DIY topiary crafts made from satin ribbons. Ribbon topiary

Being a stylish piece of furniture, topiaries do not lose their popularity. Initially, topiary art was called curly cutting of plants. To complete a particular composition, sometimes it was necessary to work on topiary for several years. Impatient lovers did not want to put up with this. Then a new direction in needlework with the same name appeared. These beautiful trees of happiness are made from the most various materials. Today at Krestik we will look at a master class on making topiary from felt and several options for topiary compositions from satin ribbons, organza and sisal!

Felt topiary “Pink Chrysanthemum”

Materials and tools:

felt (8 sheets measuring 30×28 cm)
sisal (greens)
flowerpot
satin ribbon 1 cm wide
postcard
butterfly on a leg
ladybug
green wool thread
foam ball (diameter 10 cm)
sheet of green paper
stick
mixture of cement and sand (1:1)
glue gun
scissors

Crown

We cut all the felt into strips 7 cm wide.

From each felt strip we make a chrysanthemum.

Using hot glue, we “plant” the resulting flowers on a foam ball, previously pasted over with green paper.

Trunk

For the trunk we use a regular stick from a birch or other tree. We clear it of bark and use a glue gun to wrap it tightly with green woolen thread.

The topiary trunk stick should be dry, and not just broken from the tree!

Assembling a topiary

We plant the crown onto the trunk using hot glue.

Mix a thick cement-sand mortar in a pot and place the topiary in it exactly in the center.

Place a butterfly next to it so it doesn’t fly away)

We fill the surface of the cement with sisal. Leave to dry.

Decoration

A small postcard with nice wishes pierce it with a hole punch. We string it on a satin ribbon and tie an even bow under the tree crown.

We plant a ladybug in the grass.

We put a “Handmade” sticker on the flowerpot.

Our topiary is ready! A handmade tree of happiness will serve as a wonderful gift for family and friends.

Another version of the felt tree of happiness:

The crown for topiary can be made from other equally simple materials: satin ribbons, organza, sisal.

Topiary made from satin ribbons

You can make an exquisite ribbon topiary with your own hands using satin ribbons of various widths and different techniques for working with them.

You can watch the master class in the video lesson.

Organza Topiary

Organza is perhaps the most weightless material. Topiaries with organza flowers always turn out as airy as a cloud.

How to create an aerial topiary, watch the video master class.

There are countless types of modern needlework. So, exciting activity, thanks to which stunning souvenirs are born, is the topiary technique. Miniature flower trees made of iridescent satin will become a great gift colleague, friend or relative.

How to make topiary with your own hands

Today, the technique is used to decorate a room and create souvenirs, but previously this art consisted of giving garden plants clear geometric shapes. This type of needlework has gained particular popularity using satin ribbons, but only for beautiful crafts not enough. Intricate trees and spherical flower arrangements are decorated with beads, buttons, seed beads and other elements, often decorated with pieces of organza or tulle. Craftswomen do not miss the opportunity to experiment, creating new master classes.

The main rule when making topiary is that the proportions of the product should not change depending on the size: for example, the crown of the tree should exceed the size of the workpiece to which the trunk is attached. But the capacity of the container in which your tree will “grow” should not be larger than the average size of the crown. The height of the craft should be such that it is equal to three diameters of the spherical crown. The container for the satin product should be weighted so that the structure does not tip over.

How to make a topiary from ribbons with your own hands with roses

To create a beautiful tree, you need to have the following tools:

decorative pot or cup;
satin ribbons different shades, the width of each should be 2.5 cm;
foam ball;
wire for trunks and ribbons to decorate them;
decorative beads:
glue gun;
a solution of gypsum and water.

A master class that will help every novice craft lover make a tree with their own hands:

Prepare ribbons that will later turn into roses. Cut each into strips 30-40 cm in length, depending on what size flower you want. Burn the edges to make them stronger.
Place the pieces with the smooth side facing you, bend the corners of each, twist, forming a rose. Secure the remaining end with glue at the bottom of the flower.
Attach the finished flowers one by one to the base - a foam ball.
Wrap the wire-trunk with satin fabric, secure it with glue and insert it into a ball with roses.
Fill a decorative pot (or cup) with a mixture of plaster and water, then insert the trunk of a rose tree.
Decorate the container with ribbons, beads, and sprinkle decorative stones on the plaster.

How to make a tree from satin ribbons using the kanzashi technique

The topiary in the shape of a sunflower, which is made using the kanzashi technique, looks original. So, the manufacturing process is as follows:

Take yellow satin fabric, 5 centimeters wide, and cut it into pieces 6-7 centimeters long. There should be about fifty pieces that will serve as leaves and petals.
Bend each of them lengthwise and make a cut on one side, achieving a sharp corner. Turning the ends of the products inside out, glue them together.
Cover the foam base of the ball with coffee beans, imitating sunflower seeds.
The stem of the flower will be a wire inserted into the ball. First, it needs to be covered with green paint, and then covered with material of the same color.
From the junction of the ball with the stem, start gluing the sunflower petals, which were made using the kanzashi technique.
Place plaster of paris in the pot, insert the topiary and fill the remaining space with the same mixture.

Topiary made of organza and satin ribbons

Using these materials, you will create a decorative tree that differs from other topiaries in its chic appearance. Topiary made from satin ribbons, which will complement the interior decor of the house, is very simple to make:

Using scissors, cut 7x7 cm squares from pieces of organza. If you don’t want to measure, then cut by eye.
Place one square on top of another to make a total of six corners. Bend the workpiece in half, and fasten the lower part with a stapler. If there is no tool, the material can be sewn with a needle and thread.
Attach the wire to the ball, it will serve as a barrel.
Dilute the plaster and pour it inside the pot, then insert the wire there.
Forming a crown involves placing artificial organza feathers on glue, and inserting several satin roses between them.
Decorate the craft with beads and lace.

Photo: topiary made from satin ribbons

There are many examples of decorative trees or bouquets. Beautiful photos show how chic topiary made of satin ribbons looks in this technique. The iridescent material combines wonderfully with beads, sequins, butterflies, and pieces of organza. Beautiful trees will be a chic decoration for a coffee table or desk.

Video

Usually satin ribbons alone are not enough; the tree is decorated with beads, buttons, seed beads and other decorative elements. Many trees are decorated with organza and tulle. Each master class paints its own version of the decor, but you can make your own design, adding your own twist to such a ribbon topiary.

You can start with MK, which is not the most difficult to perform. To make such an elegant tree with your own hands, you need to prepare all the necessary materials.

Materials and tools:

Satin ribbons. Usually ribbons of three colors are taken. But you can also do multicolor if you want a variegated tree. But if, for example, you are making wedding trees, then you don’t need to take more than three colors.
Decorative pot. Again, the purpose of the souvenir is important. Wedding topiaries can be placed in pots with wedding symbols. For decoration, it is more convenient to take plastic pots.
Stick, rod– anything for a tree trunk. These can be sushi sticks, wire, paper towel rods, etc. Another master class advises using drumsticks, while another insists only on wire that can be bent as needed.
Newspaper, thread, scissors, needles, glue.
Decor for a pot(textiles, crumpled paper, beads, ribbons, sequins - everything that is available and what your imagination is enough for).
Spray can with gold or silver paint(depending on the color of the ribbons and the decor of the pot).

All listed materials are variable. If you do not want to make the base for the crown with your own hands, you can take a foam blank. It can be either a ball or a heart. Wedding favors and hearts are more compatible things. But making the same heart with your own hands is more difficult.

You need to make a souvenir tree in several steps:

The first thing you have to do with your own hands is the base for the crown. Take a newspaper and crumple it into a neat ball. The ball must be wrapped with thread on all sides so that it is sufficiently dense. Be sure to coat the base thoroughly with glue and set it aside to let it dry.
Now you need to make the roses themselves from ribbons. It’s good if you have ready-made ones, but most often you have to make the roses yourself. Take a pink ribbon, 35cm long. Make a bend and twist the ribbon into a small flagellum. Be sure to secure the flagellum with small stitches. Then another bend, which is again fixed at the base. And then according to the same principle, and how many such bends you decide for yourself, depending on how much pomp you need.
To secure the flowers, you need to use an awl to make a hole for each rose. During fixation, remember that the flowers must alternate correctly. For example, pink, white, pistachio.
Now you can make leaves. Each master class offers its own version of making leaves. This step-by-step MK chose the following method: cut out circles from green satin, fold them in half, and secure with threads. In order for the leaf circles to retain their shape, they need to be ironed. After this, the edges of the fabric are melted over a candle and smeared with a small amount of glue.
The trunk of the future tree can be wrapped with twine or decorative braid.
After the leaves are ready, they need to be installed in the crown between the flowers. You will get a lush ball filled with flowers and leaves, fixed with glue.
In a prepared pot you need to pour plaster into which to insert the trunk of a tree with a crown.

After the structure has hardened, either artificial grass or pieces of the same atlas are placed on top of the plaster.

Topiary made of satin ribbons (video master class)

Topiary made of satin ribbons and organza: manufacturing methods

A beautiful topiary can be made from flowers not only from satin ribbons, but also from organza. If everything is clear with ribbons, then how are organza roses made?

A decorative “tree of happiness” from satin ribbons and organza can be made in an unconventional form

This master class is simple:

Method one. A long ribbon of organza can be burned onto a candle and rolled to form a flower shape. The lower tip is fixed with a needle and thread. You will get beautiful simple buds.
Method two. First, cut out the templates; organza blanks are already made from them. Also melt the edges over the candle so that they do not crumble and the petals become convex.
Method three. From organza you need to build squares that are folded diagonally, folded like an accordion or a fan. They can be connected with a stapler, resulting in a lush organza flower.

MK: topiary made of organza and ribbons (video)

Flowers made from satin ribbons for topiary: sunflowers

You can also make beautiful sunflowers from ribbons for a souvenir tree. You will need approximately 16 pieces of yellow tape, each 9cm long. You bend the segment at an angle in the center, and bend the lower end towards the upper so that the tips of the two ends are connected.

Then the corners of the combined ends are folded to the center and fused over the candle. And so - all 16 segments to get beautiful sunflowers.

A felt brown circle is the middle of the flower. Petals are glued to it. You can lay out two rows of 8 pieces each. To decorate sunflowers with your own hands, you can plant a small ladybug on the flowers.

Sunflowers made from satin ribbons (video master class)

You can create a topiary of almost any complexity with your own hands. Whether it’s delicate roses or bright sunflowers, the workpiece is decorated with satin ribbons, and the result is a beautiful crown. Well, choose the place for such a souvenir yourself, and if you want to give it as a gift, the hero of the occasion will definitely be delighted with such a present.

Topiary made of satin ribbons (photo)

If you are thinking about how to decorate the interior of an apartment or office, then ribbon topiary will be the answer to your question. This mysterious name hides an artificial miniature tree strewn with flowers or bows. Do not forget that topiaries are considered to be crafts that will bring their owner good mood, happiness and good luck, that’s why you shouldn’t hesitate and start immediately.

Let us also note that a topiary made of satin ribbons will be an appropriate gift for almost any celebration: on Valentine’s Day you can give a tree decorated with red hearts, a topiary with pastel-colored flowers will be a great gift for a wedding or the birth of a child, a tree with bright colors and bows are perfect as a housewarming present.

So why not learn ribbon topiary how to do it, especially since on the handicraft website you will find many master classes - a step-by-step description of production, as well as photographs of each step will help you create a real small masterpiece without errors from such a seemingly simple material, like nylon or satin ribbons.

But, of course, in addition to satin or nylon ribbons ribbon topiary master class will also require the availability of other materials. For the tree you will need a base - here you can get creative, for example, crumple newspaper into a ball shape and wrap it with tape, purchase plastic ball in a children's store or foam plastic in a florist store. However, the base is not always a ball; for example, it can be made from cardboard in the shape of a heart or in the shape of numbers, especially if the topiary is intended as a gift for a memorable date or birthday.

The “tree trunk” will also depend only on your imagination - you decide whether it will be a stick, kebab skewers assembled together, wire or a corilus branch. Don’t forget about a beautiful container in which the tree will “grow”, a stand for the craft, as evidenced by the photo of topiary made from satin ribbons, you should choose it to match the interior - it can be an ordinary flower pot, a beautiful cup, an iron bucket, decorated using the technique or painted with acrylic paint, a shell or an unusual flat stone. We must not forget about the decor of the craft, which can give it a “zest”

But, of course, the flowers from topiary ribbons will dominate - you will make them with my own hands. For example, you can make a topiary of roses from ribbons - such topiaries always look very beautiful and romantic, or you can make other flowers, for example, daisies or daisies using the technique.

If you look at the topiaries from the photo strips, you will notice how varied these can be - from tiny ones that can fit in the palm of your hand, to quite large ones that can be placed in a corner and will decorate the room. And you can choose the master class you like on our website and start creating a miracle.

Delicate ribbon topiary: 30 photo ideas for a romantic gift

Ribbon topiary is a stylish interior decor or a delicate handmade gift Ribbon topiaries are one of the most popular hand-made gifts. More than one master class is devoted to how to create a beautiful tree with such an elegant, cute crown with your own hands. Flowers are usually made from ribbons, often roses, which become the main detail of the topiary.

Flowers from ribbons for topiary: master class No. 1

In order for the crown to be a scattering tender roses, you need to make at least ten of these flowers.

The width of the ribbon for the flower must be at least 2.5 cm, length – 20 cm. You can choose any color

Making roses from ribbons step by step:

Take the ribbon so that the reverse side is facing you;
Start twisting the left edge in the direction from left to right, getting a column;
Twist almost to the end, so that a small triangle with a side of 2 cm remains;
Now you need to twist the rose itself, hold the base of the flower with your left hand, and turn the ribbon away from you with your right hand, while bending it;
With your left hand, with your thumb and forefinger, hold the rose by the base, twist it counterclockwise, and with your right hand bend the upper edge of the ribbons away from you;
When the rose is formed, bend the end of the ribbon and connect it to the base;

Hold both ends of the ribbon with your left hand, thumb and forefinger, wrap the base tightly with thread and tie

In this case, the main thing is skill; the first couple of roses with your own hands may not turn out right away, but then the work will resemble a conveyor belt.

How to make roses for topiary (MK video)

DIY topiary made from ribbons: flowers, master class No. 2

You can also make flowers with petals facing out, like a chamomile. If you are making topiary from ribbons for some joyful event, perhaps for the birthday of a child or teenage girl, this master class will be just in time.

Great idea - a topiary with such flowers for the teacher, where all the guys from the class made a flower

Instructions with step-by-step tips:

Take satin ribbons different colors, you can even have a pattern;
Cut the tape into equal lengths;
You can make the base of a flower from two felt circles;
Bend one piece of ribbon in half, and insert the two open ends into the middle between the felt circles;
Do this with each petal, and you can fix it in the felt core using a heat gun or simply stitch it;
The petals can be multi-colored or plain, it all depends on what kind of topiary you ultimately want to get.

Experiment with the width of the ribbon and the core; it can be large, or maybe very miniature. The core can be a bead, a button, a glass bead, etc.

An alternative MK will show how else you can make flowers for topiary.

Flowers from ribbons for topiary (photo master class step by step)

For the flower we will need ribbons of two colors 25 and 50 mm wide, rhinestones, felt, glue, thread, needle, scissors, lighter

We cut the ribbons into equal rectangles and trim the edges with a lighter. To form a petal, bend the edge of the tape, as shown in the figure, then bend the tip of the bent edge back. We do the same on the other side

We connect and fix the edges with thread. We will need quite a lot of such elements

We form a rose from the petals and glue it to a felt base.

Fold a piece of ribbon of a different color in half, cut it diagonally, and connect the edges with a lighter.

We connect the structure with glue; a folded petal can be fixed in one of the elements

We decorate the flower at our discretion. Decor for topiary is ready

Such a flower can become a bright highlight in your topiary; the remaining elements can be made simpler.

Ribbon topiary: how to make a sunflower

This MK also involves many variations. Most often it is a combination of materials, such as ribbons and coffee beans. This DIY option is probably the most popular.

It's not that difficult to make. You will need a yellow satin ribbon that is wide enough. From it you must cut out at least 20 identical petals. To prevent the fabric from falling off, it will have to be melted over a flame, but only together with the fastenings.

To decorate the center of your sunflower, you can use unhulled seeds, coffee beans or the same ribbons

The fact is that you are not just cutting out oval petals, everything is a little more tricky.

To make a sunflower petal you need:

Take a piece 15 cm long and bend it in half;
Bend it so that when you connect the ends you get a loop;
When melted, the ends will not only not crumble, they will also be held together.

In order for a sunflower to be lush and beautiful, there must be two rows of petals - upper and lower

You make the core with your own hands from coffee beans. You can glue them onto some kind of durable base like felt or regular cardboard.

DIY sunflower made from ribbons (MK video)

Ribbon topiary: master class from start to finish

So, it's time to use flower blanks and finally make this souvenir flowering tree.

Having collected all the materials together, you can start by making the base for the crown. Let's say you decide not to make this base ball with your own hands, but use a foam blank. Great, save time. But if you don’t find such a blank, take the most ordinary newspapers, threads and glue. Make a ball of newspaper, weigh it down with glue, and wrap it with thread until it looks like a ball. The base is ready!

Also, an excellent base for topiary suitable size can be made from macroflex

The newspaper ball needs to be painted to match the color of your roses, daisies, etc.;
In one of the places of the ball, make a hole for the barrel;
You can insert the trunk into the ball immediately, fix the branch or stick with hot glue;
Hold the barrel in the ball for a while, do not let go until it “grabs” well;
Now this entire structure can be decorated - wrap the trunk with satin ribbon or decorative braid, without deviating from the general color scheme;
Fix the ends of the tape or braid with glue;
The time has come to attach the flowers, hot glue and a hot glue gun will help you do this carefully, attach so that the gaps are as invisible as possible;
The result is a trunk with a crown that needs to be planted somewhere;
You can buy a beautiful flowerpot at a flower shop, and you won’t have to do anything yourself;
You can decorate any container - wrap a cup or glass with lace ribbons or crepe paper, paint it acrylic paints, wrap with knitting threads to match the crown, etc.;
Now pour the gypsum solution into the pot and lower the tree there, hold until it stands firmly and evenly in the plaster;
All that remains is the finishing decor - decorate the top layer of plaster with transparent artificial stones, which shimmer so beautifully in the sun.

A topiary pot can be decorated with any decor you have on hand. It can be textiles, twine, corrugation and much more.

You can plant a figurine on one of the flowers ladybug or a butterfly. Everything is ready, you have made a delicate topiary with your own hands from satin ribbons, worthy of a gift and the best decor for a girl’s room.

Ribbon topiary: do it step by step (video)

Remember that topiary is considered a tree of happiness, which means that by growing a tree in this handicraft way, you are creating. And any creative work is connected with thoughts, desires, and spiritual forces. Make a wish, and your tree may help make it materialize.

DIY topiary crafts made from satin ribbons. Ribbon topiary