How to make a tiger? Crafts made from paper and plasticine. Master class craft product New Year origami Chinese modular tiger paper Tiger made of paper DIY origami

The owner of the taiga.
Through the snowdrifts of the Amur region,
Hastily counting steps
Walking between the tall cedars,
The owner of the taiga walks important.

Plays with a paw with a spruce branch
There is a thunderstorm for the inhabitants of the forest.
Shine with a bright amber brilliance
Ussuri tiger eyes.

The December cold is becoming more and more fierce,
Winter stars are shining in the sky,
The evil taiga blizzard is circling,
The snow tiger warms the cubs.

So, we will need:
yellow modules - 272pcs
orange -997pcs
black-87pcs

We place the modules of the first row (I have them yellow) on the short side, the second - on the long side.
The first two rows - 6 modules each

In the third row, we double the number of modules; we put one module on each ray of the previous row. There are 12 modules in total (shown as modules of a different color)
P.S Next, I show all the additives in modules of a different color.

4th row - add 6 more modules evenly. In total - 18 modules. We add modules one at a time - we put one on, as always, on two adjacent rays, the next two modules on rays of one (shown by modules of a different color

Row 5 - add 3 more modules, 21 modules in total. I added this way - I put on 5 modules, then on the next module I put on two, one module on each ray.

(The places where modules are added are shown in a different color)

squeeze the workpiece to form a muzzle.
Row 6 - a total of 23 modules, that is, you need to add 2 modules: we put on 8 orange modules, then 15 yellow ones (in two places we put two on 1 module, one module on each ray.

Row 7 - 8 orange, 16 yellow (23 in total)
Row 8 - 8 orange, 17 yellow (25 in total)
Row 9 - 8 orange, 18 yellow (total 26
Row 10 - 8 orange, 19 yellow. (total 27)

As a result, we get this figure.

Now we will put yellow ones over the orange ones and vice versa - orange ones over the yellow ones.
Row 11 - 9 yellow with the short side out, 18 orange, also with the short side out.

Row 12: add 7 modules. In this row there are 10 yellow (short side out - SDS, 24 orange (long side out - SDS). There are 34 modules in total.
The addition is done in this way: immediately after the yellow ones we put two modules on the rays of one module of the previous row, then, as usual, two modules (put on two modules of the previous row), then again two modules on the rays of one module of the previous row, two modules in the usual way. (I hope I explained it clearly)
I tried to show this with modules of a different color).
Further, in all rows, up to the 23rd, there are 34 modules.

Row 13: 11 yellow KSN, 5 orange, 1 black, 11 orange, 1 black, 5 orange.
Row 14: 10 yellow, 5 orange, 1 black, 12 orange.
Row 15: 11 yellow, 4 orange, 1 black, 13 orange, 1 black, 4 orange.
12. Row 16: 10 yellow, 1 orange, 1 black, 20 orange, 1 black, 1 orange
This is what we should get:

Rows 17-19: 32 modules orange color, 2 black modules, all modules are put on with their length side out. In this case, the black modules of the previous rows are shifted posteriorly from the tiger cub’s forehead (WE GET TWO BLACK STRIPES ON THE SIDES)

Row 20 - all modules are orange.

21 row: at the back (or at the bottom, as you wish) - 9 modules are black, the rest are orange.
Rows 22 and 23 - all modules are orange

Row 24: reduce the number of modules to 23 modules. Modules of a different color show how to do this: put the module on the module of the previous row, skip the beam, put the module on two beams of adjacent modules, skip the beam again, put the module on the module of the previous row, etc. in total - 21 orange and 2 black. We shift the black ones in the same way as the previous stripes

Row 25: 23 orange modules.

Bring all modules together as close as possible so that the hole behind the head is as small as possible.

The head is ready, put it aside for now and start making...
EAR (2 pcs)
1 row - 7 modules, 2 row - 6 modules,

3 row - 5 modules, black in the middle, 4 row - 4 modules, 5 row - 3 modules, black at the edges, 6 row - 2 modules.

To attach the ears, insert a toothpick into the middle module, lightly grease the outer rays with glue and insert the ears into place.

Seal the hole at the back with a circle cut from thick paper (cardboard).

Design the face (mustache, eyes, forelock).
The head is ready

Torso.
We place the modules of the first two as shown below.
We assemble two rows of 30 orange modules. We immediately assemble the third row - 5 black modules, 25 orange.
in the fourth row we put on 4 yellow modules so that the black modules of the previous row remain with right side, 26 orange.
Row 5 - 5 yellow, 5 orange, 5 black, 15 orange. (MOVE CLOCKWISE - RIGHT TO LEFT)
Row 6 - 6 yellow, 24 orange.
Row 7 - 7 yellow, 23 orange
Row 8 - 8 yellow, 14 orange, 5 black, 3 orange.
Row 9 - 7 yellow, 7 orange, 5 black, 11 orange.
Row 10 - 8 yellow, 22 orange.
Row 11 - 7 yellow, 23 orange.
Row 12 - 6 yellow, 22 orange.
All modules should be brought together as much as possible.
The body is ready.

Upper paws
All modules (both the first and second row, orange) are placed on the short side. A total of 9 modules in a row.

We immediately assemble the third row - 1 black, 8 orange.

We turn the workpiece inside out so that the short side of the modules is on the outside.
This is the bottom view of the paw

Tiger: craft from modules

Origami is the art of folding all kinds of paper figures. We will try to make an origami tiger from modules with our own hands. So let's get started.

Module diagram

Take a sheet (for printing and copying) of A4 format, divide it into 8 parts and fold the module according to the diagram:

How to make an origami tiger

We will need modules:

• 997 pcs. (orange);
• 271 pcs. (yellow);
• 89 pcs. (black).

Scheme of origami tiger from modules

We make the craft according to the diagram in rows. The first and second consist of 6 yellow ones.

Third: double the quantity, you should get 12 yellow modules. In the fourth and fifth rows we add 4 modules each. Next, increase the row by one module and add color, you should get 8 orange + 13 yellow. Next 4 rows add 1 yellow piece. We form the face of our beast. We squeeze the craft so that it is strong. We insert the modules with the short side. In the eleventh row, we increase the number of components of each color by 1. Twelfth: 10 yellow + 20 primary color. Further rows will be more difficult to assemble, so it is important to avoid mistakes. Thirteenth: 10 yellow + 4 orange + 1 black + 11 orange. Fourteenth: add 1 orange element after 10 yellow ones. We carefully add modules. Fifteenth: 10 yellow + 3 orange + 1 black + 13 orange + 1 black + 4 orange. Sixteenth: 10 yellow + 1 orange + 1 black + 20 orange + 2 black. Next are three rows of 32 orange + 2 black. The twentieth, twenty-second and twenty-third are 34 orange. Twenty-one: 9 black + 25 orange modules.

We reduce the number of modules to 23. We finish the last row: 21 orange + 2 black. The head is ready for origami tiger. Next we prepare the paws.

Scheme for making tiger paws

First and second: 9 modules of primary color each.
Third, fourth and sixth rows of paws: replace 1 piece of the main color with a black module. Fifth: 1 black + 3 orange + 1 black + 4 orange. Seventh: 2 orange + 1 black + 2 orange. Eighth: 4 pieces of the main color. Do more 3 paws in the same way.

Let's get to the body

Based on the color of the tiger, we can assume that the main color will be orange, black for the stripes, and yellow for the belly. First and second: 30 modules of primary color each. Third: replace the first 5 parts with black ones. In the fourth row, we reduce the number of parts of one color and increase the other by 1. Fifth: 5 of each color + 16 main ones. Next row We begin to insert modules from right to left. Sixth: 6 yellow + 25 orange. In the seventh row, we increase the number of parts of one color and decrease the other by 1. We fasten all the modules together more tightly. Eighth: 8 yellow + 13 main + 5 black + 3 main. Ninth: 7 yellow + 10 main + 5 black + 11 main. Reducing the number of modules. Tenth: 8 yellow + 23 orange. Next 2 rows we reduce the number of parts of each color by 1. The body is ready! Origami tiger from modules is almost ready! Let's be patient!

So all we have to do is make the tail! First and second: 8 black each. Third and fourth: 8 orange each. Fifth and sixth: 8 black each. Seventh: 3 black + 4 orange. Next, we alternate 3 rows of colors, in the first we leave 7 parts, in the second - 5, in the last - 4. We connect all parts of the tiger’s body with the body. We make ears, eyes and antennae from colored paper, our craft is ready! Making an origami tiger from modules is not at all difficult, the main thing is to be patient, and everything will work out!

Origami tiger is one of the most popular paper origami. If you don't know how to make an origami tiger, then on this page you will find everything you need to assemble this simple paper figurine.

In the first photo you can see what you will get if you follow the assembly diagram below. The second photo of the origami tiger was taken by one of our site users. He made his paper tiger into a heart. It turned out to be a very funny paper animal. If you have photos of origami you have collected, send them to: This email address is being protected from spambots. You must have JavaScript enabled to view it.

Assembly diagram

Below is a diagram of the assembly of an origami tiger from the famous Japanese origami master Fumiaki Shingu. If you strictly follow the instructions, then assembling the origami tiger will not take much time, and the result will be the same as in the picture. After doing what is described in the diagram several times, you will understand how to make an origami tiger quickly and without looking at the diagram.

Video master class

Assembling an origami tiger may seem like a daunting task for beginners. Therefore, we advise you to enter the query “origami tiger video” on the largest video hosting site on the Internet, YouTube. There you will find a lot different videos about tiger origami, which clearly shows the steps to assemble a tiger. We hope that after watching the video of the assembly master class, you will have no more questions about how to make an origami tiger.

After watching this video lesson, you can learn how to assemble a more complex paper tiger:

And this video will teach you how to assemble several other origami tigers:

Symbolism

The symbolic meaning of an animal such as a tiger varies greatly depending on culture. For many, the tiger is a symbol of good power that can resist evil. In ancient China, for example, they believed that the tiger was a symbol of darkness, and all the power of this animal was aimed exclusively at destruction.

This time we will learn how to make paper modules. What we will get is not a formidable predator, but a quite cute animal that will decorate the interior of your home or become a wonderful gift.

A very small and funny tiger cub made from modules is available for assembly by beginners. The method of creation is somewhat similar to and. The most difficult task is to alternate colors correctly so that the tiger has a white chest and black flats on its back.

To work you will need:

• 175 red modules;
• 87 pieces of white shade;
• 60 black triangles;
• colored paper for ears, paws, eyes and nose;
• glue.

For modules, take rectangles measuring 4x6 cm. See how to do it.

First, it is better to collect the required number of parts, and then start assembling, so that nothing distracts and you can correctly repeat the drawing.

Origami tiger: assembly instructions

Start from the base. How to assemble it is described in detail. It will require 25 white modules (they will not be visible after assembly). Place 8 red parts on the long ends with pockets, then 7 white and 10 red ones. We got the first row. Glue it for strength. The white base modules went inside.

• 2nd row - 4 black, 1 red, 3 black, 8 white, 3 black, 1 red, 3 black, 2 red.
• 3rd row - 8 r., 7 b., 10 r.
• 4th row - 2 hours, 1 p., 5 hours, 6 b., 5 hours, 1 p., 4 hours.
• 5th row - 8 r., 7 b., 10 r.
• 6th row - 2 p., 2 p., 1 p., 1 p., 1 p., 2 p., 6 p., 2 p., 1 p., 1 p., 1 p., 2 p. , 1 p., 2 h.
• 7th row - 9 r., 5 b., 11 r.
• 8th row - 2 h., 3 r., 3 h., 8 r., 3 h., 3 r., 3 h.
• 9th row - 9 r., 5 b., 11 r.
• The 10th row consists of 5 p., 1 p., 1 p., 1 p., 1 p., 6 p., 1 p., 1 p., 1 p., 1 p., 4 p., 2 r.
• The 11th row includes 9 p., 5 p., 11 p.
• Row 12 is the final one. It consists of 25 red triangles.

Tiger in modular technology origami almost ready. He doesn't look much like a cute little animal until he has ears, paws, eyes and a nose. Make parts from colored paper and glue them to the body of a feline.

Please note that the ears can not be glued, but inserted into the holes of the modules of the top row. The same goes for the paws.

The use of glue is not a prerequisite for assembly. Of course, you will need to fix their eyes and better glue the base modules for strength. Otherwise, the figure is quite durable and suitable for children's games, if it is securely secured.

In this model, external design plays a big role, so spend the right amount of time on designing the face. You will definitely succeed. Ask questions about the assembly in the comments. Subscribe to new articles so you don't miss anything interesting.

Who among us in childhood did not at least once dream of having a real, tame tiger? Probably that's all... Of course, a real tiger is not a domestic cat. But for a child’s imagination to fly, you don’t need much... You just need our help and a little imagination. Paper tiger like others similar crafts, can be made in different ways. Thanks to the Internet, wide opportunities open up for us in this matter. You can, as you probably already guessed, simply download from some site on a similar topic ready-made template With step by step instructions, and glue according to the recommendations. You can make a tiger out of paper using the origami technique. There are plenty of options. We will look at some of them in our article, in a trial version, so that you can decide what kind of tiger you want to make. So let's begin..

Tiger 3D

This is perhaps one of the most simple ways make a tiger out of paper. This craft will delight your baby. It is carried out according to the principle of panoramic books. You open the page and the tiger rises. In this way you can make not only a tiger, but also a whole fairy tale with kind animals. The advantage of these toys is that the cost of their production is minimal, and you can always quickly make another one, if necessary. Your tiger can be either drawn by you or a picture cut out from any magazine and pasted onto thick white cardboard. To make a book cover for our tiger, we will need white glossy cardboard. From it we form two blank covers of the same size. We bend them in half. Our tiger will be attached to one, the inner part, with glue, according to the diagram shown below. The other part of the cardboard will go on the cover to hide the marks of the cut. That's all. The craft is ready.

Paper tiger using a ready-made template

To make a tiger using a ready-made template, we will need A4 paper, scissors, glue and a color printer. Download a ready-made template from the Internet, print it on a printer, cut it out and glue it together according to the step-by-step instructions.

Origami paper tiger

Origami tiger. There are a lot of different ways to form a tiger using the origami technique. Some of these figures only vaguely resemble a tiger, others are quite similar. There are even special themed sets of origami paper with illustrated fragments. We will focus on the simplest and fast way. The tiger turns out to be quite similar, but not at all scary.
To make such a tiger, we will need a square sheet of colored paper and a black marker. It is better if the paper is white on the inside. This will add texture to the craft.

Bend a sheet of paper diagonally and iron it with your fingers. Then we unfold the sheet, and bend the outer corners of the square, opposite the fold line, at right angles to it. We get a figure that is somewhat reminiscent of a kite.

Fold it diagonally, folded sides inward.

We bend the sharp corner down, unfolding the edges. We bend the corners at the bend, forming ears. To make the ears rise above the head, fold the middle of the fold. We wrap the sharp end of the corner inward.

This is the face we get. Let's start forming the tail.

We bend the bottom corner, then tuck it inward along the fold line and smooth the fold with our fingers. The tiger is ready. All that remains is to draw the eyes, the muzzle, and, most importantly, the stripes.

How to make a tiger out of paper/video/

Conclusion:

Making a paper tiger is not at all difficult. Even a baby can do it. Such crafts are perfect as an option for creative activities in kindergarten. An original craft You can also decorate the Christmas tree.