Volumetric heart made of ribbons. DIY heart made of satin ribbons How to make a heart with flowers from ribbons
You don’t need a reason or means to express your feelings. However, often you really want to please your loved ones with some kind of gift. An easy-to-make, delicate, airy heart made from satin ribbons can be a wonderful hand-made valentine. I was inspired to create it by a heart made of fresh roses.
Materials and tools used to make the heart:
- hot pink satin ribbon (5 cm wide, 4.10 m long)
- pale pink satin ribbon (5 cm wide, 3 m long)
- pale pink satin ribbon for decoration (1 cm wide, 0.5 m long)
- beads for pearls
- matching threads
- scissors
Cut the hot pink and soft pink ribbons into 15 cm long pieces. Each piece of ribbon will be a separate flower.
To form a flower, you need to fold the pieces of ribbon in half along the long side, sweep one side seam and the ends of the ribbon, then pull it off.
Then you should slightly correct the resulting flower, make the petals open and secure it with a thread and a needle.
After the required number of flowers have been made (28 hot pink and 20 soft pink), we sew them together in pairs. You get bows. From these we will collect a Valentine's heart.
We form a heart from bows. We carefully place the soft pink bows in the middle, and the bright pink ones on the sides. We sew the bows together through the middle and secure with threads.
We decorate the sides of the heart with a narrow pale pink ribbon.
We sew a loop from the remnants of the ribbon so that the heart can be hung.
Decorate decorative tape pearl beads. Our beautiful heart is ready!
January is already coming to an end and soon the beloved holiday of lovers, “Valentine’s Day,” will come. One of the symbols of this holiday is, of course, the heart. On this occasion, I present to you a master class on hanging DIY satin ribbon hearts, which you can give to your other half. It can also be used as home decoration and thereby create a romantic atmosphere.
To create a heart from satin ribbons we will need the following materials:
- thick cardboard;
- pencil;
- scissors;
- stationery knife;
- pink satin ribbon 2 cm wide;
- thin pink satin ribbon 0.6 cm wide;
- white flowers;
- pink roses;
- white mother-of-pearl bead halves;
- lighter;
- glue gun;
- threads with a needle.
How to make a heart from satin ribbons with your own hands?
Draw a heart on a piece of cardboard with a pencil. To make it clearer what size you should get it, we enclose it in a square whose sides are 12 cm.
Cut out the heart with a stationery knife. Be sure to place the cardboard on some kind of support (for example, a wooden plank) so as not to damage the surface of the table.
Take a pink satin ribbon 2 cm wide and use a glue gun to glue one edge of the ribbon to the cut out heart. We wrap it completely with tape, then trim the edge and fix it with glue.
We attach white flowers on top. In this case, they are on a wire, with which you can attach them to the heart. If you have other flowers, then glue them with glue.
We divide the thin satin ribbon into five pieces, each 16 cm long. Next, cut another piece of ribbon 25 cm long, fold it in half and tie it to form a loop. We process all edges with a lighter.
First we tie a loop to the top of the heart in the middle, tying the edges with a bow. We also tie the remaining ribbons into bows, distributing them throughout the heart (the distance between the ribbons is approximately 2.5 cm).
We divide a pink satin ribbon 2 cm wide into pieces 10 cm long. To work, you will need 12 such pieces. We process the edges with a lighter so that the fabric does not crumble.
Fold the piece in half widthwise and sew along the edge with a basting stitch.
We tighten the ribbon with an accordion so that it takes the shape of a flower.
and sew the free edges together.
Glue the resulting ribbon flowers onto the heart.
Glue roses on top of the flowers, alternating
and halves of beads.
So the DIY heart made from satin ribbons is ready!!!
In conclusion, I want to wish everyone love and happiness!!!
Volumetric hearts from satin ribbons for Valentine's Day. Two detailed master classMaster class volumetric heart made of roses.
To make roses, we need ribbons 4cm wide: satin (red and white), from shiny organza (red and white).5.Let's make roses with the following combination of ribbons:
White satin ribbon + white organza, 14-16 pcs. roses;
White satin ribbon + red satin ribbon, 14-16 pcs. roses;
White organza + red organza, 10-12 pcs. roses;
Red satin ribbon + red organza, 5-6 pcs. roses;6.
The next step is to make a base on which we will attach (assemble our roses). The base will be a three-dimensional heart made of cardboard7.
Master class: Volumetric heart made of cardboard.
First we need to prepare templates from which, in the future, we will cut out the elements of our heart. We make the template according to the diagram (see photo below), you need to prepare 4-5 templates for each level (one template each). When making a middle-level template (this is the largest template), use a square with sides of 10cm or 9cm as the base (see photo), then each new level will be 0.5-0.7cm smaller.8.
After preparing the templates, we begin cutting out the parts. For each template we need to cut out two parts, in the end we will get 8-10 parts.9.
So, all the details of our volumetric heart are cut out and ready. Let's start assembly.10.
First we glue two large parts together, then we glue the parts on both sides, folding them in order of decreasing size, see photo above.
Next, we need to smooth out the gradation of our model, for which our model needs to be tightly wrapped with ordinary tape in several layers until the gradation is completely leveled. Also, instead of adhesive tape, you can use strips of paper, first smooth out the gradation of the model with your hands, then you can paste it over with paper.11.
So our model is ready, and, the final touch, in order for us to be able to use the cardboard heart we made in the future, we should cover it with paper tape.12.
The heart is ready. This bulk base can be used to make various crafts. Lovers of bead weaving, we do not recommend passing by such original master class. When you see him, you will definitely have interesting ideas. In general, all needlewomen will be able to prepare themselves magnificent preparations for the upcoming Valentine's Day holiday. A heart made with your own hands will become a gift that better than words will talk about the feelings of the donor.13.
Master class roses from ribbons
Our original roses will be made from two strips of ribbon different colors or the same color, but different shades, at your choice. The MK uses white and gold ribbon 4cm wide and 35-40cm long, that is, the length of the ribbon is = 10*the width of the ribbon. The width and length of the ribbons can be varied, as a result of which you can get many different roses from ribbons, for example, if the length is shorter than half the above length (ribbon length = 10 * ribbon width), then we will get a rosebud, and if longer, then a fully open rose flower (see photo of options at the bottom of the article). 14.
Place the ribbons together, right sides up, and use a lighter to align the edges of the ribbons.15.
Bend the bent part of the tape in half along the width of the tape. The bend should be slightly angled, as shown in the photo above. Next, fold the edge folded in half, aligning it along the top of the bend.17.
Not reaching the edge of the bend by about 1 -1.5 cm, we bend outward. The bending angle is approximately within the range of 20-45 degrees; by varying the bending angle of the petal, you can achieve different effects.18.
And the last step is to secure the end of the tape. The end of the ribbon can be secured with a needle and thread or, as I did, with a lighter, depending on your preference.21.
As mentioned above, varying the length and width of the tape, as well as the bending angle of the petals22.
Let's proceed directly to assembling a volumetric heart from roses.24.
Let's start gluing our roses (white roses) in the middle of the volume, as if dividing our model into two parts, see photos above and below.26.
After we have completely pasted the middle of the model in a circle (photo above), we proceed to gluing next row roses.27.
After finishing gluing the second row, we start a new row and glue red and white organza roses, photo below.28.
And the last row, red roses made of organza and satin ribbon.
So we collected half of our heart from roses. Let's turn the model over and continue gluing the roses, as described above from the second row.
After finishing gluing the roses, we add completeness. Let's make a scattering of pearls by gluing white beads in different places. And finally, let's add a lush bow, which will give our gift an elegant look.29.
Valentine's Day is a great occasion to say kind words love among the winter blizzard and cold. A large gift with delicate flowers made from satin ribbon can be a bright gift. You can make it with your own hands, because with detailed instructions from the site “ZnayKak.ru” it will be very simple.
Scroll necessary materials:
- foam heart figure;
- red satin ribbon;
- needle with red thread, iron;
- glue gun, scissors.
Master class on making a scarlet heart:
Step 1. You will need a satin ribbon 7 cm wide. If you don’t have one, then you can replace it with red fabric. In this case, cut it into strips 7 cm wide.
Cut the ribbon 40 cm long. The satin ribbon, like the material, has a front and back side. You need to roll the strip lengthwise. In this case, the front part of the tape should be on top (it is more shiny). To ensure that the workpiece holds its shape, iron the fold line.
Step 2. Sew the free sides of the tape with the seam facing forward. Pull the material together as you sew. If this is not done, then the flower’s petals will not be voluminous. You will get something like this.
Step 3. The stitched strip must be rolled into a bud. Try to twist the lower part (the one that is sewn) as tightly as possible, and straighten the upper part of the workpiece (along the fold line) in the form of petals. To prevent the bud from opening, secure the tapes every 2-3 cm with hot glue.
Sew the flower from the bottom and pull the thread. This will open the bud even more.
Step 4. Make all the ribbon flowers in a similar way. You can use not only red for the buds, but also “dilute” it with pink or burgundy. The number of blanks will depend on the size of the foam base.
Step 5. Glue the finished flowers onto the foam. First place the blanks in the center of the heart, then glue on the sides. Try to place the buds close to each other so that the base is not visible.
If you don't have foam, you can use cardboard. But on top of the cardboard heart you need to make semicircular sides 4 cm high. Glue them from plain paper and leave to dry.
Step 6. Attach the ribbon in the form of a loop on the reverse side.
Lena Novikova
Master class on the topic:
"Heart for loved ones".
So, to work we will be required:
1. Red cardboard, a sheet of white paper,
2. Scissors, glue gun, wire cutters,
3. Artificial flowers, beads, hearts,
4. Copper wire 2 pieces 50cm each.
5. Satin ribbons white and red.
First, cut out a template from white paper and transfer it to red cardboard 3 times.
Cut out three heart.
We fold hearts in half, red side inward.
We put the wire together and bend it in half. We twist the middle of the wire, leaving a loop for tapes.
The result was a blank similar to umbrella: there is a loop on top and four “antennae” - ribs.
Wrap three wire tendrils in white satin ribbon, and glue it at the end so that it doesn’t unravel.
Hearts glue them together like a triangular lantern, passing a bare wire through the center. Antennae wrapped tape, direct between the red ribs heart. We twist all the wires together into one bundle. We bite off the excess wire with wire cutters, and on one, we string a bead and secure it.
Glue on the ribs heart beads or hearts.
(Note: If you do not wrap the wire tendrils tape, you can string beads on them.)
Decorating the top of the head heart artificial flowers ribbons, beads.