How much does it cost to sew covers for a car? Individual tailoring of covers
Our car studio is engaged in the manufacture and sale of high quality car covers of any type - both model and universal. The following materials are used for sewing:
- eco leather;
- Genuine Leather;
- velours;
- arigona;
- flock;
- jacquard;
- combined material (eco-leather + flock, eco-leather + jacquard, etc.).
We ourselves sell car seat covers, sewn in our own modern production, so their cost is acceptable for car enthusiasts of any income.
The best option when choosing car seat covers, in our opinion, is modern material - eco-leather. Over the 20 years of its existence, it has established itself in an extremely positive way. Car covers made from it are not inferior in their properties to other, even the most expensive, materials, and sometimes even surpass them in many respects. The cost of a finished eco-leather product depends on the country of manufacture (Germany, Italy, China).
Despite the fact that our studio offers a variety of materials for the manufacture of car seat covers, we still recommend choosing eco-leather. Its practical benefits are undeniable.
The main advantages of eco-leather:
Eco-leather car seat covers have many advantages over products made from other materials:
- Appearance. It is almost impossible to distinguish it from genuine leather - appearance products are absolutely indistinguishable. Leading premium car manufacturers (for example, BMW) have been using this material in their production for several years, since it is in no way inferior to natural leather and fabric.
- Price. The cost of eco-leather is significantly lower than the price of leather material - cases made from it are offered 5-10 times cheaper. By saving your money, you will not skimp on quality.
- Breathability. Eco-leather allows air to pass through (unlike natural leather), but does not allow moisture to escape (unlike fabric).
- Tactile sensations. The car seats are pleasant to the touch, warm and soft. The advantage of this material over its “competitors” is that it does not stick to the skin of the driver and passengers even in the hottest heat.
- Resistant to smudges and other contaminants. Dirt rarely clings to seats with eco-leather covers, but, if necessary, it can be removed without much difficulty.
- Heat resistance. The material does not crack or break even in the most severe frosts, and remains pleasant to the touch. At the same time, eco-leather does not ignite, so heavy smokers can be calm about their lives and the safety of loved ones.
- Strength. Eco-leather is so durable that even in the event of mechanical impact with a sharp object, the material is resistant to tearing. For this reason, automobile products are manufactured with special technological seams that can allow the deployment of airbags that are built into the car seats to pass through.
- Safety. Eco-leather is environmentally friendly and hypoallergenic, so it is harmless not only for adults, but also for children.
- Quality. For the production of eco-leather, natural raw materials are used - polyurethane rubber, which cannot be said about cheap and short-lived materials (acrylic leather, leatherette). At the same time, no damage is caused to the fauna of the planet - the skin is not torn off from animals.
- Durability. The service life of eco-leather covers can be tens of years, which is confirmed not only by enthusiastic consumer reviews, but also by research (according to the results of the BS 5990 Martindel test, the wear period of car covers made of this material is 40-100 thousand cycles).
The conclusion is obvious: car covers made of eco-leather have absorbed the advantages of all materials presented on the modern market. At the same time, their price remains affordable for any car owner. If you have any doubts, you can read reviews from satisfied customers on automotive portals or ask the opinions of friends and acquaintances who have purchased and installed such seats in their cars.
Our advantages:
The covers offered by our company are made of environmentally friendly and durable materials developed exclusively for the automotive industry. When sewing, the characteristics of vehicles of each brand and model are taken into account, since only original patterns from manufacturers are used.
A wide range of premium quality car covers includes a huge selection of colors and types of materials. Custom tailoring is possible. Related items are also available in our online store: floor mats, interior cleaning products, steering wheel covers, etc.
Managers of our company will be happy to answer any questions regarding the sewing and sale of covers made of eco-leather and other materials, and will help in choosing the best option. Free delivery of car covers is possible at any time convenient for you. Payment is made upon receipt - only after receiving the goods. If desired, we will install seat covers for your car ourselves.
We bear full responsibility to our customers for the quality and appearance of manufactured products, therefore we carry out regular production monitoring. The warranty on the car covers we offer is up to 2 years.
Or leave a request via the form:
I would like to thank the company for a beautifully made awning for the VAZ 21099. I use the car only in the summer, in winter period The car is under a canopy and covered with a large layer of dust, bird droppings, etc., in the spring it took a long time to wash it. I hope this problem won't happen again.
Zhivov Oleg, Mozhaisk
A friend installed eco-leather covers in his car. After that, I found out and looked at them, I also liked them and I decided to contact the same company where my friend successfully bought covers. This is a website, competent managers, we selected the blue Deluxe eco-leather covers that matched my brand of car, OPEL ASTRA. The guys from the company were great, they brought the covers promptly and installed them carefully and carefully. I was pleased with the purchase and cooperation with the company.
Alexander
I ordered eco-leather covers for Mazda 3. The garage appreciated it right away. They said that they look very solid. The interior was completely updated and all the seats were installed. I made the replacement myself. I didn't remove the front seats. The order was placed quickly, without delay. Delivery did not disappoint, everything arrived on time. The covers arrived without damage or stains. The set is completely the color that I ordered. In this regard, the store did an excellent job. The covers are pleasant to the touch and you don’t feel cold when sitting on them. It's very good for the lower back to be warm. In general, my interior has been transformed beyond recognition; it’s a pleasure to sit on the new covers. I recommend eco-leather covers for other car owners.
I was looking for a good, high-quality and reliable cover for my Audi A3 sedan, a friend recommended that I contact this online store; there is a fairly large selection of covers made from high-quality Italian eco-leather for all brands of cars. Of course, the manager selected an excellent cover for my Audi A3, answered all my questions, gave competent and useful advice on long-term savings and correct use cover. The order arrived in 5 days in neat packaging, I’m very glad that there is a 2-year warranty on the covers and free exchange. The guys installed everything quickly and efficiently, I have no complaints, I’m happy with the purchase.
Since my iron friend, the mitsubishi OUTLANDER brand, has been performing for quite a few years since I bought it brand new, the seat covers have seriously worn out during its operation. I decided to purchase new covers. After searching for offers on the Internet, I realized that the best option for me would be the now popular eco-leather cases, which I was able to find at a good price from this company. In the assortment, which has special covers for my car model in different colors. I chose the gray Deluxe case from the offered cases. I liked that after payment, the covers were delivered to me strictly at the agreed time and they were carefully installed for me. I was pleased with the cooperation with this company.
I ordered the covers. The guys came home and installed the covers pretty quickly. The price is quite normal, I don’t know where to look for cheaper, it’s quite a normal price for such work. The interior of my car has freshened up a little. I can recommend it to others.
The car began to look expensive and prestigious, the price was several times less than for a leather interior. What I liked:
1. Looks very good
2. Pleasant to the touch, really similar to natural leather.
3. Washable! this is a big plus, because... There was a lot of dirt on the sofa... I wash it almost every two weeks...
4. Not expensive compared to genuine leather.
I ordered covers here. Arrived in the mail quite quickly, but with the wrong set of headrests. We were offered to replace them without any problems, but we were still upset, because we could have bought a ready-made one in Moscow right away for a slightly higher price. However, after carefully studying the configurations of other interiors of our car model, it was discovered that this is a limited edition with original headrests. And representatives of the Council of Ministers could not have predicted this. What's the result? There is a happy buyer who literally received a custom set of covers, and there is a seller who instantly accommodated them. WE RECOMMEND!
Alexander
I ordered Luxury covers for the Hyundai Solaris Sedan II, beige with an orange insert and stitching. The order arrived in two weeks. I installed it myself, no problem, without unscrewing the front seats. It all took about 1.5 hours. Everything worked out great. The covers provided holes for the headrests and for fastening the rear sofa. The only thing that upset me was the lack of slots for the rear seat backrest fasteners; I had to cut it myself. Two lounge pillows were also ordered to match the covers. They are made carefully and moderately soft. Everything looks just great together!
If you're tired of taking your car seats to the dry cleaner for the umpteenth time, perhaps it's time to think about purchasing special protective covers. Of course, you can buy covers at any auto supply store. But isn’t it more interesting to sew them yourself? After all, this way you will know for sure that the material is of high quality, and the seams are carefully worked out. In addition, you can make the pattern yourself and choose color scheme according to your taste and style of the entire car. An equally useful purchase is an awning that protects the car from the sun, dust and moisture. It’s very easy to make them yourself; you don’t even need any special tailoring skills.
Why do you need car seat covers?
Car seats get dirty very quickly. They appear greasy spots, crumbs, dust deposits. The pile may roll up and general view The seats won't be very attractive. To protect yourself from all these problems, you just need to protect the chairs with special covers. Such capes have many advantages:
- protect seats from cracks and scratches;
- do not allow the seat upholstery to fade in the sun;
- cleaned from dust;
- they are easy to remove for washing;
- create comfort in the car;
- allow the driver to express his individuality.
You can even sew several covers different types and colors, and then change them to suit your mood, weather or season.
Making a chair cover with your own hands
Sewing a seat cover yourself is not too difficult. The whole process can be divided into several stages:
- selection of cover type and material;
- taking seat measurements;
- pattern making;
- sewing a cover.
Selecting the type of case
First of all, decide what kind of case you need. All of them can be divided into several categories:
- T-shirt capes;
- model cases;
- knitted covers;
- massagers;
- heated covers.
A T-shirt cape is one of the most versatile and popular types of covers among motorists. It got its name because of its specific style, which really resembles an ordinary undershirt. They are convenient and practical: they are easy to remove and clean from dirt. In winter, sitting on them is much warmer and more comfortable than sitting on cold leather upholstery. In addition, with proper selection of colors, such covers will look very stylish in the interior of the car. Choose a shade that matches the seats to make the covers as discreet as possible, or create a special accent with a contrasting color.
Model covers are made individually for each seat. They fit tightly and exactly follow the shape of the chairs. They are quite difficult to take off and put on for washing. You can order such covers only in special stores or car workshops.
Knitted capes resemble T-shirts in their properties, but are made not from ordinary fabric, but from yarn. If you have experience in crocheting, try making a cozy and original cover for yourself.
Massager capes differ not only original look, but also benefits for the body. It's no secret that a person's back experiences great physical activity and can be very tired after a hard day at work. But with the modern rhythm of life, not everyone has free time to visit a doctor. This is where massagers come to the rescue. They can be divided into two types: passive and active.
Passive massagers were very often found on car seats in Soviet era. They consist of wooden balls or cylinders strung on a frame, which precisely apply pressure to your back and neck as you move.
But now active massagers are gaining more and more popularity. Outwardly, they look like regular T-shirts, but inside they have a special roller or vibration mechanism. It comes into action when you connect the cape to the cigarette lighter. With such a case, time spent in traffic jams and at traffic lights will fly by unnoticed.
Cases made from wooden elements cool quickly when low temperatures. Therefore, using them in winter will not be very comfortable.
And, of course, you can’t ignore the heated covers. Outwardly, they are similar to T-shirt capes, but at the same time they have a heating element that makes the seat warm even in the coldest weather.
Secrets of choosing material
The second step is choosing the material for the future product. Today, the car accessories market offers a wide range of fabrics and materials for sewing covers. Each of them has its own unique properties, advantages and disadvantages. Choose the material based on your taste preferences and features of vehicle use. Among the most popular materials are the following:
- natural and artificial leather (eco leather);
- natural and artificial fur;
- neoprene;
- velours;
- polycotton;
- suede;
- vinyl.
Genuine leather is one of the most popular materials for cases. It looks expensive and stylish, while being quite easy to care for. At proper care a leather cape will serve you well for many years, and protection from ultraviolet rays will prevent it from fading in the sun. However, this material has a couple of significant drawbacks: for example, leather does not retain heat well, which will create inconvenience in cold weather. In addition, with sudden temperature changes, unsightly cracks may form on it. Eco-leather is a smart choice for those who want to get all the benefits natural material, but at the same time is not ready to pay the full price.
No less popular are capes made of natural fur. Their main advantage is the ability to retain heat in cold weather, which, unfortunately, they are not capable of. leather cases. Sheep and goat wool are considered the highest quality materials: they do not fade and retain their original appearance for a long time. But faux fur cannot boast of the same. In addition, it is not as good as insulation as its natural counterpart. As a rule, faux fur covers serve only a decorative function.
The color range of both artificial and natural fur covers can be very diverse. Upon special order, the material will be painted in any color of the rainbow.
Perhaps the main disadvantage of such a cape is that it quickly becomes dirty. At the same time, you can clean it yourself only from dust and small crumbs. And even then you will need a car vacuum cleaner for this. But to get rid of large stains with bright color and only dry cleaning will help with the pungent odor.
Neoprene is a practical synthetic material that looks modest, but does not have any particular disadvantages. Neoprene is resistant to temperature changes and is not flammable. With regular cleaning, it will hardly wear out and change its properties. Neoprene is suitable for those who prefer practicality to beauty.
Making covers from velor is one of the most economical options due to the low cost of materials. It maintains a neutral temperature in any weather. It is quite easy to care for: timely washing and ironing will help it remain soft to the touch for a long time.
Polycotton, as you might guess from the name, combines the advantages of natural cotton and synthetic polyester. Due to its water-repellent properties, it can easily survive machine washing, so it is suitable for those who often carry small children and animals.
Suede covers are not so common among motorists, so they are suitable for those who love everything unusual. They look expensive and elegant, and with proper care they delight owners with their durability. The main thing is not to forget to clean the suede from dirt in a timely manner.
And finally, vinyl. This is a synthetic polymer material that is highly practical: it does not allow or absorb moisture, is difficult to get dirty and is easy to clean from dust and small stains.
Taking measurements for the future car cover
Just like when sewing regular clothes, before making a car seat cover, you need to take measurements from the seats. To do this you will need the following parameters:
- height and width of seat backs;
- length and width of the bottom pillow;
Pay attention! The figures shown in the image are not universal for all car seats. Measure all the necessary parameters for making the pattern yourself.
Remember that when making a pattern you need to add a margin of 2-3 cm in each direction; it will come in handy when sewing the parts together.
For ease of work, you can take a regular oilcloth, which is slightly larger than the dimensions of the seat. Then use a marker to transfer the outline of the chair onto it, paying attention to the seams. After this, you need to cut out the resulting diagram along the contours and cut it into its component parts. This blank will help you accurately transfer the pattern onto the fabric.
Nuances of patterns for car seats
In order to make a pattern, and subsequently sew a high-quality cape for a car using it, you need to prepare the following set of tools:
- markers;
- meter tape;
- chalk for cutting;
- sharp tailor's scissors;
- stationery knife with a wide, dense blade;
- a set of threads of suitable colors;
- needles and pins;
- sewing machine.
- In order to make a pattern for covers, you need to do the following:
- Take the prepared polyethylene parts and use chalk to carefully transfer their outlines onto the fabric. Remember to spare centimeters on each side.
- Place the pieces on the fabric in such a way as to use its entire surface and leave as few empty areas as possible. In this case, the distances must be calculated so as not to accidentally touch the adjacent part with scissors. Even if you have never sewed before, remember your school crafts lessons and crafts made from colored paper.
- Before cutting out the pieces, cut the fabric into several small pieces. This will make your work more convenient.
- Carefully cut out the pattern, helping in some places with a utility knife.
- If the fabric is very wrinkled during the previous steps, you can lightly iron or steam it. This will make the stitching process easier.
Patterns of seat covers for Volga car in the photo
pattern diagram for the front seat of a Volga car pattern diagram for the rear seat of a Volga car pattern diagram for the rear seat cushion of a Volga car
Table: Important explanations for machine parts
Item no. | Detail | Number of parts per case |
I. Front seat cover (Fig. 1) | ||
Front seat cushion cover assembly (1) | ||
2 | Front | 1 |
3 and 4 | Side part | 2 (left and right) |
5 | Upper part | 1 |
6 | Holder | 5 |
Front seat back cover (7) | ||
8 | Rear end | 1 |
9 | Upper part | 1 |
10 | Front | 1 |
11 and 12 | Side part | 2 (left and right) |
II. Rear seat cushion cover (Fig. 2) | ||
13 | Front | 1 |
14 and 15 | Side extension | 2 (right and left) |
16 and 17 | Side part | 2 (right and left) |
18 | Upper part | 1 |
19 | Holder | 12 |
III. Rear seat back cover (Fig. 3) | ||
20 | Front | 1 |
21 | Upper part | 1 |
22 | Rear end | 1 |
23 and 24 | Side part | 2 (right and left) |
25 | Holder | 14 |
Of course, the size and shape of the parts will vary depending on the make and model of the car. Refer to the images here to correctly cut the material for your car seats.
That's it, your pattern is ready. All that remains is to assemble the parts together.
Sewing a cover: step-by-step guide
After you have cut out all the components of your capes from the fabric, you need to carefully sew them together. It was for these purposes that spare centimeters were left at the edges of the parts. First, connect the pieces of fabric using pins, and then finish them with a hand basting stitch. If you make a mistake at any stage, such a seam will be easy to rip.
Once you are sure that you have done everything correctly, start sewing the elements together using a machine.
If you have chosen soft fabric for the cover, but want to increase its density and strength, use the following trick: make similar patterns on the mattress fabric, and then sew each piece with the wrong side inward. For even greater compaction, fill the covers with foam rubber.
To keep the chair in place, take care of the fixing elements: hooks, elastic bands and garters.
Don't forget about the design features of your seats, such as seat belts and an armrest in the back row. In addition, the covers must not interfere with the deployment of the airbags. Take care in advance to create the necessary slots in these places.
To make the seams stronger and more durable, add durable leather or nylon tape to them.
Video: how to sew a car cover with your own hands
Why do you need a car awning?
Few people think about how useful a car awning is. If you do not have your own garage, or it is located far away, such a protective cover will protect your car from many harmful influences. Imagine that you and your family went out into the countryside, but suddenly it began to hail: large ice peas can seriously damage the car’s surface, and sometimes even break the windows. To prevent this from happening, cover the car with an awning.
Thus, the case performs many useful functions:
- protects the car's paintwork from fading in the sun;
- protects against rain, hail and snow;
- prevents dust from entering the mechanism;
- reliably protects the car from birds and street animals.
As you can see for yourself, this is an extremely useful accessory that can be easily carried with you in the trunk of your car and used at the right time.
There are two main types of awning fabric:
- Oxford;
- tarpaulin.
Oxford is a synthetic fabric impregnated with polyvinyl chloride or polyurethane. Its density can reach 500 g/m2.
Tarpaulin is a material consisting of durable polyethylene threads that are tightly woven together. It is laminated on both sides with a special light-stabilized film.
The materials are united by increased strength and resistance to temperature changes. At the same time, the air underneath can circulate freely, which means that moisture will not accumulate on the walls of the car. Such an awning will not fade in the sun itself, and will not allow this to happen to your paint.
It is quite easy to care for such materials: clean them as they become dirty with a brush, and periodically wash them in a regular automatic machine. Average price for fabric for awnings varies between 70–180 rubles per m2.
Making a car awning with your own hands
Sewing a car awning with your own hands is much easier than, for example, seat covers. It is easy to work with durable fabric, because it will not tear or stretch under the needle sewing machine. In this case, minor flaws on the seams will be invisible to prying eyes.
The procedure is almost the same as when sewing chair covers. Except that the awnings have only one style, and the variety of materials is not so high. Use the same set of tools as when working with seat covers.
Making a pattern
The work begins with machine measurements. You can greatly simplify this process by looking at the instruction manual: as a rule, all the main parameters of the model are indicated there. But for reliability, check all measurements with a meter tape.
There are two ways to sew an awning:
- longitudinal parts;
- transverse parts.
Using the method with longitudinal parts, you separately prepare three parts: one upper part, passing over the hood, cabin roof and trunk of the car, as well as two side parts.
- Measure the length of the top from the front to the rear bumper.
- Measure the width along the windshield.
- Measure the height of the car in the area of the hood, cabin and trunk.
- To make the cover fit more freely, add 20–25 cm on each side.
- Based on the values obtained, transfer schemes of three longitudinal strips onto film or paper, and from there onto fabric.
An awning sewn using transverse parts looks a little different. It also consists of three parts, but they are located in the area of the hood, cabin and luggage compartment.
- Measure the hood from the middle of the right to the middle of the left wheel.
- Measure the width of the hood from the license plate to the windshield.
- In the same way, measure the width and length of the cabin, and then the trunk.
- Add 20–25 cm on each side.
- Transfer the outlines of the three transverse stripes onto the paper and then onto the fabric.
Thus, if you use the first method, the seams of the parts will be along the contours of the top of the car. And with the transverse method, the seams will pass under the windshield and rear glass.
Both methods are quite simple both in cutting and in the sewing process. Choose the one that seems more convenient and aesthetically pleasing to you.
We sew an awning
To sew dense pieces of fabric, use special threads with polyester reinforcement. Connect the edges of the parts with pins and finish with a basting stitch. Try it on your car. If everything fits as it should, sew the seams using a sewing machine.
If your car does not have the function of pressing the side mirrors, do not forget to make a margin of up to 50 cm for them.
Stretch a regular elastic band along the bottom contour of the awning and stitch the fabric. This way it won’t lie on the ground and get dirty.
Your protective car cover is ready! Now you are not afraid of either the scorching sun or the snowstorm.
The new awning will perfectly protect your car from external influences, and seat covers will help keep the inside of the car clean. At the same time, it is not necessary to order them from workshops: sewing covers yourself is not the most difficult job. In addition, you can show your imagination: choose one fabric for your chairs or try to combine several. For example, combinations of suede and polycotton, leather and velor look interesting. Show your imagination and choose different textures and colors of materials, and your car will sparkle with new colors.
Today we will tell you how to sew car covers with your own hands. You can also prepare patterns for this operation yourself. After all, if the car is used intensively, then sooner or later you will definitely have to change the upholstery to a new one.
You can do this at a car workshop or buy ready-made covers in a store, but in the first case it will be expensive, and in the second there will be no individuality. Therefore, the most profitable option would be cutting and sewing yourself.
Among all the variety of fabrics in stores, it is necessary to choose the most practical materials to use. Leather upholstery or its artificial substitutes have a large number of fans. It is easy to care for and does not wear as much. However, in the cold season, leather upholstery does not retain heat. It also does not tolerate sudden temperature changes.
Set of cases made by yourself
You can also sew a cover for a car seat with your own hands from polycotton. This material combines the positive properties of polyester and natural cotton. The fabric is machine washable, so caring for it is very easy.
When using velor, you can make inserts from other materials. This will highlight the advantages of the fabric and add individuality to covers or capes.
Fur upholstery made from natural and artificial materials is popular. A large selection of materials and colors will help you create any image for your car interior.
Preparing for surgery
Before you start sewing covers or cutting them out, you need to prepare the following tools:
- sewing machine;
- a set of sewing needles and pins;
- cutting chalk or marker;
- tailor's meter;
- tailor's scissors and a construction knife.
Pattern for universal covers
Measurements are taken from the car seats in advance. In order to transfer all the patterns onto paper, you can use newspapers or album sheets glued on one side with tape. Some beginners use large-area oilcloth, however, it is not very convenient to work with.
When transferring dimensions to a pattern, you need to remember to add 1-2 cm to the seams on all sides.
Sewing process
After you have prepared a pattern for car covers with your own hands, you need to start connecting the parts. When stitching, you can additionally strengthen the seam with a strong insert made of leather or nylon tape. This will ensure durability and practicality of the covers.
The main fabric should not be too soft. This may give the item a baggy appearance. To give shape you can side inserts made from a more rigid material, providing a more durable frame for the entire structure, as well as diluting the design with a new texture.
Pattern for the bottom of the chair Pattern for the front seat Side and rear sofa Pattern for the headrest
Ribbons, elastic bands or hooks must be added to finished products for good fixation. With their help, the covers do not slide off the chairs.
When forming a pattern and sewing it together, it is necessary to comply with the design features of the back sofa. It may have an armrest in the middle. You need to make sure that new covers do not reduce the convenience of the car and allow you to enjoy all the advantages of the design.
The rear passenger seat is often divided into two parts for reclining and access to the trunk. This way you can transport long loads. New covers must take this feature of cars into account. When cutting and sewing, you need to cover the chair on all sides with new covers.
Security
Foreign cars can be equipped with end airbags. In order not to reduce the level of protection for passengers and the driver, it is necessary to ensure that the seams at the exit points of the airbags are sewn with weak threads. You can also leave neat machined slits for this operation.
In addition to natural causes - wear and tear of the car seat trim, mechanical damage, burnout of the upholstery, the motive behind sewing a cover for a car seat is the car owner’s desire for self-expression. The desire to transform the interior of your own car into something individual, emphasizing the taste of the car owner. Therefore, sewing car seat covers to order in Moscow using individual patterns, which are used for further cutting, is a service that is gaining popularity. The Garant automobile studio provides services for sewing car seat covers, upholstery and restoration of car interiors, helping the car owner realize his wildest dreams in the interior of the vehicle. Call the phone numbers listed on the official website of the specialized studio and order the service today!
Attention! You can get acquainted with the prices of tailoring car covers to order at the Garant tuning studio in Moscow on the organization’s website, where price lists are presented. You can also get detailed advice free of charge by telephone or using the feedback option.
What materials does the Garant car studio offer?
For sewing car covers in Moscow, the Garant tuning salon offers car owners a wide selection of various materials of various textures and colors - having its own warehouse contributes to this. The most popular materials are:
- Genuine Leather. Sewing a cover from genuine leather for an auto seat means that the result is guaranteed to result in a luxurious, respectable interior of the car. In addition to this, genuine leather is a practical material that is wear-resistant and has good resistance to mechanical damage.
- Faux leather or eco leather. No less popular material than its natural counterpart. Actually, sewing covers for car seats from eco-leather will provide the car enthusiast with reliable, durable upholstery of car seats, which, among other things, is not demanding in maintenance - it washes well.
- An alternative to eco-leather is Alcantara - artificial suede. This is an elite material with a silky texture that is pleasant to the touch. A car showroom, where custom car seat covers are made from Alcantara, always looks presentable, and the elastic material has an incredibly long service life.
It is not fair not to mention sewing covers from different types of fabric for car seats, which are specially designed for practical use in vehicles. This is also a popular service among domestic car enthusiasts, as, for example, sewing car covers from eco-leather to order at the Garant car studio.
Attention! Auto studio "Garant" carries out free dismantling of old and installation of new covers for car seats.
What kind of covers does the Garant car studio sew?
Long-term (more than 12 years) successful work, as noted in numerous reviews, the work of a specialized studio, as well as a staff of highly professional employees, allow us to qualitatively sew car seat covers of the following types:
- model covers that perfectly match the shape of the seats of a specific car model;
- universal covers with a shape thought out to the smallest detail and the presence of supposed technological holes - an excellent option for those car owners who save their time;
- “T-shirt” covers are a budget option, as they are sewn exclusively for those areas of car seats that are most susceptible to wear and tear (headrests, seats).
In addition to the above, the Garant car studio carries out individual tailoring of covers - exclusive material, product design, original inserts, stripes, and so on. So, the atelier for sewing car seat covers in Moscow “Garant” is waiting for its customers!