How to sew a sundress: patterns and master classes. Office sundress or dress for a business woman Sew a sundress for work
A sundress is an indispensable element of a woman's wardrobe. It can be beach, home, city, office, and even evening. Sundress patterns will help you create any of these options yourself.
Do-it-yourself summer beach pareo sundress quickly and easily
The hot season requires light clothing, and a sundress comes in handy here. Natural, flowing, flying fabrics will help you feel comfortable and be irresistible both in your own garden and on an evening promenade along the streets of a resort town. Of course, there is nothing more convenient than a sundress for going to the beach.
The beach model can be easily made at home in an hour, using a minimal sewing kit and a primitive pattern.
For the “sundress-vest” you only need to take one measurement – the circumference of the hips. The resulting figure must be multiplied by two, this will be the width of the sundress. The length is determined arbitrarily, the main thing is that it covers the lower part of the swimsuit. The best option is to mid-thigh.
The length and width should be marked on the fabric and carefully cut out a rectangle. If the material is synthetic, it is enough to cut it with hot scissors without finishing the edges. Make two armholes in the upper right and upper left corners with scissors, and the product is ready.
If the fabric is natural, you need to add one and a half centimeters of stitching to each edge on the pattern, and additionally cut out two strips for the straps.
When sewing a strap, the rectangle of fabric is folded in half so that the wrong side is at the top, stitched along the length and width on one side, turned right side out using a hook or pencil, then stitched along the other side along the width.
The straps are sewn to the upper corners of the product, which has been overlocked on all four sides.
Putting on a sundress-vest is very simple. One strap needs to be thrown over the right shoulder, pass the fabric in front under the left arm, bring it back, forward again, and put the second strap on the left shoulder. The fabric will drape beautifully to the shape of your body and reveal a cute cutout at the back.
This model can be worn in other ways. Wrap it around your body, in front above your chest, and tie a bow or a nice knot. There should be enough material so that the fabric falls freely and completely covers the swimsuit. When walking, such a pareo sundress will flutter beautifully, showing off a tanned body, but will not make the image too frivolous.
How to sew a model with a flounce on the shoulders?
Over the past few seasons, off-the-shoulder clothing has not gone out of fashion. To get into the trend, just complicate the pattern of your summer sundress a little, and sew the product with a beautiful flounce on the shoulders.
For this you will need:
- textile;
- threads to match;
- chalk;
- safety pins;
- scissors;
- measuring tape;
- notepad and pen;
- elastic band from 1 to 1.5 cm wide.
The work is carried out in stages:
- The first stage involves taking measurements. For a simple dress, you traditionally need to find out the half-circumference of the chest, waist and hips. If the dress is not fitted, it is enough to measure the chest and hips. If the chest is very full, when cutting the fabric, extra centimeters for darts are taken into account.
The measurements determine the size of the finished product, so it is important to get it right. To avoid mistakes, you can use a cheat sheet from the Internet;
- The second stage is drawing the pattern. You need 4 parts: two for the base of the dress, two for the flounce. The length and width of the dress are cut out in accordance with the measurements received, plus 3 centimeters for an allowance on each side. The size of the flounce depends on how draped it should be, plus 2 centimeters for the seams. A belt is cut out separately from the same fabric;
- The third stage is sweeping. It is necessary to reduce excess or make a new pattern if there is a risk that the item will be too small. In addition, it is easier to work on a machine when the parts are already fastened together with a preliminary seam. It is better not to sew the shuttlecock to the base, but to pin it with pins;
- At the fourth stage, a machine is used for flashing. The two base rectangles should be sewn together, not reaching 25 cm from the top edge - these will be the armholes. You need to lay a finishing stitch along them.
The parts of the flounce are sewn together at the side seams, then you need to connect the middle of the base dress and the middle of the flounce so that the same amount of fabric protrudes at the edges. You should end up with a T-shaped dress with some extra fabric allowance on top. Next, pin the two parts together and sew the flounce to the base from armhole to armhole on both sides.
Now it’s time to hem the top of the sundress with a closed hem seam, leaving a small area through which the elastic will be threaded. The width of the seam should be slightly larger than the width of the elastic, the length of the elastic should be equal to or slightly less than the circumference of the shoulders.
To thread the elastic, it will be convenient to fasten a pin to one end of it, insert it into the unstitched end and, gathering the fabric, stretch it around the entire circle to the next hole in the seam. The ends of the elastic can be basted to make it easier to sew on a machine, and the pin can be removed.
When the top of the dress is ready, all that remains is to hem the hem and the lower edge of the flounce with a hem seam and finish them with an overlocker. Lastly, the belt is sewn, and the sundress with a flounce on the shoulders is ready.
This model is suitable for girls with absolutely any figure. It can be modified with a belt and accessories, and made into your favorite outfit for a walk or a romantic date.
A sundress with flounces can also be made from knitted fabric. The results are very interesting and unusual models that are perfect for both a walk and an evening out. The following video will show you how to do this:
Boho style sundress pattern made of linen
Boho is the name of a style that implies an abundance of cotton fabrics, floral motifs, bright colors, lace, long floor-length skirts, and other paraphernalia of bohemia and “flower children.” All this is perfect for summer sundresses.
The choice of fabric depends on the style direction. A model in a classic style will be made of velvet or knitwear, boho glamor is embodied in lace and chiffon fabrics, hippie chic gravitates towards burlap and suede, boho-eco for naturalness. But the most versatile option for warm weather and everyday wear is a linen sundress.
Linen clothing is 100% natural, has unique hygienic properties, breathes, does not cause sweating, and is pleasant to the skin. It is easy to wash, dries quickly, does not fade, does not fade, and is practical to wear. In addition, linen items look unusual, stylish, and, despite their brevity, expensive.
photos
The simplest boho-style linen sundress pattern consists of a minimum number of details and does not require complex measurements. This is the so-called sundress-apron with wide straps.
The pattern is assembled from three or four parts, depending on whether the sundress is planned to have a back, or whether the straps will be sewn to the skirt waistband. A classic sundress-apron consists of a chest, crossed straps and a skirt.
To draw a pattern, you need to measure the width of the chest (chest part of the sundress) and the height of the chest part. The length of the straps consists of the height of the back and half the height of the front plus 2-3 centimeters for the seams. The width of the straps is chosen arbitrarily.
The pattern is presented below.
Sewing begins with sewing the breast separately and stitching the straps. The straps are sewn to the chest, then folds are collected on the skirt fabric. A belt should be placed on the back; to do this, a strip ten centimeters wide is cut out and stitched.
The hem of the skirt is hemmed with a hem and finished with an overlocker. Lastly, you need to sweep away the top and bottom parts of the sundress and sew everything on a machine.
The color of a summer sundress can be any: white, blue, green, dark blue, cherry, brown. Fabrics with small floral prints, corduroy and ethnic motifs are suitable.
It is important to wear a sundress-apron over a T-shirt, T-shirt, or blouse. As outerwear, it will be complemented by a large knit cardigan, a thin parka or a faux suede jacket.
For pregnant women
Summer with straps
This model is specially designed for changes that have occurred in the figure. It sits quite loosely, without tightness or constraining the belly, and emphasizes the beauty of a woman during pregnancy.
Modeling the pattern is very simple. A classic sundress with wide straps consists of only two fragments: the base and the straps themselves.
For the base, you need to measure two parameters: the length from the armpit to the knees, calves or ankles as desired, and the width equal to the waist circumference at the point where the stomach protrudes most.
If there are still a few months left until the end of pregnancy, the width can be arbitrarily increased by 10-20 centimeters so that the sundress turns out “to grow.”
Warm
For cooler weather, you should stock up on a model with large pockets made of wool blend fabric. It will go well with turtlenecks and blouses. The sundress will look different if you sew it from jeans, velvet or any other dense fabric.
In addition to the main fabric 120 cm long, you will also need a lining for the pocket and adhesive, as well as an elastic band, tape for the drawstring and standard sewing equipment.
Enlarge the following pattern details to the desired size and print.
photos
Uncover
Fold the fabric in half and distribute the patterns over it. The bottom is cut out separately. After securing the pieces with pins, trace the outlines, add 1.5 cm allowances on the sides and 2 cm at the bottom, then cut out.
Two pockets are cut out from the lining fabric with allowances, which need to be pinned to the lower part of the front. For density, keeper tape is glued to the wrong side.
photos
Assembly
We sew down the middle section of the upper parts of the front, process the seam allowances and press the seam (the last steps apply to each seam). Sew the bottom part, matching the pockets. Then we grind down the darts. Next we connect the back parts and shoulder sections.
From the remnants of the fabric we cut out facings and sew them on, having previously reinforced them with adhesive material.
Having tried on the sundress, mark the line for the drawstring (approximately 10 cm from the chest line), grind the ribbon, grind the side sections and thread the elastic into the drawstring. All that remains is to process the bottom edge and decorate the new thing with beads or any decor of your choice.
photos
For plump women with scent
It is a mistake to think that dresses are the prerogative of exclusively slender young ladies. There are a considerable number of sundress models that can highlight the appetizing shapes that have captivated men from the Renaissance to the present day.
At home, it is important to choose the right style. On a full figure, from size 52 and above, wide models look good, but not shapeless robes, but with an emphasis on the upper body. Styles with a V-neck, which emphasize the ample chest and visually lengthen the neck, as well as models with a cut-off waist, are considered successful.
A universal option that hides flaws and focuses on the advantages of a voluminous figure is a sundress with a wrap.
Along the waist line, cut off the top of a preferably unfolded pattern. We close the chest dart and expand the waist dart. We make a cut to the top of the closed chest and place a point, as shown in the drawing.
Let's move on to shaping the bodice. From the top point in the side cut we put 4 cm down. From the resulting point to the right we put 1 cm (point 6) and draw a parallel line.
From point B4 (middle front line) 13-15 cm are measured on the pattern (point K). You can do more. From the bottom top of the shoulder dart G7, measure 10 cm upward and get the second point (K1). Now we connect it with points K and 6. But since we need to design the smell, the line K1K should go to the left shelf, at least 5 cm from the line of the middle front.
Now you need to model the back. From the top of the side cut, measure down 4 cm and to the left 1 cm. From the resulting point, draw a horizontal line to the line of the middle of the back, and also down parallel, as in the front pattern. The waist dart is closed, and the cuts at the top and bottom are rounded with smooth lines.
The final version of the bodice is odorless.
In the second option, we reduce the side cut by 4 cm, and increase the length of the right rug by 5 cm. The lower dart is not closed, but gathered. Mark the beginning of the cup by measuring on yourself from the shoulder line. Then, as shown on the pattern, connect the top point with a straight line to the smell point and a smooth line with a side cut.
As for the skirt, it can be straight, flared or half-sun.
There is a third option. You can outline on paper an existing, for example, wrap top. If necessary, adjust and transfer to fabric. After cutting, we assemble the front halves and combine them.
To ensure that the model is fitted and unnecessary seams are hidden, we will cut out 2 parts of the yoke 10 cm high. A “sandwich” from the yoke, bodice and the second part of the yoke is sewn together. In this case, both should be facing outward. We process the armholes with bias tape.
The back will be gathered with elastic. For it, a rectangle is cut out 1.5 times wider than the size of the back and the length from the beginning of the front armhole to the end of the yoke.
Having made the hem and stitched the back with an elastic band, we sew it to the front. All that remains is to cut out the skirt and finish the bottom.
For an example of modeling a chiffon sundress, see the following video.
Modeling a sundress dress with an open back
A thin green linen dress with a slightly low waist will perfectly highlight your tan. It will also add brightness and a little extravagance to the image.
On the basis pattern for the front of the dress, we transfer the chest dart into relief as follows: we divide the armhole line in half, put a point from which we draw a smooth line through the dart at the waist. The shoulder dart closes. Then we increase the waist line by 2 cm, and deepen the armhole line.
On the back, we deepen the neckline and armhole, and move the dart at the waist to the side cut. The waist line also lengthens.
For a skirt, measure the hip circumference.
Draw a rectangle. The width is ¼ of the hip circumference, and the length is 60 cm. For a loose fit, add 3 cm.
In the front of the skirt at the top, measure 10 cm to the right and 25 cm down. Cut off the side and cut it separately. We draw a pocket.
The final result is below.
In addition to linen, crepe, satin, poplin or any other cotton fabric is suitable for this sundress. The model is fastened with a zipper at the back.
Also, when cutting all the parts, be sure to add seams.
For summer, a sundress with ties that completely exposes your back is also suitable.
Elastic model
An open back is beautiful, feminine, and most importantly, appropriate for an everyday look in the summer heat. Another undeniable advantage is that you can sew such a sundress yourself using a very simple pattern or without one at all.
Among the models that do not require preliminary construction of a pattern, the easiest to make is a sundress with an open back with an elastic band.
The basis of the style is a rectangle of fabric, where the width is equal to the circumference of the hips, plus 6 centimeters for finishing the edge, and the length is measured directly according to the figure from the level of the armpits.
By varying this parameter, it’s easy to get a playful short dress or a floor-length outfit for an evening out at a resort party.
When the base of the sundress is ready, it is spread out on a flat surface to mark the lines along which the elastic bands will be sewn. It is important to consider that regular elastic bands are not suitable for this purpose. They will look rough, wrinkle the fabric unsightly and squeeze the chest.
For a sundress, it is better to use an elastic thread, and you need to stitch the fabric before the rectangle is folded along the back line or side seam into a full-fledged sundress.
There are two ways to sew an elastic thread to fabric: stitch it in a zigzag, applying it to the wrong side of the product, or insert it into a bobbin and use it like regular thread.
The second option is faster and simpler, but in both cases it would be useful to mark lines with chalk along a ruler at the same distance so that the line turns out smooth and beautiful.
A horizontal gather with an elastic thread can fill the entire upper part of the sundress or be placed only above the chest and along the waistline. If it fills the top, then the distance between the lines should be approximately 1 cm. If these are two independent lines, 4-5 rows at intervals of 1 cm are enough.
A rectangle of fabric, gathered with an elastic band, is stitched from the wrong side. Then the bottom edge needs to be turned to the wrong side by 1 cm, sewn with a straight stitch, folded another 1 cm, ironed, and sewn on the front side of the product. This method is called double hem cutting.
A wide variety of fabrics are suitable for dresses with elastic. A plain version in a fashionable color is easier to combine with other wardrobe elements. A sundress with a pattern is more self-sufficient and original. Floral motifs, ethnic and animal prints look beautiful among the patterns. Geometric patterns can be spoiled by the number of elastic bands, as they are hidden by numerous folds.
Modeling a straight cotton model
A cotton sundress with a straight silhouette is the embodiment of simplicity and femininity. This model is very variable in combination with things of different textures and fabrics, practical, and suitable for owners of different figures. A straight, elongated sundress visually makes any woman taller and slimmer, while plain fabrics and a narrow vertical stripe will help hide extra pounds.
You can draw a pattern directly on the fabric, without resorting to the complex engineering design method that a paper base requires:
- First of all, measurements are taken. You only need three of them: chest, waist and hips. The length of the sundress is a purely individual matter.
- The simplest option with sewn-on straps consists of two halves. For the backrest, you need to mark the length, put the EG, OT and OB measurements on it, first dividing the value by 2, connect the points with a smooth line. For a slim figure this will be enough; for a fuller figure, waist and chest darts are needed.
- The top of the sundress can be straight, then the neckline will be square, V-shaped or round. Any of these options can be drawn in advance by hand.
- The width of the straps is also very variable. Thin straps will look better on thin shoulders, and moderately wide ones on sloping and full shoulders. Straps made of fabric of a different color, plain or lace, look interesting. Lace can also hide minor imperfections in the upper part of a sundress and lengthen a too-short hem.
Just a few lines, and a beautiful sundress for the summer is ready!
Like any product, after basting, a straight-cut sundress is tried on and checked for any flaws in the cut. Then they are sewn on a machine and decorated if desired.
Another accessible way to sew a straight-style sundress without drawing work is to create a pattern using a T-shirt that fits well:
- A suitable T-shirt is applied to the fabric from which it is planned to sew the sundress;
- Pin along the edges with safety pins and carefully outline with chalk on both sides;
- Then draw the bottom to the desired length. To the resulting silhouette you need to add 2-3 centimeters to the seams. Cut and stitch two one-piece pieces.
- You can also sew a straight-cut sundress from a modified pattern of a sleeveless straight dress. You just need to widen the side seams of the basic model to make it easy to put on a sundress without darts, and insert a side zipper.
It is advisable that the item is not made of stretch materials. Cotton does not have the ability to stretch as much, and the sundress may turn out to be a size or two smaller.
Floor-length with American armhole
The American armhole is a special cut for the upper part of a top, blouse or dress, sleeveless, implying a beautiful diagonal line from the armpits to the neckline. It completely opens the shoulders, while the neck can also be shown or covered with a stand-up collar.
According to the rules of style, the open top is balanced by a closed bottom - a maxi-length skirt.
The American armhole makes the item more feminine, attractive and elegant. It emphasizes beautiful women's shoulders, which are not only convenient, but also fashionable to show off in the summer.
Cutting this model is not difficult; even a novice seamstress can handle it.
The following measures will be needed:
- waist circumference;
- hip circumference;
- length of the product from the waist to the floor;
- side length from the bottom of the armhole to the waist.
The result should be one large piece, on which you need to mark the height of the neckline, the depth of the back neckline, the depth of the armholes and the cut line in the middle. You can cut the front and back separately.
The model is stitched according to the following scheme:
- Along the front center line, the dress is cut to the cut mark, then the two halves are tucked in turn and stitched on a machine. The narrower the hem, the neater the neckline looks.
- The armhole and neckline on the back are processed with an overlocker, turned up 1 centimeter and stitched. If the fabric supply allows, you can make a double hem. The neckline is made in the same way.
- An elastic band is inserted into the drawstring along the cutout of the back (it should only be at the back), which needs to be pulled together a little and secured with a lower stitch. This is done so that the dress from the back fits the figure and does not hang in a fold.
- For the neck drawstring, you need to sew a binding, which when finished will be no wider than 1 cm, or choose a beautiful braid. It serves as a tie. A braid made from strips of fabric instead of trim will look original.
- Thread the finished tie into the neck drawstring. You can tie it around your neck or cross it on the back and sew it to the back neckline.
A sundress with an American armhole claims to be elegant, so it is recommended to choose high-quality material in rich, noble shades. A single-color model will be decorated with a belt, handmade jewelry, stripes made of beads, beads or artificial stones in an ethnic style.
The maxi length makes this item easy to pair with flat shoes, heels and wedges. A simple model without decoration will withstand the current combination with white sneakers or light sneakers.
Trapeze sundress
A sundress with a laconic cut in the shape of a trapezoid is a successful basic item both in the summer wardrobe and in the cold season. The wide hem hides the tummy, wide hips, imperfect waist, and emphasizes slender legs. A simple top is equally suitable for owners of neat breasts and a full bust, focusing attention on beautiful shoulders and arms.
A trapeze sundress can be with or without sleeves, with patch and secret pockets, with a varied neck shape, with embroidery, lace, flounces on the hem and other decor. It’s so easy to sew any model that even someone who has never attended a cutting and sewing course, or cut anything other than a chintz apron in a technology lesson at school, can do it.
The choice of fabric should be given special attention. The material should be quite dense, drape well and keep its shape, not crumble at the cut points.
Absolutely any color is suitable, but it is better to give preference to plain fabrics. The style is interesting in itself, and does not require additional measures to attract attention, so fabric with a pattern may look tacky.
You can cut out a sundress directly on the fabric, using, for example, thick knitwear with a stretch effect as a basis:
- With a width of 1.5 meters, you will need only 1 meter of length, since the style assumes a short length.
- First, you need to fold the fabric in half twice with the wrong side up (the pattern will be cut out on it) to get a rectangle with sides of 100 and 37.5 centimeters. Then, using chalk and a ruler, the construction of the pattern begins.
- The first thing to draw is the neck. The depth and shape can be any; the classic version is a narrow round neckline 4 cm deep and approximately 8 cm wide.
- Next, from the top point of the neckline, the height of the armhole is laid down, equal to half the girth of the armpit. Through the bottom point of the resulting segment, from the right edge, a line equal to one-fourth of the chest volume is measured.
- If the model is planned without sleeves, 5-10 centimeters are measured from the neck height point to the left for the shoulder seam. The extreme point of the segment is connected by a smooth line to the extreme point of the OG - these will be the armholes.
- Then the length of the product is set aside. It can be made as large as the fabric supply allows. The average length is approximately 80-90 cm. The corners are smoothly rounded, forming a hem line with a margin for hem.
- The last step of pattern construction is to draw one diagonal line from the extreme point of the hem to the bottom edge of the armhole under the arm. The drawing is ready and can be cut out. It turns out two parts, one of which is the front part, and the second is the back. The neck of the front part can be made a little deeper.
- Further actions are predictable and simple: sweep away two parts, try on the item, adjust if necessary and start stitching on the machine. All internal seams are finished with overlock. The hem is made as narrow as possible, so the product looks neater.
How to sew a trapeze sundress in just an hour is in the next video.
A trapeze sundress can be worn as an independent element of the wardrobe, or can be incorporated into sets over blouses, shirts, items with long sleeves and a high neck.
Modeling a warm business sundress
A business wardrobe doesn't have to be boring. A warm wool sundress can dilute classic trousers and pencil skirts, adding a zest to the image of an office lady, which is acceptable even with a strict dress code.
The best fabrics for an autumn-winter wardrobe are wool, wool mixture, thick knitwear, and viscose. They retain heat well, drape beautifully and take on the contours of your figure. In a monochromatic design, dark blue, brown, black, gray and anthracite are indispensable in business style. With them you can create multi-layer sets that will not be cold on the way to work and not hot in the office when the heating is on.
Sewing a sundress in a business style is also not difficult, although it will require more time, diligence and correct construction of the pattern. A base pattern based on individual measurements is best suited.
In the drawing of the front of the dress, we close the shoulder dart and open 2 darts in the armhole and along the side cut. The latter should be directed to point A, which was obtained by increasing the chest dart by 2 cm.
We draw a new armhole line and remove the dart at the waist.
We take the resulting pattern and cut it along the waist line.
We model the collar, shown below, and re-shoot it separately. We cut off the yoke.
Let's move on to the back. We remove the dart at the waist, increase the armhole by 1 cm and deepen the collar, and glue the front yoke to the back shoulder.
The end result is details like these.
When applying a pattern to fabric, you should also add seam allowances.
The collar (4 parts), belt, bias tapes for the throat and armholes are cut out of leather. For a belt, 10 cm width will be enough. And the length is equal to the waist circumference, to which 90 cm is added.
We hope that the master classes and examples of modeling simple summer and winter sundresses we have selected will help you sew the ideal model that will delight you for many seasons.
You can see master classes on sewing sundresses in the following videos.
A winter sundress for obese women can safely be called clothing of a universal format. The formal cut is great for work in the office, but if you complement it with some interesting accessories, the sundress turns into a stylish look for the evening. Winter is not a reason to deny yourself beautiful things and change into thick trousers. We will show you some examples of how you can dress in winter so that you are both warm and beautiful.
The most successful models
Sundresses with a thin belt or other similar elements that emphasize the waist work well for women with an hourglass figure. Such accents will make your waist thinner and you slimmer.
Sundresses with a straight trapezoidal cut are perfect for all body types.
To visually lengthen your neck and make your face a little thinner, you should choose sundresses with a V-shaped neckline for your wardrobe.
With an emphasis on the waist
The criteria for selecting fabric for a winter sundress are not very strict. The main thing is that the fabric is warm, comfortable and not fattening. It is better to avoid fabrics that are too thin, that do not hold their shape and are tight where they should not be. Based on these criteria, we advise you to pay attention to the following fabrics when sewing a sundress with your own hands:
- Thick denim;
- Wool;
- Knitwear;
- Jersey.
A model with an emphasis on the waist is perfect for both girls with problematic figures and those with standard measurements. The sundress is made with the addition of leather inserts, which turns it from a simple model into a stylish and unusual thing. It is worth paying attention to only one point: this sundress should not be made of very thick fabric. Otherwise, this model will begin to resemble a vest or similar, more formal clothing.
Sundress patterns are made using the pattern of an ordinary simple dress.
We are working on the front part of the sundress.
Let's delve into the construction of the front part of the sundress in more detail. An obligatory point in working on our product is closing the dart located on the chest. We need to place the dart in the armhole, and the shared dart in the side section exactly as shown in the photo. The partial groove goes to the highest front part, let's mark it with the letter “A”. This dart must be made two centimeters shorter. Once we have done this, we outline another stripe of the armhole.
We transfer the front of our product to transparent film, cut the shape to the waist and work further on the top of the dress. We transfer the front of our product to transparent film, cut the shape to the waist and work further on the top of the dress. It is necessary to work out the entry along the front part, additionally measuring three centimeters from the center of the front part to the left along the section of the belt, the V-shaped collar with a lapel and the upper cut-off part of the bodice.
We remove the upper part of the bodice and move the collar lapel. Working with the back of the sundress. The back of the product needs to be worked out in exactly the same way as shown in image number five. We attach the upper part of the front bodice along the shoulder line to the back.
The time has come to start decorating the future product. We will need a piece of leather, either artificial or natural. From this section we cut out four parts in the shape of the collar, parts for the front, an armhole of three centimeters and a section for the belt, which in length will be equal to the girth of the waist part plus ninety centimeters, and in width will be equal to ten centimeters.
When cutting the product, do not forget to take allowances into account. One and a half centimeters for each part, and four centimeters for the lower part of the skirt.
Sewing product
We have cut out all the components of the sundress, now they need to be sewn. We sew the undercuts from the very beginning. We connect the parts of the collar to each other with the outer sides, grind the edge that requires processing, cut off the excess fabric and sweep out the entire collar.
We place the collars on pieces of leather, stitch them by hand along the front neckline and upper part, then the shelves are stitched in single layers. The right and left shelves are connected, combining the center of the front part. The upper and lower parts of the skirt are sewn down.
Next, the darts of the upper part of the bodice with shelves are sewn by hand, and the sides of the product are also sewn. We sew the sleeve armholes and front neckline on the bias. The leather for the belt is stitched. When all the details of our sundress are sewn, it can be called finished. We have no doubt that this item will become one of the most beloved in your wardrobe.
A few more sundress models that you might like:
The office sundress pattern is useful not only for office attire. You can sew your own version, especially since any fabric for a sundress is suitable. Wool, knitwear, cotton, linen, blends and denim - you can cut them all.
Classic fabrics for the office are wool and gabardine. These fabrics are most appropriate in the office and are easy to process; with corduroy, for example, there is much more work. The sundress skirt can be lined.
Cutting details of a sundress for the office
Repeat operations for the inner layer of the bodice.
Place the bodice pieces right sides together and stitch along the top edge and straps. Press the seam, notch at the corners, and turn the bodice over the face. Sweep out the seams and press. Sweep the bottom and side cuts.
Sew the skirt to the bodice, overcast the seam, press the seam allowance up.
Sew the middle seam of the sundress from the bottom to the mark transferred from the pattern. Press the seam, press the allowances, baste the zipper to them, and topstitch.
Of course, all employees must follow the rules of the dress code, but still, one should not forget that a woman should always remain beautiful, so you can find a way out of this situation, for example, by purchasing a stylish office sundress that will meet all the requirements and will make a woman feel at her best.
In general, office sundress models differ from everyday ones only in style and color palette, so you shouldn’t think that it’s impossible to purchase a beautiful sundress that will comply with the dress code rules.
Models of office sundresses:
- sundress with long straps. This model has a long skirt with a high waist and straps extending from it. Such clothes can be worn with blouses decorated with ruffles or embroidery, but only if they are closed with all the buttons. The cut of such a sundress allows you not to cover the jewelry, so you can choose beautiful jewelry or jewelry to match the model.
- model with wide straps. This model also looks stylish with classic blouses, turtlenecks and shirts. The peculiarity of the model is that it allows you to disguise broad shoulders. A good solution would be to wear a light sundress and a dark blouse.
- models with decorative trim. Pockets, stripes, bows, lapels and much more serve as decorative trim. It is recommended to wear such a sundress exclusively in combination with a simple shirt or turtleneck without trim.
How to choose the right stylish sundress for office work?
When choosing a model for the office, you need to focus on the rigor of the product and its color scheme, because according to the rules of the dress code, it is forbidden to wear short, tight and bright clothes in organizations.
For the office, you need to choose business sundresses, made in a classic style from a single-color material. Of course, bright models are allowed, but this does not mean that you can choose unusual styles, made in bright colors and decorated with many decorative elements.
For the office, it is best to purchase sundresses in black, white, beige, blue or gray.
You can also pay attention to models in pastel shades. So, you can choose an original combination, for example, you can bring to life the following ensemble: a black sundress and a blouse with stylish decorative elements made of flowing fabric, but the sundress should have a straight cut.
You need to choose such clothes for the office from thick and opaque fabric.
Also, when choosing, you need to pay attention to the length of the business sundress, in other words, for the office you need to choose models just above or below the knee. The “maxi” and “mini” models that women love so much are not acceptable for the office.
What to wear with an office sundress: accessories and shoes
It’s not difficult to choose a stylish office sundress that will highlight your figure; it’s much more difficult to choose accessories and shoes.
For a summer office sundress made of chintz or cotton fabric, it is best to choose sandals with thick heels or ballet flats, which will give your feet comfort and comfort while walking.
An office sundress made of denim also goes well with boots in the cold season, and ballet flats or sandals in the warmer months.
Chic sundresses for plus size people. (video):
For a knitted sundress, it is best to choose ballet flats, high-heeled shoes or stilettos.
A sundress made of linen fabric can be worn with open shoes, for example, with open-toed shoes.
The choice of accessories for such clothing should be approached carefully, because such clothing itself is neutral and therefore the selected accessories should complement the laconic image.
As an addition, you can choose a wristwatch in a classic style, discreet jewelry, as well as small jewelry.
When choosing a bag, you can pay attention to a flip-over model or a case bag that can accommodate all the documentation.
Fashionable office sundresses for plus-size beauties
It will not be difficult for owners of curvaceous figures to choose a beautiful business sundress, because modern stores offer a variety of models that will highlight the beauty of a woman and also correct her image.
For those with curvy figures, it is best to pay attention to:
- A-shaped silhouette models;
- models whose cut is close to sheath dresses;
- high-waisted models.
It should be noted that for those with curvy figures, most models of sheath sundresses are presented. Such models will disguise fullness and at the same time create a supportive effect.
When choosing a business sundress, you should also pay attention to the fabric from which it is made. So, almost all materials are suitable for such women, with the exception of some, in other words, such women should not pay attention to sundresses made from thin knitwear, silk and the finest denim, since such clothes will not hide their fullness, but will only emphasize it.
See also our other articles:
Not the least important when choosing such clothes is the color scheme. Don’t think that designers have prepared exclusively plain models for overweight women.
How to sew a beautiful office sundress with your own hands at home
Sometimes some women have difficulty choosing office clothes, but they should not despair, because if a suitable sundress is not on the store shelves, then you can sew it with your own hands.
To sew the product you will need:
- material;
- measuring tape;
- scissors;
- needles;
- threads;
- sewing machine.
Before starting the process, you should determine the length and style of the future sundress.
It is also required to take all measurements: the length of the product, the volume of the chest and hips. If the model has a neckline or neckline, then you need to take additional measurements.
Paper patterns need to be transferred to the fabric, but a note should be left for processing the seams. To mark the fabric, you should use a chalk, which can be erased after sewing.
The cutting details need to be cut using scissors and the finished sketches swept away. Next, you need to try on the sundress and if you are satisfied with the work, you need to proceed to the final stage.
Using a sewing machine, you need to sew all the seams and process the allowances. Finally, you need to carefully iron the sundress from the wrong side, paying special attention to the seams.
Warm sundresses for the office: comfort and beauty
Until quite recently, women associated sundresses exclusively with summer clothing, made of light, bright fabric with patterns. But today, due to their versatility and practicality, they have firmly entered the life of business ladies and now the fair sex wears such stylish clothes all year round.
Warm business sundresses have a strict silhouette with a tapered or tulip skirt. The length of such models reaches the knee, because, as you know, it is forbidden to wear short clothes in offices.
Warm sundresses are made from natural and practical fabrics: wool, tweed, viscose, knitwear and cotton.
Did you like the post on the site? Take it to your wall: ! Be fashionable and stylish always! 🙂 Smile and be happy, because you are beautiful!There is 1 comment on the entry "Office sundresses"
I have long wanted to add a sundress with this inverted checkered print to my wardrobe. In my opinion, he looks very nice and a little unusual. Yes, and for a strict dress code it’s just right. No one will say that it goes beyond the Classic Style.
Leave your comment
When working in an office, be sure to adhere to a business style, as required by the corporate rules of many companies, in order to maintain the company's image. Therefore, it will be useful for craftswomen who sew clothes for themselves and to order. The simplest version of such a wardrobe item is a sheath dress, for sewing which a regular pattern of a fitted or straight silhouette is used.
The entire creation process can be divided into several main stages, after overcoming which you will create an excellent formal outfit.
Stage one: taking measurements
In order for the pattern of sundresses for the office to fit in size, you need to build it based on your own measurements. This is precisely the beauty of individual tailoring, because things that are sold on the market and in stores are sewn according to generally accepted standard volumes. And, as you know, they do not always coincide with real forms. That’s why girls have to try on a huge number of dresses to find the one that fits their figure perfectly.
So, to build a template you will need the following measurements:
- girth of chest, waist, hips, neck;
- back width;
- breast dart solution;
- shoulder width;
- chest height;
- length of the back and front to the waist.
Stage two: constructing a drawing of the workpiece
The pattern of a warm sundress for the office and the summer version are constructed identically, the only difference is the allowance for a loose fit. For a summer product, add 1 cm to the measurement, and for a warm product - 2 cm.
The drawing is developed on the basis of a quadrilateral with sides corresponding to 1/2 the volume of the chest + an increase in the length of the product. Horizontally in the drawing, you should immediately mark the height of the chest, waist, hips and draw lines that form an auxiliary grid.
At this stage, the main pattern of sundresses for the office is ready. It can already be used for sewing products from thick and thin fabrics.
Modeling and design
The workpiece can be modified by adding raised seams. To do this, the pattern of sundresses for the office is drawn out in accordance with the desired lines, and then cut into elements. In this way, you can mark boundaries for combining different colors of fabric, or you can simply make seams and stitch them beautifully.
Stage three: cutting and assembly
How to cut for summer and for the office? The pattern must be constructed taking into account a loose fitting allowance, which is added not only along the chest line, but also along the hips and waist. Otherwise, the product will hinder movement. The only exception may be fabric with elastane or knitwear. Otherwise, cut as standard. An allowance is made along the contour of the parts to process the seams: along the hem - 4 cm, and along the seams - 1 cm. If the fabric is very loose, then the allowance can be increased.
To make the product easy to put on, it is better to make it with a zipper. To do this, you can use a tractor or secret lock 75 cm long. It should be inserted into the middle seam of the back, on which you can also make a cut for a comfortable step. You can also make it tapered at the bottom for the office. In this case, the patterns are narrowed along the side seam from the hip line to the hem by about 5 cm.
Stage four: decorative design
A completely simple-to-build blank in combination with a calm fabric will make the product strict, and in order to somewhat improve the image, it needs to be properly decorated. For example, embroider it at the neck with discreet stones to match the main fabric, or make a lace or contrasting collar. A thin belt at the waist would also look nice, for which you definitely need to make belt loops. This product can be worn with a thin mesh neckline or a plain tight knitted T-shirt.
The simpler the silhouette, the richer the material you can choose. And we are not talking about color at all, but about texture. The embossed weave of the fabric is an ideal option for a relaxed sundress. A product with embroidery along the field of the material will look original. Such a sundress will not need to be decorated and supplemented with vertical seams and trim. The simplest sundress pattern for the office is suitable here.
"Burda" is one of the sewing magazines that quite often uses similar techniques with a minimum amount of detail and maximum fabric saturation. It is precisely these wardrobe items that, as a rule, become the most beloved, because there is nothing superfluous in them.