ch. We will now knit lush column from 5 yarn overs. But we do not knit the yarn overs all at once, but 2 loops at a time. At the end we knit 1 ss.
This is how we knitted a pompom for the hat. We tighten the thread and cut it. We hide all the tails between the loops on the left side of the applique.