Original DIY hats for children. How to make a paper hat - instructions
A hat made from paper yourself can be a great addition. children's costume for a holiday at school or just a favorite hobby for teenagers and adults. This craft does not require any special additional materials, and is also easy to implement, accessible even to someone who has never done origami or making other paper things before.
In addition, there is several types of making a hat out of paper, which allows you to choose the shape and instructions, which is ideal for you. A hat can be folded even from an unnecessary newspaper in a matter of minutes, so you can try yourself in this venture immediately after finishing reading the article.
So, how to make a paper hat correctly and what else is needed for this?
First, let's consider the option from a newspaper, which absolutely everyone can do and does not take much time.
The advantage of newspaper as a material for a hat is that It is quite large in size and also folds easily, unlike other thick papers. They do it more often paper hat for boys, it is needed for fishing or a picnic (diagram below).
The first thing you need to do is lay out a whole sheet of newspaper (two pages) on the table. Then roll it along the existing fold, and then fold it in half so that you get a rectangle. This is necessary so that another even fold appears in the middle of the page.
It will come in handy later when you need to bend one corner exactly to the middle to form an unfinished triangle. The second upper corner is folded in the same way.
Here are 2 options for how to fold a newspaper:
So we have two diagonal cuts. Now you can bend the bottom edge by 5-7 centimeters.
Important! Please note that only one edge is folded at this stage, that is, the end of one of the two folded pages. If you make a mistake at this stage, the whole craft will be ruined and you will have to waste time and a new sheet of newspaper to redo everything from the very beginning.
The second end is bent in the same way, but from the opposite side. It is important to ensure that they are bent at the same distance, otherwise the hat will turn out disproportionate and ugly.
When these manipulations are completed, you can tuck the lower ends from the edges, also by 5-7 centimeters. It is best to secure them with tape so that the hat does not fall apart immediately after you unroll it.
At this point the work is completed, the hat can be unfolded and put on the head. The original thing is ready!
From paper
If you want the craft to be more durable and also more believable, then you can make a hat with a paper brim. Children will surely like it, and they will want to quickly go for a walk in it.
Despite the fact that the technology here is a little more complex, it does not require additional materials and is quite doable if you strictly follow all the instructions.
You need to fold a regular square from a sheet of paper. Then it is folded diagonally and in half twice to apply the necessary markings that will be needed for further actions.
After this, you need to return the paper to the state of a square folded in half. The edges are folded inward without connecting the folds along the edges. After this, the folds are opened and pressed for the most satisfactory result.
All that remains is to turn the craft over and bend the edges, and then the sides towards you, using the markings that were prepared in advance.
Important! Such a hat can be made from newspaper, the material does not matter. Even cardboard will do, but keep in mind that it is more difficult to fold.
With visor
Surely many will be interested in how to make a hat with a visor, that is, a real cap. It will come in handy on a hot day, when there is nothing else at hand that could protect your eyes and head from the sun, and it will not take much time to complete.
A sheet of paper or newspaper needs to be folded along the “closed” corners, turning the bottom edge out twice. On the other side, special corners are made that will fix the current position of the paper, after which the planes should be bent towards you, taking into account the size of the future cap.
Important! When making any hat, you need to be careful with the dimensions - of course, if it’s just a hobby, then nothing bad will happen if the product is too small or large. When a hat is made for a child to play with, he can be extremely upset by the fact that the cap does not fit on his head. Instead of redoing the thing, you can immediately calculate the parameters, at least by eye.
The lower end now needs to be bent along the edges, and from it to form peculiar double corners, which are subsequently wrapped inside the craft. Turn the future hat over and fold the larger corner to the bottom edge, tucking it behind the “side”, like the side corners.
After this, you can straighten the original hat with a visor and put it on your head, forgetting about the harmful sunlight.
From cardboard
Cardboard is a very dense material, so you can make a real top hat out of it, which will not lose its shape and will become a great gift for a child.
For this model you will need several additional tools: wire, glue, scissors and, if desired, decorative elements - beads, ribbons or something else.
It will be very important to measure your head circumference in advance, because cardboard will not be able to stretch like newspaper.
On the cardboard you need to draw a circle equal to the diameter of the head circumference, and also cut the wire of the same size. Stepping back a few centimeters from the circle, draw the brim for the future hat. A rectangle of cardboard is made according to the size of the smaller circle, which is then bent into a circle and secured with glue or a glue gun.
A small circle needs to be glued to the top of this resulting circle.
A unique frame for the hat is ready, you can leave it just like that or cover it with fabric and add a few decorative details.
This hat looks believable and beautiful, so it will be useful not only for children's games, but also for various masquerades or even crafts competitions.
Corrugated paper
Another fancy option - This sports hat made from corrugated paper. First, the sheet of paper is folded in half, and then smoothed out again, after which a strip of non-liquid glue is applied under the fold. Place a strip of cardboard or any thick paper on it so that a little corrugated paper remains at the edges. These edges need to be folded over the sides of the tape and glued to it.
Next, you will need to cut a small strip from another sheet of crepe paper and apply another bead of glue to the edge. It is glued to the first sheet so that the edge of the base coincides with the edge of the tape on which there is no glue. The bottom edge of the first sheet is folded over and another strip of paper is glued to it. Then a kind of fringe is formed with scissors.
Now A fold is made along the bottom edge of the product - the edge is folded up. In the area of this fold, it is carefully glued or fastened with a stapler. After this, you need to put the hat on your head, and gather the upper part into a bun and secure it - grab it with a cord, and fluff the fringe. Decorating elements can be added upon request. The hat is ready!
Now you know many ways to make a paper hat to suit every taste and skill level.
You will find the answer to this question by studying this master.
Master class on making a headdress “Hat for a clown”
Good afternoon, dear teachers!
Today I want to present to your attention a master class on making a headdress.
I work at the House of Culture, and we try to make our own costumes for performing on stage. We use not only dresses, but also, of course, hats, which you can also make with your own hands. I really like coming up with hats and then turning them into reality. You can also make such beauty and use it at various matinees, holidays, performances, etc.
I want to show you a few of my hats, take a look and rate them.
Musketeer hats
I sewed these hats for waltz
Hats for performing in plays:
blue sea
Flower meadow.
5. There are, of course, crowns.
I want to ask you - “What is the most interesting, cheerful and kind character at children's parties?”
That's right - a clown. Let us together make a headdress for our clown, as they say, we will complement the costume with an original hat.
First, we need to decide what we need for making the following item:
Whatman paper or hard cardboard,
PVA glue, but it’s better to take Moment glue
Scissors,
Pencil,
Ruler,
Compass,
Fabric of any color (you can use satin, lining, arganza and nylon).
So we have everything prepared, let's start making the hat.
1. The first stage of our work, we must decide how tall our hat will be. I suggest making the hat in the form of a cylinder. So, take a ruler and a pencil, draw a strip with a height of 19 cm and a length of 61 cm. Cut it out using scissors.
2. Now take a compass and draw 2 large circles with a diameter of 12 cm - these are the brims of the hat
and 1 small circle with a diameter of 6.5 cm is the top of the hat.
And cut it out.
4. Then we glue the strip and the small circle together, starting from any side, as convenient for you, and then we glue the two large circles.
Don’t think that paper can only be used to make ordinary crafts or toys. You can find many approaches to working with this material. Today we will look at a useful topic on how to make a hat out of paper without a lot of time and with a minimum of effort.
Painter's hat made from newspaper
This is a product familiar from childhood. Externally, this hat resembles a pirates’ cocked hat. It is quite possible that when you learn how to make a hat from painter's paper, you will put in a little effort, bring it to perfection and make it the main attribute of a pirate carnival costume.
Let's get back to the main purpose of this hat. Why is a hat classified as painting work? In the process of decorating indoors or outdoors, dyes can get on your hair; if you don’t have a special hat, then this will do just fine. You will give a second life old newspaper, and it’s not such a shame to throw away the product after use.
Are you convinced of the usefulness of this product? Let's learn how to make a painter's paper hat. For work you will need a sheet of newspaper, choose a larger size. A1 format is ideal.
Stages of work:
That's all the instructions on how to make a painter's hat out of paper. You can try on the finished product. The work is simple and takes a few minutes, and even less with experience.
Carnival hat cylinder made of cardboard
Is carnival coming soon? Will your child be dressed as a magician or a gentleman from London? Or maybe she will be a real lady who cannot go out without an elegant miniature hat? Then you definitely need to learn how to make a cylinder hat out of paper. Of course, plain paper will not work for this job. The material should be denser, it is better to use cardboard.
What else is needed for this job:
- the main material (cardboard) is selected according to the theme of the future costume;
- pencil for making marks;
- adhesive tape;
- fleece;
- To create a beautiful shimmer, use varnish and a wide brush.
Before you make a paper hat with your own hands according to the instructions, you need to prepare for the upcoming work. It is impossible to make a top hat without measurements, of course, unless it is a miniature hat to decorate your hairstyle.
You are required to:
- measure the circumference of the child’s head with a sewing meter;
- think about what height of the finished product you need; making a very high cylinder is not recommended, it can cause discomfort when worn.
Now we’ll explain step by step how to make a paper hat with your own hands:
For a spectacular result, coat the cylinder with varnish and leave until completely dry. Now you know how to make a cylinder hat out of paper with your own hands. But this option is suitable for little gentlemen, but what about ladies?
Small elegant top hat for girls
The following site instructions will tell you how to make a paper hat that will decorate any holiday outfit. It is attached to the hairstyle using hairpins or a hoop. This accessory can be used not only by children, but also by adult girls. Such mini cylinders can be a good solution for photo shoots.
Prepare before work:
- thick cardboard;
- glue stick and gun;
- ruler;
- corrugated paper;
- paper for working using the quilling method;
- braid;
- scissors.
Before manufacturing, as in the previous version of the cylinder, we need to decide on the dimensions. There is no need to measure the circumference of the child’s head; the work can be done “by eye”. For those who are engaged in such creativity for the first time, we recommend using standard sizes, we will indicate them during the work.
And now the instructions on how to make a miniature paper hat:
Externally, the cylinder may seem ready. It needs to be decorated. We use corrugated paper and quilling techniques. After practice, you can indulge in fantasy.
(Step 3)
- We cut out a circle from paper, it should be smaller than the base, and apply it to the cap. We wrap the excess part inside and secure it with core glue. We decorate the top of the mini cylinder with braid;
- We make flowers. Use paper that matches the color of the hat. Use a special stick to twist the strips. Form flowers. Use the same principle to make the leaves. Glue the resulting products to the cylinder.
- To prevent the finished accessory from falling off your head, attach it to a hoop, you can use an elastic band or braid.
This is just an example of work, you can make the product any way you want, with larger or smaller margins and decorated as you wish
Cap in technology
So, you have already learned how to make a hat from painting paper, how to make a carnival top hat. Now let's look at another product that is made using the origami technique - this is a cap.
Such a thing is indispensable both when relaxing in nature and in the country while working under the scorching sun, and children will simply be delighted with such an attribute.
There are several manufacturing options. We will look at each of them.
Classic cap
Let's start with the classic model. To work, you will need a square sheet, preferably a large one. Let's start adding:
- Fold the square into a triangle. We do this at an angle of 45 degrees.
- We turn the workpiece over to face itself with the wide part. Fold the corner located at the top downwards of the formed figure.
- Now the folded corner needs to be raised. Elements located on the sides must be placed on top of each other and pressed to the top of the product. The resulting figure should remind you of a trapezoid.
- Lower one of the parts that is located at the top of the corner side and tuck it under the previously folded layers. Press the workpiece as hard as possible to ensure everything is securely fastened.
- Turn the product over. We fold the remaining part of the corner downwards. We unfold the workpiece from top to bottom. Open the product so that the inside of the cap appears.
- Gently press on the sides of the product to give them shape. We lay the parts on top so that the outline of the cap appears. The corners should “look” at each other.
- At the final stage you need to make a visor. First, fold it up. Then return to the starting position. When performing these steps, leave a few centimeters from the folded line.
Perhaps the instructions on how to make a paper hat using this principle will seem complicated. Not everyone is able to design a product the first time, because the origami technique requires practice. But we are sure that already the second time, you will get an excellent cap, which will take you a few minutes to create in the future.
Square cap
Do you want not just a paper hat, but an original cap? There is nothing simpler, let's design a square cap model. What to do:
- take a sheet of paper, maybe a newspaper;
- fold the sheet to form a triangle, cut off the excess;
- unfold the resulting figure, you should have a line passing through the square;
- fold the workpiece, on the other hand, for the second fold line;
- turn the product upside down;
- We lay each corner downwards;
- turn the product over and repeat the steps;
- if everything was done correctly, you should have a visor, fold it up;
- The last thing you need to do is fold the corners and secure the shape of the cap.
Nothing complicated. Now you are the happy owner of not just a simple, but a homemade paper cap. Using this pattern, even children can be taught to make hats. They will definitely like this kind of work.
Make a hat self made at home will not cause much trouble. In addition, the product can be made from various materials that are in your home.
In children of preschool and school age There are matinees that require special hats. Realizing that buying for one day is expensive and makes no sense, parents use their wits and begin to create masterpieces at home with their own hands.
Cap
You will need:
- Landscape sheets
- A little perseverance and attentiveness
Step by step instructions:
- We take two sheets and lay them on top of each other.
- Their location should be horizontal.
- It is necessary to bend the top edge by about 2-3 cm.
- The right and left edges must be bent so that they touch each other in the center.
- The part of the sheet that remains bends upward.
- We fix the upper part on the sides, on both sides.
- Then we wrap the part of the bottom sheet that remains.
- Straighten the product and the hat is ready.
Cylinder hat
Initially, this causes misunderstanding and panic, but if you approach the process correctly, an excellent result awaits you. We suggest making a hat in the form of a cylinder from cardboard. The first thing you need to do is prepare the tools for the product.
You will need:
- Colored cardboard, the size of the hat will depend on its size.
- Scissors.
- A simple pencil.
- Eraser.
- Compass.
- Glue.
- A bright ribbon will serve as a decoration for a hat.
Step by step instructions:
- We take a cardboard sheet and draw a circle, the diameter of which is proportional to the size of the required cap, from the center of the first circle we make another circle, with a diameter larger than the previous one.
- On another sheet of cardboard we do the same as on the first.
- On this cardboard we draw a smaller circle; it should occupy approximately 3⁄4 of the first circle. We get two circles on a sheet and three on another sheet of cardboard.
- We cut out a circle with a large diameter from the first cardboard, and then make stripes in the form of a fringe up to the first circle.
- Fold the resulting edging inward and set the circle aside.
- From cardboard, cut out a circle with the largest diameter, and then cut out the smallest one located inside.
- Now you make the same fringe, only from a small to a large circle.
- We bend it.
- Cut out the walls of the cylinder from the remaining cardboard. These strips should be the size of the small circle plus a centimeter for gluing.
- We take a sheet with three circles and smooth out its fringe, grease it with glue and lift it up.
- Now you need to put the circle on a cylinder made of cardboard and press them so that they stick together.
- We take a small circle, grease it with glue and put it on the top of the cylinder.
- Give the product some time to dry and start decorating the hat.
- Take the prepared ribbon and tie a bow on it. The type of bow depends on your taste. If the hat is intended for a boy, then using a ribbon you can decorate it by wrapping it around the cylinder and fixing it with glue.
- The hat is ready to use.
Pirate hat
These hats are often necessary for New Year's matinees boys.
You will need:
- Cardboard, preferably black
- Thin album sheets
- Scissors
- Rubber
Step by step instructions:
- Make a square shape from cardboard
- Draw a circle of large diameter on it and cut it out
- We cut strips from album sheets and make fringe from them
- Twist it with scissors
- Glue the fringe you made around the perimeter of the circle.
- We bend the edges of the circle so that there is a triangle and fix them with glue
- Again we take the album sheets and fold them several times, draw a feather and make a fringe along the edges. You need to make two of these feathers
- Glue one feather to the sides of the triangle
- We draw bones, a skull or other pirate emblems on a sheet of paper, cut them out and glue them to the front of the future hat.
- Using paints, pencils or felt-tip pens, we decorate what we have pasted.
- To keep the hat on your head, we thread an elastic band around the edges. The hat is ready
Doll hat
A little girl will really like this activity; the child will be very interested in making a headdress for her doll together with you.
Here you have many options, you can make a hat from a plastic cup, yogurt box or any other mold.
Step by step instructions:
- You need to take a yogurt box and cut it off, leaving only the cone.
- Draw a circle on cardboard with a diameter three times larger than that of the mold.
- Place the mold in the center of the circle, from the inside.
- Now connect the two parts
- What you get needs to be covered with any fabric you like
- Let's start decorating the headdress. You can use anything here (ribbons, rhinestones, beads, etc.). Use your imagination and enjoy the process.
You make a hat for a girl in exactly the same way, only using large molds.
Remember, to make any headdress, it is important to know the size of the head and who will wear it. If you are not lazy and have a little patience, connecting your imagination to the process, you can create masterpieces and proudly tell that you did it with your own hands. By engaging your kids in such activities, you can develop their perseverance and desire to learn.