DIY paper crown. Cutting template
Autumn, with its bright colors, simply beckons you to go outside. I would like to collect a bouquet of beautiful leaves and late flowers and build a herbarium. But from natural gifts you can make not only a bouquet, but also a decoration. For example, the autumn crown. How to make such an unusual accessory, read below.
Crown with rowan
It is not difficult to build such a headdress. We will need a headband, a glue gun, flowers, rowan berries and dry leaves. If you are preparing the autumn crown in advance and want it to last for a long time, then you will have to prepare the leaves first. They need to be ironed and allowed to dry thoroughly, preferably under pressure.
Let's start making the headdress. First of all, we glue the rowan branches. They are heavy and bulky. It will be easy to hide the rest of the flowers and leaves under them. Now we place the main accents. We will make them using large asters. They can easily be replaced with chrysanthemums or other flowers that grow in your country house or garden. When the accents are set, we begin to glue the leaves. The main thing here is not to overdo it. 3-4 is enough large leaves and 3 small ones. The final step is gluing small dried flowers. The autumn crown is ready.
Head decoration made of small flowers
Such a simple and elegant decoration can serve as a crown at an autumn ball. It’s quite simple to create such an accessory with your own hands. We will need a rim again, but this time a thin, wire one. Our crown will be made from orchid flowers, barberry berries and willow branches. The picture shows a sample made from artificial flowers. You can create your headdress in the same way or decorate it with live plants. We select flowers and berries in one color scheme. If you are making a craft from artificial material, then it will be quite easy to paint it.
Let's start production. Glue flowers to the headband. They are large in the center and small on the sides. The remaining space needs to be filled with willow branches, to the ends of which we will tie berries with wire. The weave can be chaotic and asymmetrical. The main thing is that in the end the flowers and berries are distributed evenly.
Crown of maple leaves
This is a rather non-trivial way to make a headdress. Our autumn crown will consist of a cardboard rim, maple leaves and gold beads. The first step is to prepare the material. We dry the leaves and make a cardboard rim 4 cm wide. First we glue the front row of leaves. We bend the rim and secure them with a glue gun. Thus, the cardboard strip was surrounded on both sides by leaves. Next we glue the second row. Now we fix the leaves on the back side of the rim. Thus, we make the “wrong side” beautiful. The final touch is gluing the gold beads. It is advisable not to attach them along the entire perimeter of the crown; it is better to place such an emphasis on the front part.
Crown hat
Children simply adore this headdress. It replaces summer wreaths with them. Even a child can make a crown for an autumn ball from maple leaves. We will tell you two methods for making it. The first method is similar to weaving dandelion wreaths. Only here, instead of flower stems, we will bend and add branches of leaves.
The second method is more time-consuming. For such a crown you will have to make a cardboard base in the form of a circle. We will tie ribbons to its ends, which will make it easy to take off and put on the headdress. The maple leaves will need to be ironed and dried first. And then, using a glue gun, fix it on a paper rim. It is advisable to make the crown magnificent. Therefore, you need to glue the leaves not in one, but in at least two rows.
Gothic crown
This headdress looks quite intimidating. But some girls achieve exactly this effect. It’s very easy to make an autumn one in this style. We will need thick wire, branches, electrical tape, paint, chains, beads and autumn leaves. Let's start manufacturing. First, let's twist the wire into a headband. Then we wrap it with a branch. For this purpose, you can use soft and pliable willow twigs. Now, using electrical tape, we attach the branches to the crown. These can be branched branches of an apple tree or rowan tree. When everything is ready, paint our headdress black. It is advisable to use spray paint for this purpose. This will ensure that the color pigment is evenly distributed. After the crown has dried, attach chains and beads to it. You can repeat the option from our sample, where one bead is in the middle, above the forehead, and the other two are located in the area of the ears, or you can come up with your own version of the decor. The final action is to string dried leaves onto the crown.
Crown of flowers, butterfly leaves and ribbons
This headdress resembles the one we talked about in the first paragraph. But only this version of the crown is more complex. Here we will use both living and artificial materials. How to make an autumn crown this way? Let's get started. First, let's take a wide plastic rim, it will serve as the base. We glue asters and chrysanthemums to it with hot glue. We will complement the crown with both dried golden leaves and greenery indoor plants. Grape branches will play a special role in our headdress. We glue them on the back so that they fall beautifully to the back of the head. You need to weave beads and real berries into them. Decorate finished crown you need butterflies, dragonflies and colored ribbons. And remember that such a headdress requires flashy makeup.
The tradition of making flower crowns has existed for many years and remains very popular in modern world. Whether it's a music festival, a wedding celebration or just a day out with friends in nature, a flower crown is an accessory that will give an irresistible look and a wonderful mood not only to its owner, but also to those around him. Not bad, right? In fact, it is very easy to make such an accessory from available materials that can be found at home or purchased in a store. Follow the instructions and you will make your own flower crown for any occasion!
Materials:
- floral wire
- floral tape
- nippers or scissors
- green
- flowers
We used small flowers and greenery. Depending on the color scheme and desired size, you can choose any flowers you want, you can even use artificial ones that will delight you for a long time.
So let's get to work. First, measure your head to get an idea of how big your crown should be and add an extra centimeter for flowers. Cover the wire with floral tape in one or two layers.
Let's start decorating our crown with flowers and greenery. Start with a layer of beautiful greenery to act as a base. Secure the stems with floral tape
Now it's time to add Attach the stem to the crown and wrap it several times with lettuce, just like we did with the greens, you can cut off the excess stems with scissors or wire cutters. You can space the flowers evenly around the entire crown, or just focus on the front or back of the crown. You can use more flowers or, on the contrary, greenery. Use different types colors to create an unusual look and texture.
Honestly, there is no wrong way to make a flower crown. It really depends on what event you are making it for, what hairstyle you plan to wear and what flowers you have on your hands.
For work we will need:
- green cut beads - 75-100 gr.
– lilac beads – 75-100 g
– small light green beads – 10 g
- large beads - 30 g.
- beaded wire
- wide hoop ( child size)
- floral tape
- satin ribbon (width 1.5 - 2 cm, length 1.5 m)
This decoration consists of several elements - a central flower with stamens, two half-opened buds, leaves and twigs with beads.
The flower petals, buds and leaves are made using the French axial weaving technique described above.
Leaves. (6 pcs.)
To make leaves, we prepare a base made of green beads. According to the above diagram, we make an axis of 10 beads. We twist the low part and the axle. Then we begin to weave arcs from the bottom. For the sheet to be sharp, the angle between the axis and the low one should be 45 degrees. After the first arc, we string one large bead onto the axis, this will make the sheet more airy and hide the unevenness of the beads. Thus, we make 4 arcs. We give the finished sheet acute form. The wire at the top of the sheet (axis) is carefully folded and cut.
Bud. (2 pcs)
The bud consists of two elements - the flower itself and the sepals, each element is woven in two copies.
The flower bud is also woven using the French technique. Prepare an axis of 15 beads lilac color. We weave 5 arcs, without adding beads to the central axis. We weave the sepals in the same way - the axis consists of 10 beads, the number of arcs is 5 pcs. The wire at the top of the sheet (axis) is carefully folded and cut. As you can see in photos 2 and 3, we wrap the elements in a bud and assemble them one by one.
Stamen. (5 pcs)
The stamens are made using the loop weaving technique. On a piece of wire 10-15 cm long in the middle, make one loop of 10 small beads of light green color. We twist the wire to a length of at least 3-4 cm.
Flower petals. (5 pcs)
To make flower petals, we prepare a base made of lilac beads. According to the above diagram, we make an axis of 15 beads. We twist the low part and the axle. Then we begin to weave arcs from the bottom. For the sheet to be sharp, the angle between the axis and the low one should be 45 degrees. Thus, we make 5 arcs. We give the finished sheet a sharp shape. The wire at the top of the sheet (axis) is carefully folded and cut.
Branch with beads. (4 pcs)
To make branches, we prepare a piece of wire 20-25 cm long, string one large green bead onto the middle of the piece and secure it with a turn in the middle of the wire. Then we randomly repeat the turns to the right and left, weaving branches.
Assembly The first step is to assemble the central flower from 5 petals and stamens. Next, we attach the prepared elements to the prepared hoop with floral tape (preferably to match the hoop), starting from the center. After the central flower is fixed, we attach the buds on the right and left under the petals, then we place three leaves in the same alternating order and finish with a branch of beads.
Decorating the floral ribbon satin ribbon to match, securing the ends to the hoop with glue.
Crown made of paper, beads, autumn leaves masters quickly. From the article you will learn what icing is and how to make a sweet tiara from cake mastic.
DIY beaded crown
Choose any of the options presented and go for it. See how easy it is to make a princess crown.
Here's what you'll need to get started:
- 2 types of wire: a thick section for the base and a thin one, on which we will string decorative elements;
- pliers;
- beads;
- pearls;
- beads.
Attach it with thin wire to the base. This is the kind of princess or queen crown you should get at this stage.
Next, string beads onto a thin wire. Attach these decorations to the base by placing a pearl or large bead inside.
This is such a cute queen crown.
If you don’t have beads, but have other materials, you can quickly make a head decoration for a girl.
For this we use the following:
- various beads with large hole diameters;
- cleaning tubes - 5 pcs.;
- wire cutters.
Now you need to cut the 3 remaining tubes as follows:
- the first - in half;
- the second - into 3 identical parts;
- from thirds - cut off 2/3 of its length.
Fold each piece in half and secure them to the crown as in the photo. In this case, the longest tube will be in the center.
String beads onto the decoration and the princess crown is ready.
How to make a keychain with your own hands?
If you need a crown for a girl but want to practice making a small piece of jewelry, then start by making a keychain. This thing will also certainly come in handy. You will be able to take out your keys and admire the keychain, which will be made in a single copy.
Here is a list of what you need for this craft:
- beads of three colors;
- fishing line;
- wire;
- pliers or round nose pliers.
Before purchasing beads, check to see if they have a hole large enough to allow two turns of wire to pass through them without obstruction.
Cut the wire to the required length and string 18 red beads onto it. Then pass the end through their holes and tighten the loop.
Place another 18 beads of the same color on this wire, also pass its free end through their holes, as a result, you will get a figure eight like this.
Place one circle of these small beads on top of another. Tie them together with the ends of the wire, trim off the excess edge.
On the remaining one, string 7 white beads, then one red one, then again 7 white beads. Fold this piece over to the opposite side of the ring and secure it.
Now, to the place where one red bead is located at the top, tie 2 more identical pieces of wire crosswise. Since it is bent in half, you will get 4 more fragments of the crown, string 7 white beads onto each of them, and secure with wire.
Wind another piece of wire to the top of the crown and place 12 blue beads on it. If it's a keychain, then thread the key ring through first and then secure the wire.
Here's how to make a crown so that it can become a small decoration or also a keychain.
Read how to literally make a brilliant head decoration in half an hour.
Paper crown - master class
It's amazing how this simple material It turned out to be such an elegant product. Of course, in addition to this basics, you will need something else, namely:
- gold wrapping paper;
- necklace made of artificial pearls;
- glue;
- decorative large stones in the shape of hearts, diamonds and small ones;
- glue gun;
- scissors;
- and, of course, thick white cardboard for the base.
You can first measure the child's head with a flexible measuring tape, and then transfer the measurement to cardboard. Cut with an allowance so that the edges can be joined and glued.
But don't seal them yet. Place the cardboard blank on the work surface, apply a design that will be inside the crown and on top of it. Cut along these lines. If you want your work to be perfectly neat, then first apply the design to the template, then attach it to the cardboard and cut it out.
The same template will help you create the desired golden curls. wrapping paper. Lubricate it from the inside with glue, attach it to the cardboard blank, and connect it. Glue the 2 parts of the crown together and at the back.
Now apply melted silicone from a hot glue gun to the bottom edge of the crown and place the bead necklace on this spot. If you don't have one, then use individual beads, gluing them at the same distance.
A glue gun will also help to attach large and small pebbles. When the work dries, you can put it on the head of a girl or boy. After all, this product can be created not only for a young lady. The king's crown is also made for the holiday.
The templates below will help you make the top cutouts on your headdress so that they are neat and even.
Choose the shapes that you like best and make a template based on them.
Jewelry made from mastic
Housewives know that this sweet mass helps to decorate confectionery products so that they turn into works of culinary art.
At first glance, it seems that making such a cake is very difficult, but it is not so. The cakes are baked from sponge dough in a round shape. If you don't have one, a frying pan will do suitable size, intended for cooking in the oven. You can even bake it in a slow cooker, in a bowl.
Then the biscuit is cooled slightly, removed from the mold, and cut into 3-4 layers with a sharp long knife. When they have cooled completely, brush them with buttercream and put them in the refrigerator. You can buy mastic or make it yourself from marshmallow candies or powdered sugar. Food colors will help you achieve the desired shade.
To make the mastic stick better, grease the cake layers with butter cream not only to connect them to each other, but also the top and sides of the cake. Cool it down.
After you have placed the mastic on the baked goods, you need to roll it out with a silicone rolling pin so that it lies flat and tight on the cake, and trim off the excess at the bottom. This confectionery product has decorations made from mastic pink color in the shape of rhombuses. Their reverse side is moistened with water and glued to the main layer, and then decorated with sugar pearls.
Making a magic wand from mastic is just as easy as making a crown. Such children's mastic cakes will become a bright and unforgettable moment of the holiday. Let's take a closer look at how to decorate a homemade cake in the form of a crown. There are several ways to make it.
You can get a mastic crown like the one in the photo if you stick to this method. For it you will need:
- plastic bottle;
- cling film;
- brush;
- kandurin;
- mastic.
Now sprinkle the board or table with powdered sugar, roll it into thin “sausages” and immediately place them on the bottle. Place the first one as the rim of the tiara, the rest form and decorate it.
When the plan is realized, you need to leave the crown to dry for 1-2 days, then cover it with kandurin and place it on the cake.
Decorations from mastic on this theme can be made a little differently. For the second one you will need gold food coloring. Roll out the mastic into a triangular layer. We cut it with a knife so that the workpiece is of this shape and is even.
Now, applying the glass, cut out identical round holes along the upper edge of the crown, and using a small stencil, cut out small circles. Decorate the crown with sugar pearls and leave it to dry well. plastic bottle or a jug.
What are icing and molds?
Very soon you will find out the answers to these questions and learn how to make incredible cake decorations from mastic. This is the product you will get if you use icing. For it, you need to draw a crown yourself or download your favorite image from the Internet.
After which it is put into a transparent file, and then the real magic begins. We roll up sweet strings from white mastic and apply each fragment to the corresponding drawing in the file.
Now you need to carefully transfer the still straight crown to a rounded surface, give it this shape and dry it for 1-2 days.
You can leave the tiara white or cover it with food paint, then you will get a golden crown.
You can get acquainted with molds - special forms right now. They will help you make a crown from mastic, which will turn out to be very elegant; a cake with such decoration will look expensive, as if it was made by great professionals.
Here is a list of what is needed for this creative work:
- silicone mold;
- glass wine bottle;
- glassine;
- food glue;
- mastic.
Place pieces of mastic in those mold elements that are most suitable for the crown. In this example, a mold was used to create a rose; you can take another one.
Start laying out the elements of the tiara on glassine paper, fastening them with edible glue.
After the crown is ready, all that remains is to cover it with kandurin using a brush and dry it.
DIY leaf wreath
If you are walking with your children through an autumn park or in the yard, invite them to make a crown. Such creativity will help children develop their imagination, learn to love the surrounding nature, and grow into creative people.
You will need very few materials and equipment, here's what:
- maple leaves;
- scissors or pliers.
Place the leaves in front of you. Use scissors or pliers to cut off the thick ends.
Girls love to dress up. and even more so for themed costume parties! If you are planning a Spring holiday, a birthday, staging a skit about nature, or just want to please your daughter with something unusual and memorable - make a flower hat!
DIY hat with flowers
You will need a square piece of construction paper for the base of the hat. You need to draw two circles on it: the inner one according to the size of the child’s head and the outer one in accordance with the desired width of the brim of the headdress. Then you need to divide the inner circle into sectors of 45 degrees and make cuts from the center along the lines. Now bend the “teeth” up. The base for the hat is ready.
The next stage is decorating the hat with flowers. Use 3-4 types of colored paper to make flowers and butterflies. It's good if there are flowers different shapes and will have contrasting centers.
You can also add grass, sun, hearts, stars.
Spring princess crown
This crown is very easy to make. You will need a piece of thick cardboard for the base (you can use unnecessary packaging). Use a marker to sketch and cut out the base.
To decorate the crown we will use ordinary napkins painted with watercolors. Using PVA glue, cover the crown with colored napkins on both sides.
When the napkins stick and the product is completely dry, you can continue working. For greater expressiveness, the crown should be outlined around the edge with green paint. Then we decorate the crown with multi-colored paper flowers and glue on beads. Volumetric flowers made from folded strips of paper will make our crown even more elegant.
All that remains is to fit the crown on your young princess’s head (you can connect the ends of the cardboard tape using a stapler).
Crown with a large flower
This crown is decorated with only one, but large and very expressive flower.
We make the base of the crown from green paper tapes the same width. We cover the child's head with them, and then form a crosshair so that the crown does not slide onto the forehead.
We cut out the flower petals, make cuts on each of them and lightly pinch them to give the petals a curved shape. Then we attach them to the base of the flower, cut from darker paper. Using a dark green pencil, add lines at the base of each petal to give them an even more natural look.
We make the core of the flower from pieces of yellow napkin rolled into lumps, and the stamens from wires with beads attached to their ends.