Washing vacuum cleaner application. Washing vacuum cleaner Thomas: features, overview of models and customer reviews
If you don't know how to use a washing vacuum cleaner, don't worry. Most models have a similar device, so you can easily deal with your miracle assistant. You only need to learn the basic principles of your model and buy the right detergent. And then the matter is small: assemble the apparatus, pour water and forward - to perfect cleanliness! And we will help you.
Principles and procedure
The principle of operation of any washing vacuum cleaner is very simple: clean water, to which a special agent has been added, is sprayed over the surface (the smaller the drops, the better), and then collected in a tank along with debris and dust. After cleaning, carpets and upholstered furniture may remain damp, so they must be thoroughly dried. Some models manage to leave behind very little moisture, so the floors dry out very quickly.
All such devices also have a dry cleaning function, when dust is collected in a paper bag or in a water filter. Therefore, if you do not want to wash the floors today, it is not necessary to use all the capabilities of your miracle assistant.
Wet cleaning procedure:
- Before using your vacuum cleaner at home, make sure your carpet or hard floor is water-resistant and can handle household chemicals well. To do this, in an inconspicuous corner of the room (for example, behind the sofa), pour some water on the floor, adding the detergent you are going to use to it. Wipe the area with a clean rag. If traces of paint appear on it or the floor is deformed, you cannot use a washing vacuum cleaner with this solution.
- Assemble your model according to the instructions.
- Add the right amount of detergent to the water and pour the mixture into the tank.
- It is advisable to pre-soak a large stain in the solution for a quarter of an hour.
- If your product foams a lot, it is better to add a defoamer to the dirty water tank, otherwise excess foam may enter the turbine.
- Turn on the vacuum cleaner to the maximum power for your model.
- Start wet cleaning from the far corner of the room. Draw overlapping lines to better wash the surface.
- After cleaning the floor with a detergent, remove its residues with clean water. To do this, pour warm water into the tank and repeat washing the surface.
- Walk the floor with the suction nozzle several times to dry the floor.
- Disassemble the appliance, wash all parts and lay them out to dry.
- Dry carpets or upholstered furniture thoroughly. To do this, you can briefly open all the windows in the room.
It is advisable to use household chemicals of the same brand as your vacuum cleaner. So you can be sure that it is suitable for your model. For example, a Zelmer vacuum cleaner comes with a special shampoo for carpets.
But you can also use universal solutions if you first test them on an inconspicuous part of the carpet.
Using a Zelmer washing vacuum cleaner
Consider the principles of operation of washing vacuum cleaners using the Zelmer brand as an example. Any model usually comes with instructions in Russian, after studying which you can easily wash any surface.
Preparing the Zelmer vacuum cleaner for work:
- pour the desired solution into the opening of the detergent container;
- put it in place;
- pour water into the container and insert it into a special hole;
- connect one end of the flexible hose with the hole to the container, and the other end to the suction pipe;
- put a spray nozzle on the pipe (all nozzles are in a special compartment on the device body);
- connect the end of the Zelmer liquid hose to the suction pipe using special holders;
- Gently pull the cord by the plug and remove it.
Your Zelmer vacuum cleaner is ready to go. Now you can use it for wet cleaning:
- insert the plug into the socket;
- set the desired power (by default, the average suction power will turn on, while three indicators will light up);
- turn on the Zelmer vacuum cleaner;
- press the water supply button on the handle;
- treat the desired surface several times.
Change the water in the container periodically. Be careful not to overturn the appliance during cleaning.
By constantly pressing and releasing the button on the Zelmer handle, you can control the flow of cleaning solution into the sprayer. If you want the water to flow continuously, just press the button and move it back a little. Try not to treat the same place for a long time, so as not to wet the base of the carpet.
After cleaning one area, change the vacuum cleaner nozzle to a suction brush and dry the surface thoroughly. Move the brush back and forth until the carpet is dry. Then change the nozzle again and proceed to the new part of the carpet. After cleaning, disassemble the Zelmer vacuum cleaner and wash all its parts.
As you can see, there is nothing difficult in wet cleaning with a washing vacuum cleaner. Now you can always keep your apartment clean using all the strength and power of your new assistant.
A conventional vacuum cleaner is not enough for a full cleaning of the room and carpet cleaning. Its application has always been considered as a preliminary step before wet cleaning, which was previously done by hand.
Since the advent of washing models, it has become possible to combine these two steps and make wet cleaning quick and easy. At the same time, you need to know how to use a washing vacuum cleaner in order to fully realize all the advantages of this household appliance.
Washing vacuum cleaners are not limited to basic functions. In addition to dry and deep wet cleaning with detergent, some models can:
- clean up large debris;
- collect liquid from the floor, other surfaces;
- clean tiles, glass, linoleum, stone, furniture from dirt;
- perform humidification, aromatization of the room;
- clear clogged tubs and sinks.
With these options, you can carry out a thorough cleaning. The most popular among washing vacuum cleaners are German household appliances Thomas and Polish Zelmer.
Examples of multifunctional models:
- Thomas Twin Tiger with wet dust filtration, equipped with the functions of dry and wet cleaning, liquid cleaning.
- Zelmer 919.0ST the same device in terms of the set of functions, a set of nozzles which allows you to work with soft, fleecy, stone, marble, parquet surfaces.
Technical solution
The main disadvantage of conventional dust collectors is the release of fine dust through the outlet, which then settles in the room. In the washing version, this is eliminated by the presence of two chambers with clean and dirty water.
From the first, under pressure, water is sprayed over the surface. In the second, waste moisture is collected along with dust and dirt. To improve the cleaning properties, detergents are added to the chamber with clean water. Usually the manufacturer recommends homemade detergents. For example:
- Thomas ProTex V recommended for waterproof floor coverings, furniture upholstery.
- Thomas ProFloor designed for cleaning ceramics, PVC, and other similar coatings.
Depending on the location of the parts, the washing machines have a vertical or horizontal design.
An example of an upright vacuum cleaner - Zelmer ZVC026XX. Horizontal arrangement of mechanisms at Zelmer ZVC763HPRU with water filter. German manufacturer Thomas has similar models - vertical Thomas Prestige 20S Aquafilter, horizontal Thomas Twin Tiger. Both models have water filtration.
Preparation for work
Before the first use, it is necessary to carry out an external inspection for the presence of faults, check the complete set. In their absence, you can start preparing for operation. To do this, the vacuum cleaner must be disassembled in the following sequence:
- Get containers.
- Pour clean water into the dirt collection tank.
- Add detergent according to the manufacturer's recommendation.
After that, assemble the device in reverse order and connect attachments:
- Install the desired nozzle on the tube.
- Connect it to the hose.
- Insert the hose into the appropriate socket on the housing.
- Unwind the cord, connect it to the network.
When working with a vacuum cleaner that has a water filter, you also need to check the presence of clean fine cleaning modules, check the aqua filter itself, and when using shampoo, add a defoamer and splash protection to the waste water container.
Cleaning
To achieve the most effective result, follow the recommendations that will make restoring order faster and more comfortable:
- For dry sand or other similar debris, it is best to use the dry cleaning function using the turbo brush attachment.
- It is advisable to clean carpets with successive up / down movements in the direction of the pile.
- It is worth starting work from the corner farthest from the entrance, approaching the door.
- After the initial cleaning, it is recommended to re-clean with clean water.
- You can speed up the drying of the cleaned surface by drying in the collection mode.
Care after application
After cleaning, the device must be washed. Proper maintenance will ensure proper safety and performance, help to avoid the appearance of unpleasant odors and mold inside the case.
For this you need:
- Disconnect the device from the network.
- Dismantle attachments.
- Open the lid, remove the containers.
- Drain dirty water.
- Rinse and dry tanks.
- Collect the vacuum cleaner and store it until the next cleaning.
Features of work
Most often in stores you can find washing vacuum cleaners from Zelmer and Thomas. All such devices have aqua filters that reliably hold fine dust inside, mixing it with water.
Thomas
Some German models have a wet filtration system with an injector, which includes a water filter module, a porous element included in it, and an aqua atomizer suction cube.
Before wet cleaning, the aquafiltration system must be brought into working position. For this:
- in the main compartment you need to insert a container to collect dirty water;
- install the water filter, holding the cover;
- install a block with a porous element and a suction cube;
- Pour clean water into the dirt collector.
You also need to make sure that the atomizer is functioning.
After cleaning, the Thomas filtration system must be dismantled. Elements of the filter, injection, tank should be washed and dried. Thoroughly wipe the working compartment with a dry cloth, and clean the cover from dirt.
Zelmer
Before cleaning, vacuum cleaners from this manufacturer require special preparation of the filter device module:
- a partition should be installed in the dust collector chamber, the blinds of which should be directed downwards;
- then you need to pour water into the container;
- at the end of the preparation, it remains to install the wet cleaning module itself.
After use, the filter with a baffle must be removed, washed, dried and reinstalled. After 30 hours of operation, the Zelmer water filter needs to be replaced.
The complexity of the design of Thomas machines equipped with a water filter requires time for post-harvest maintenance. This makes you approach cleaning more thoroughly. When choosing a model, consider this parameter.
The washing vacuum cleaner is a universal tool for dry and wet cleaning. Such a device effectively cleans various surfaces from dirt and dust, including soft and wooden ones. It removes stains and debris in a short time, washes floors, furniture and even humidifies the air. The washing vacuum cleaner removes dirt without streaks and dries the surface after washing in a matter of minutes.
With the listed functions and tasks, a standard vacuum cleaner will not cope. Washing equipment is indispensable for cleaning carpets with long pile. It will eliminate the accumulated dust and at the same time preserve the texture of the product. Let's look at how to use a washing vacuum cleaner correctly.
Principle of operation and functioning
The washing vacuum cleaner includes two tanks, one of which is designed for clean water with cleaning agent, and the second for collecting dirty water. Before starting work, water and detergent are poured into the compartment. When the device is started, water and the product are mixed, the solution moves through the hose and is distributed over the surface through the sprayer due to pressure.
The detergent composition wets and washes contaminated objects, eliminates dirt and dust. After that, dirty water is sucked back into the vacuum cleaner, into the second tank. Washing occurs evenly, and the cleaned surfaces dry in a matter of minutes. This is how a washing vacuum cleaner works.
The kit comes with several nozzles that are suitable for different surfaces. These are special brushes for dry and wet cleaning of floors, for wet cleaning of carpets, for cleaning furniture and glasses. Some firms, such as Thomas, even offer a plumbing plunger.
In addition, you can find models with special anti-static brushes for cleaning TVs, computers and other equipment.
Nozzles in the form of brushes are great for blinds and roller blinds, soft foam nozzles for polished surfaces, turbo brushes for upholstered furniture, special strips for easy cleaning of floors under cabinets, beds, sofas and armchairs.
On many models, you can adjust the power of work and the amount of water that is supplied to the surface to be cleaned. In this case, for carpets, furniture and other soft surfaces, the maximum power is selected so that the material does not have time to get wet. After such processing, such products are dried only in the fresh air.
How to prepare the vacuum cleaner for work
- Before using the device, be sure to read the instructions and select the appropriate cleaning agent;
- Water is poured into the tank, where detergent of the required dosage is then added;
- One end of the liquid tube is connected to the spray pad, the other end to the telescopic tube;
- The hose is connected to a tube to which a nozzle is already attached;
- The hose is inserted into the device, the cord is pulled out and plugged into the outlet;
- Select the appropriate mode and press the power button;
- In a washing vacuum cleaner with a filter, you need to check the presence and cleanliness of the latter. In addition, a defoamer must be added to the dirty water tank.
What means for washing vacuum cleaner to choose
Before using a washing vacuum cleaner, you need to determine which products can be used. You can choose a universal preparation that is suitable for cleaning various surfaces, for rooms and car interiors. It should be a quality product with low foaming.
The German company Thomas produces reliable and safe equipment of high quality. Today, in almost any store you can see washing vacuum cleaners from this manufacturer, which are able to clean everything from ordinary floors and carpets to mirrors, windows and curtains. The units will wash not only horizontal, but also vertical surfaces. According to numerous reviews, buyers are satisfied with the excellent, simple, reliable and long-lasting work with the Thomas aqua filter.
In contact with
Classmates
How to use Thomas washing vacuum cleaners?
Thomas multifunction devices are easy to clean, easy to operate and easy to manoeuvre. They have convenient rubberized buttons to turn on the unit and a long cord that allows you to clean large areas without changing sockets.
There are two types of vacuum cleaners with an aquafilter:
- Cylindrical - these are devices in which the clean water tank is located inside the housing. To change the water, you must first de-energize the device, after which you can pull out the container.
- Horizontal units have water tanks that are attached to the back of the hull. These types of vacuum cleaners do not need to be disconnected from the mains when changing water. Simply remove the tank and change the water in it.
A special water pump and two containers are built into devices with an aquafilter. Into one pure water is poured, and the second one is going to be dirty. An aquabox acts as a filter, which is able to perform its functions only if water is poured into it.
Despite the fact that vacuum cleaners are called washing, they also do an excellent job with dry cleaning, as evidenced by the reviews of the Thomas units. Before starting work, it is enough to fill the aquabox with water up to the minimum mark. Change the fluid in the tank recommended after cleaning each room.
During wet cleaning when washing floors and cleaning carpets, the surface is wetted with clean water under pressure, which is instantly sucked back together with dirt.
The Thomas washing vacuum cleaner is able to clean carpets with high quality even with a lot of pile. A special nozzle is used for such cleaning, through which a washing solution under pressure penetrates through the pile and cleans it.
Before using the machine it must first be properly assembled. First, a transparent tank is filled with water up to a certain mark, into which two caps of a special detergent are poured. After that, the container is installed in its place and fixed.
The kit includes special nozzles that are suitable for washing smooth surfaces or carpets, for collecting water from the surface and drying the floor. By adding a special concentrate to the tank, and putting on the necessary nozzle, you can clean stains from carpet, upholstered furniture, carpets and even heavy curtains.
Cleaning with the Thomas machine is very gentle. It can be used to wash and clean not only painted surfaces, glass, linoleum and tiles, but also water-sensitive and parquet.
Assembling a vacuum cleaner with aquafilter
Manufacturers of Thomas equipment produce a large number of models of vacuum cleaners with an aqua filter. Almost every model on the Internet you can find a lot of reviews, most of which are positive.
Twin TT Aquafilter
Clean and safe cleaning device suitable for allergy sufferers. After using this model, the air in the room becomes fresh. Its characteristics include:
- equipped with a power regulator;
- equipped with a HEPA filter;
- equipped with nozzles for washing tiles, furniture, parquet and carpet cleaning;
- has a suction power of 300 W;
- designed for wet and dry cleaning.
When washing floors with Twin TT Aquafilter, the surrounding surfaces and objects will not be splashed with water, since the device is equipped with a splash guard.
Twin T1
Premium household appliances has a complete water filter and at the same time compact size. Designed for both wet and dry cleaning, the model is equipped with:
- nozzles for floor and carpet, parquet, furniture;
- dust collector with a volume of 2.4 liters.
Thanks to the two-stage turbine, you can easily, quickly and efficiently wash the room. Even allergy sufferers can use this simple, maneuverable and light model.
Thomas Twin T2
Multifunctional model with aquafilter equipped with a powerful water pump. With the help of special adjustments located on the handle of the hose, you can adjust the amount of water supplied at your discretion. Unit characteristics:
- equipped with a power regulator;
- designed for cleaning carpets, furniture and washing walls, floors, windows;
- suction power - 230 W;
- The volume of the dust collector is five liters.
Using Thomas Twin T2 you can clean both horizontal and vertical surfaces. If you add a special detergent to the water in the aquafilter, the device will even cope with old stains. To collect dust from the parquet and do not soak the coating, you can use a special nozzle.
Model Twin XT
The unit features a compact and stylish body and a unique aquafilter, with which you can easily and effectively clean any surface. The control is carried out by moisture-proof rubberized buttons located on the case. Rubberized rims are put on the large rear wheels of the device, and the front ones are adapted to overcome obstacles that have arisen in the way. In addition, the model is equipped with:
- special nozzles for carpet and floor, furniture and parquet, dust collection;
- removable tank for cleaning solution;
- for dry cleaning.
The network cable for the Twin XT model reaches a length of eight meters, which allows the unit to be used in large rooms without frequent change of sockets.
Vestfalia XT
Compact vacuum cleaner with a filter, the aquabox is easy to use and very practical. The device is equipped with:
- nozzles for floors, furniture, carpets and a turbo brush;
- power regulator;
- dust collector with a volume of 1.7 liters.
The model has a simple diagnostic system and is very popular among consumers.
Black Ocean
The model is able to work as a conventional vacuum cleaner for dry cleaning, and as a washing unit. In addition, with the help of Black Ocean and the aquafilter built into it, dust can be removed from surfaces. The package includes:
- nozzles for hard surfaces, furniture, parquet and animal hair removal;
- carbon filter;
- a four-liter water tank;
- dust collector.
Very few models equipped with a special brush, which is designed to collect animal hair. Thomas Black Ocean is equipped with such a brush, which greatly facilitates cleaning and is suitable for people suffering from allergies.
In addition to the models described above, the German company Thomas produces many more types of washing vacuum cleaners, each of which is able to quickly and efficiently clean all surfaces in the room.
Washing vacuum cleaners belong to a separate category of equipment, which allows not only to carry out wet cleaning of premises, but also to wash windows, clean upholstered furniture. They are simply indispensable where pets, children live, especially in multi-room apartments, cottages, etc.
As you know, certain principles underlie the operation of any technique. Also, this or that technique may have its own characteristics of operation. Therefore, it is necessary to find out for yourself how a washing vacuum cleaner washes, how to properly clean an apartment with it, for which surfaces of the room it is best to use it so that unnecessary problems do not arise. It is also important to know which surfaces are generally forbidden to clean with a washing vacuum cleaner.
Principle of operation
Usually, all washing vacuum cleaners have two containers, one of which is filled with water immediately before cleaning. During operation, water from the tank through the hose enters under pressure into the nozzle and is evenly distributed over the desired area of the surface, which should be cleaned. Then the same, but dirty water is returned back to the vacuum cleaner, getting into the second container through special channels. This is the principle of operation of the washing vacuum cleaner.
It should also be noted that this technique in most cases cleans the air well with the help of a specially provided filter, sometimes even more than one.
Operation features
Some indoor surfaces do not like moisture, so they should not be cleaned with a washing vacuum cleaner. These are parquet, laminate (without special coating), carpet. This is explained by the fact that water can enter the space between the boards and the junction of the parts of the coating. Gradually, the material will soften and deteriorate. Therefore, before figuring out how a washing vacuum cleaner works, you should pay attention to the nature of the surfaces on which it will be used.
The following should also be added: tiles, latex carpets, stone floors, textiles can be cleaned well with a washing vacuum cleaner.
Room cleaning
Before you start cleaning, you must assemble the vacuum cleaner according to the manufacturer's instructions. Next, you need to pour water into one of the reservoirs of the vacuum cleaner. You can add water with recommended detergent. Then, if it is a carpet, you should first vacuum it without using water to remove most of the dirt. And then the turn will come for such an important action as the work of a washing vacuum cleaner. It is used for wet cleaning of the carpet or other surface. After cleaning, it is necessary to dry everything that was vacuumed.
If it is necessary to clean upholstered furniture, then you should put the appropriate nozzle and select the minimum water supply mode.