DIY bologna bag pattern. DIY leather bag: patterns and step-by-step description
Made from fabric? Read the tips step by step instructions. Choose your favorite options. Make fashion accessory You can easily do it yourself using scrap materials.
The simplest bag
Even a beginner can cope with this task. To sew this accessory, you will need fabric for the bag itself and for the handles. They are made from both the same and contrasting materials. Special reinforced cords or tapes that are used for seat belts are also suitable. made of fabric can be both complex and simple. The manufacturing technology is as follows:
- Cut out two identical rectangles from the fabric. If the material large size, and not in leftovers, then first bend it in half and make one large piece. The fold will be the bottom of the bag.
- If you don’t have ready-made handles, sew them yourself from the same fabric. To make such a strap, cut out a double-width strip or a couple of separate the right size. Don't forget about seam allowances. Sew the strips from the inside out and turn them inside out. You will get a belt. Iron the edges. Make a second similar part in the same way.
- Sew one edge of the handle in the desired place, first from the front side of the bag parts. Do the same with the second end. You should now have a loop handle.
- Fold the edge of the bag piece by 3-5 cm and sew it on. Handles will be attached to it. If you are going to carry a lot of heavy things in your bag, you need to sew them firmly, so it is better to make the bend wider. Attach the handle to the fold along the perimeter of the rectangle and its diagonals. Now everything will hold tightly and will not come off. Do the same with the second strap. By the way, you can attach it with a regular seam or a zigzag. The second one will be more reliable and will also secure the edges.
- Sew the main parts of the bag on the sides with the fold line at the bottom or on three sides if the bag is made of two parts.
The simplest option is ready.
You can also make an additional bottom and side connections in the form of rectangles, that is, your bag will resemble a fabric suitcase. Accordingly, more seams will have to be made.
made from fabric with your own hands
One more simple idea- sew a product from a T-shirt that you do not wear or have not worn at all.
The manufacturing technology will be as follows:
Using old books as a base
There are a wide variety of ideas for a handmade handbag.
You can use not only old T-shirts, but even a book cover as a base.
The bag from the cover is made according to the following scheme:
- Pick up an unwanted hardcover book. Using a knife, carefully cut out the block of pages. You don't need it in this case.
- From the fabric you make two rectangles for the sides or one common for the entire structure of the bag. Don't forget about seam allowances.
- You will also need two triangular (trapezoidal) pieces for the “ends” of the bag, straps for the handles and fastening elements.
- When everything you need is prepared, place the cardboard binding on the fabric. Bend the protruding edges inward and glue them to the base.
- Sew on or secure in any other way the handles and fastening elements.
- Glue the inside of the bag, that is, the lining. It may be made of the same material or another.
- Sew on the side triangles.
The bag is ready.
We use boxes
The original version can be made from ordinary tea boxes or any other. You will need two of them. One for the base and lining, the second for the outside.
If the front part is not covered with fabric, the surface of the box should be beautiful. Both blanks must be taken the same in size. If you don’t have these, it’s easy to make the inner one the size of the outer one from cardboard or thick paper. So, get to work. Your actions should be as follows:
- Open the first box until it is flat. Remove unnecessary parts. You only need the bottom, four sides and a lid. The cardboard needs to be reduced a little by cutting off the edges so that it can then fit inside the second box.
- Cut a piece of fabric according to the shape and size of the workpiece, taking into account allowances for bends.
- Place the fabric on a cardboard base, fold the edges inward and glue. Fold the box so that the fabric is inside.
- Insert the lining into the second box.
- Attach handles or a long chain, as well as a loop and bead for fastening.
- Glue the space between the two layers of the bag.
If you don’t have a beautiful box that can be used as the front side of the product, you will have to cover the second box with fabric, after unfolding it.
How to sew a shopping bag with your own hands
Here is a simple way to make a stylish shopping bag with which you can go to the market or grocery store. It is made from an old T-shirt or T-shirt.
The material must be stretchy. Do the following:
Everything is ready.
Bag decor and updating old models
Now you know how to sew a bag with your own hands from fabric, and you can do it. However, you should think about the decor.
Even the most simple thing, originally decorated, will look impressive and stylish. Elements made using the kanzashi technique, as well as flowers made from felt, look very beautiful. You can cover the surface with rhinestones, sew on sequins, embroider with beads or ribbons. If you love crafts, you've probably done something similar.
Even though you've learned how to make your own fabric bag, you may just not want to do it. Remember that there are always options for upgrading older finished products. The easiest way to do this is with decor, but radically change appearance Coloring things will help. Acrylic is suitable for leather products. To make a design on a bag, you need to use stencils cut from film or regular tape. They can be used to seal vertically or horizontally sections of the bag. Paint the uncovered ones in a color contrasting to the old tone. After drying, remove the tape and cover the product with leather varnish. The effect will surprise you.
So, you have learned how to sew a bag with your own hands from fabric. Choose any model, your favorite decor option and create your own fashion accessory. And if you don’t have any time for handicrafts, just update your old bag the proposed methods.
Not everyone knows that sewing a bag with your own hands from a piece of some fabric found at home or not too thick leather is not as difficult as it seems at first glance. Difficulties can arise if the material is too thick, such as leather or denim, or the pattern is not simple.
How to sew a bag? Which one? A small women's room or a large roomy utility room, a fashionable and stylish one for yourself or a children's room...
Homemade summer bag You can sew it from almost any material you like. A model and pattern diagram with dimensions can also be made based on your own ideas about shape and spaciousness. It is advisable to start with simple patterns. Otherwise (in professional language) a pattern is called a pattern. Keep this in mind when searching too.
From felt you can build a very cute flat handbag in the shape of an owl or a wolf with huge eyes (photo below towards the end of the article) for an electronic device.
I was surprised that for some reason a lot of visitors come to this page for the query “ DIY fabric bags patterns for the very stupid". You can't talk about yourself like that. If you are planning to sew such a thing, then I think you can easily figure it out. As a last resort, if something is not clear, then you can ask!
DIY bags - patterns
For example, if I carry an umbrella in my purse, then it should fit there - horizontally, vertically, or diagonally.
Think over the situation in advance - if your umbrella breaks, you will buy a new one, which may be slightly longer than its predecessor.
It is better to make sure that a standard size umbrella fits inside.
Three patterns of GUCCI leather handbags
To begin with, I will provide patterns for several GUCI bags, they were originally given for making paper layouts, but they can also be used for sewing normal ones from fabric or other material with your own hands. The next three photos, if you are interested in the patterns, can be enlarged a little, they are clickable.
The photo shows mostly only patterns of bags without sizes. Little advice for those who have found a suitable model for themselves and want to sew a similar one. Take a picture with a pattern, open it on a large screen in any graphic editor, enlarge the diagram to the desired size. It’s even easier for me - my screen is a large TV. :)
Place loose paper or tracing paper on the screen, fix it and trace with a soft pencil. If you are planning to sew a small bag, then a regular screen may be enough for you. Otherwise, increase the image to " natural size» bags (even if it doesn’t fit into the entire screen) and trace the pattern piece by piece, moving the photo on the monitor.
When cutting your bag, don't forget the seam allowances!
By the way, the leather pattern of a pendant tassel for decorating a bag is similar to a paint brush; it is made exactly as shown. It is not cut completely into strips, then the area of skin is moistened with glue and rolled into a tube.
Details such as size and shape, the presence of external and internal pockets must be thought out in advance, based on your needs and preferences.
Focus on the size of your wallet when thinking about pockets. They say that it is safest to store your wallet vertically in the middle of the bag in a specially made compartment, this way it is much less likely that a pickpocket will get to it. They usually cut the outside side surface or end with a sharpened coin and steal what they fumble inside. The second time cutting - inside - is already inconvenient.
Some people sew a special pocket for an umbrella with a zipper at the bottom of the bag or underneath it. This is also very convenient; the umbrella can be taken out separately from its compartment without opening anything from above.
If it is difficult for someone to understand the patterns presented above, they will in any case understand how to sew a bag (for example, from an old jacket), a “T-shirt”, a bag using noble materials - suede, leather. However, jeans and leatherette will also work, it all depends on what choices you have.
DIY backpack bag with pattern
You better know what shape of the bag you prefer, what you wear (or are going to wear) inside, what handles you prefer - short, long, wide, narrow, or maybe it is generally more convenient for you to wear a backpack - this way your hands will be free. I personally love backpacks, but not too small - you can’t fit a lot in there, and women’s backpacks on sale are mostly all very modest in size, so sometimes you have to sew it yourself if you want to do fine sewing.
Cute bright owl will a great gift for a girl or girl. The main thing in this backpack is the external decor, but you can take almost any pattern, it still won’t be visible. Looks great with casual youth fashion, T-shirts and jeans. By following the link, you can see several slightly different color options.
Bag made from an old leather jacket
You can sew a new one leather bag from the leather of an old jacket (or leather trousers) - there are probably good unworn areas left on it. You might end up with something as handy as the one in the photo below.
It's a good idea to make some handles, which you can always make shorter or longer, or attach one long strap.
Think about the clasp in advance; if it is a zipper, then find one at home suitable color, if it is slightly larger than the hole, then this is not a problem - one end can be hidden inside the product. Think about what kind of buckles and magnetic clasps your future bag will have.
Selection of accessories
Usually, when I throw away an item (clothes or a backpack, it doesn’t matter), I evaporate any accessories from it that may still be useful, and that’s why I keep a lot of these little things at home. This is very convenient - you don’t have to immediately run to the store; if you come up with the idea of using accessories, you can immediately apply them and figure out whether something from your “home supplies” will be suitable. It is necessary to take into account the color of the fittings; the finished product will not look very good if silver and gold colored fittings are used at the same time. It's better to keep the style.
The clasp can be made with a magnet - there are some on sale and they are quite inexpensive. Or even on a cord that tightens the top. It looks good on beautiful evening bags made of silk or other exquisite fabric with a slight shine, with embroidery or beading.
I usually draw the bag pattern myself - the shapes are very simple. I sometimes collected ideas for models and patterns from the Internet; I never used them directly, but you can take them as a basis, and little things (both proportions, or separate height and width) can always be changed or added as you wish.
A product sewn on a lining looks neater, so prepare a lining fabric that matches the color - matching or vice versa in a contrasting color. The main details of the bag pattern will need to be duplicated on the fabric for the inside. On the lining, it may not be amiss to have one or more pockets, with a zipper or open, for small items, cosmetics, and a phone. Pockets are always very convenient when you know what should go in which pocket.
Knitted and felt bags with felt
If you don't know how or don't want to knit, you can still create your own knitted accessory. Do you know what? From unnecessary knitwear - pullovers, large or fine knit sweaters. Or use an old bag to transform it into a new one using knitwear.
A handbag can be sewn from felt in the shape of a wolf, owl or other animal. No pattern is required here, the main thing is beautiful design outside.
There are a lot of large pictures here with examples of felt handbags. Various animals and birds - fox, eagle, pig, elephant, dog, rhinoceros and even bat. The basis of the pattern is a rectangle the size of a phone or other device, and the rest is decoration - it’s a matter of your imagination and possibilities in terms of choosing the color of felt, thread or fabric.
Idea to repurpose an old leather bag with knitting
Very interesting idea- remake an existing old bag from thick leather - cut off the bottom and knit it from dense threads or yarn, for example, in a contrasting color. First make holes along the bottom, tie the knitted parts to them. I’ve been planning to implement this idea for a long time, I even have a bag for experiments, but I haven’t found the right yarn yet.
In my opinion, this is a “Spanish” idea for original bags made of thick leather with a knitted addition; it seemed interesting to me, naturally, for repeating with your own hands. So I took it into account.
The bottom can be tied very quickly using a thick cord. I would still knit the bottom part of a darker shape, otherwise it will be a washing problem very soon.
The shape of the pattern will largely depend on the rest of the piece. There is no need to worry about whether the sewing machine will sew through the leather part - we will make small holes with a special tool-punch and that’s it, you can fasten it. I think it’s still worth making a lining for such a handbag, especially if the knit is large.
Decorating a fabric handbag with beads and sequins
I would like to briefly touch on one more point. If you don’t like to bother with complex sewing of a bag according to a special pattern, or you already have a fabric bag (small!) that you would like to change, then there is also a way out. If there is no ready candidate for alteration, then sew a small handbag from fabric with your own hands. Or a clutch. It’s simple - the pattern is like this - two rectangles, a zipper or a button, or something else completely simple. Let the fabric be plain. For our purposes this is even better.
The trick here is that you can additionally decorate the bag with your own hands - the result will be a unique thing. In the end, buy the simplest one ready-made and try it. For this you will need beads, sequins, glass beads, rhinestones, threads, and a needle.
Decorating handbags and clutches with sequins and beads
Now I’ll show you what can happen. Don't be alarmed - these are three clutches standing next to each other. They are all interesting and all different.
Women's tweed bag - necessary thing on a trip. It is very roomy and practical to wear. Therefore, it is also good for everyday use in cool, windy seasons. A very interesting old pattern with a sewing pattern, let's try to sew it ourselves, the leather trim will look good.
These are some interesting multi-colored woolen knapsacks with embroidery, made by a craftswoman with her own hands, I spied at an exhibition of craftsmen self made. There were also cases for mobile phones, and even just roomy, but very light baskets and baskets made of felt for shopping trips to the store. Oddly enough, the hostess advised me to even wear potatoes in them! :) Personally, I wouldn’t do this - it’s a shame! And how light they turned out to be! Simply incredible.
It’s even easier to sew a spacious bag for the beach with your own hands, the patterns are very simple, and the sewing process is simple. The materials can be anything - from mesh to canvas, the shape and pattern can vary, but in any case the volume should be large. And you can decorate it however you like, even with seashells, or even paint it acrylic paints. Here you will find a bag-bag pattern, which you can use to sew a product made of fabric or even leather!
Another simple pattern for sewing a large, comfortable beach bag from a material (plain or patterned) that will fit all the necessary things. I don’t recommend making such a bag out of leather; bow folds along the top won’t look very good. The bag consists of an outer part and a lining, which can be the same or different, for example, a thinner fabric.
Examples of ready-made shopping bags, as well as handmade products with appliques from my good friend, a needlewoman, a jack of all trades, who lives in the city of Regensburg. This way you can decorate an existing item with your own hands, as well as sew a new one, inventing a decoration in the process.
Today it is quite difficult to be original. The range of products is so wide that it is sometimes very difficult to choose something unusual. That is why in this article we will talk about how to sew a bag from leather, and what should be taken into account.
Rules for working with leather
Initially, you need to know the rules of working with this or that material. That is why, before figuring out how to sew a leather bag, you need to know all the nuances and precautions in the work.
- To work on sewing machine you will need special needles. In some cases, you can also install a special foot (with a roller) for sewing leather products.
- For each product you need to be able to choose leather. So, for bags it should be extremely thick, rough-made. Only in this case will the product be able to serve its owner for a longer time.
- When cutting parts, remember that leather stretches differently.
- Throwing or pinning skin is prohibited. After all, marks remain on it, which then do not disappear anywhere.
- The length of the machine stitch when working with leather should be as wide as possible. After all, if you sew a bag with a fine stitch, the leather may simply tear (press through) in the stitching areas, which will lead to the product tearing.
- It is better to cut the leather not with tailor's scissors, but with a special shoemaker's or stationery knife.
- The edges of the leather are not overlocked. After all, they do not have the property of rolling.
- Standard machine fastenings are not applied to leather. To prevent the product from coming apart at the seams, the thread on the wrong side must be tied into a knot.
- It is important to remember that high-quality sewing of leather products is simply impossible without the use of glue.
Ironing the product
Sewing leather bags mandatory includes the process of ironing the material. There are certain nuances here:
- The leather is ironed from the wrong side.
- When ironing you should use low temperatures, steaming should not be used. Overheating causes the skin to shrink and become hard. It will not be possible to soften it after this.
- It is best to iron the skin, even from the wrong side, through gauze or a special iron. This way you can protect the fabric from damage.
If the material is ready for work, you can begin the sewing process itself.
Envelope clutch
Today it is a fashionable accessory that simply must be in the wardrobe of every self-respecting girl. In addition, making it yourself is quite simple.
To make a perfect leather bag with your own hands, patterns are a must. After all, it is much easier to create a product using a template than to sew it, as they say, by touch. In this case, the template is extremely simple: the design is based on a rectangle (its size is the size of the clutch). Next, you need to draw triangles in four directions from the sides. However, so that their edges do not coincide a little, they are wider (this is important, because when folding the clutch, things should not fall out of the bag).
Next, the product is cut out. At the next stage, holes are punched at the edges using a special device (a hole punch for fabrics). Three edges are folded to form an envelope. They are fixed with a rivet (threaded through the holes and secured on top with a round piece). The principle is something similar to a bolt and nut. The remaining piece of fabric is the “lid” of the bag, i.e. the part that will open in order to put or take something into the clutch.
Shopping bag
It is also extremely easy to sew this leather bag with your own hands. You don't even need patterns here. For sewing, you need two rectangular pieces of leather for the bag itself, two long narrow pieces for the handles. If you wish, you can make a lining.
At the very beginning, you need to sew two equal pieces of leather from the bottom and sides. This will be the bag itself. Next you need to prepare the handles. They are easy to make too. You need to fold a piece of leather in half, bend the edges of the handle into the middle so that everything looks beautiful on the outside. The handles can be initially glued with doublerin, which will significantly strengthen them. Next, they need to be stitched along the edge to secure them.
Then the handles should be sewn to the bag itself. To do this, the top of the product needs to be slightly bent into the middle. The handles are sewn a little along the length (to the top of the bag) and always along the width. In this case, threads for sewing can be chosen either to match the product or in a contrasting color. That's all. The leather shopping bag is ready!
Men's bag
The pattern of a men's leather bag can also be extremely simple. What does a guy need? So that the bag can fit a laptop or papers. That is why the technology for cutting and sewing such a product is also extremely easy.
The bag size may be slightly larger than A4. So, for this you need to cut out two corresponding pieces of leather. This bag will also have a slightly widened bottom and a sewn-in zipper. To do this, you need to cut out two narrow but long pieces of leather:
- on the bottom - a size slightly less than the sum of the three sides of the rectangle (the bag itself);
- on the top - slightly larger than the wide side of the bag (the lock will be located there).
You also need to prepare two narrow and long pieces of leather for the handles (guys rarely wear such bags on their shoulders, so the handle straps may not be long).
At this stage, you can sew all the parts together. So, first the bottom of the bag is sewn to one side, then to the other. The result is an almost finished cavity.
Now we have to work on the top. Initially, you need to sew a zipper into the strip. So, for this you need to first cut it in the center. When this is done, you need to fold the cavity of the bag itself, two handles (how to sew them is described in the previous version) and fold the top the way everything should turn out in the end. Since you can’t throw, you can first fasten everything from the inside with binders or loose clothespins (however, they also sometimes press hard on the skin and leave marks, it’s worth remembering). We sew a leather bag for a guy next. Now we need to fasten all the parts together. To do this, the product is turned inside out. You need to remember that in this case there will be difficult to pass places (where the handles are sewn on). So don't sew at high speeds. That's all. If desired, the bag can be decorated with pockets.
Barrel bag
You can also sew a “barrel” (leather bag) with your own hands. In this case, the following patterns will be needed:
- The first piece is the top part of the bag (two pieces - on either side of the zipper).
- The second detail is the bottom.
- The third detail is two stripes on the handles.
- Fourth - two side parts.
- Other elements: two fastenings, two connecting strips.
In this case, it is worth noting that the bag will be sewn not by machine, but by hand.
First step: handle straps
Let's figure out how to make a leather bag. So, initially you need to work with the straps for the handles. They can be pre-glued with glue, and only stitched on top with decorative stitching. If the work is done manually, the skin will first have to be pierced with an awl. The needle simply won’t pick up such fabric. The straps are initially sewn to the first part on both sides. First, you must remember to insert a ring into them, to which the handle itself will be connected.
Second step: sewing the bag
We next consider the production of leather bags. At this stage it is necessary to connect the first parts together. So, to do this, you should slightly bend the ends where the zipper will no longer be sewn. Now we need to attach the snake. So, it can also be pre-glued to the skin with glue. Next you should go through it with an awl and stitch it with thread.
Let's move on to the next step in the process of sewing a leather bag. Now you need to connect the finished top of the bag with the bottom. It's easy to do. You have to sew from the inside. If stitches of a contrasting color were laid on top, you will have to do the same along the bottom.
Step three: handles
When the bag is almost ready, all that remains is to work with the handles. So, they must be extremely strong in order to withstand the weight of everything that may be in it. This is why they can be strengthened by the skin itself. To make the handle voluminous, you can insert strips of used leather twisted into a braid or tube into the middle of it. Next, everything is stitched on the outside, first with a fastening stitch (you can also glue the handles with glue), then with a decorative stitch.
If desired, a lining can be inserted into the bag. It is sewn to the size of the bag, and after sewing it is glued in the middle so that the leather is placed on top of the lining fabric.
Stylish clutch
There is another option for sewing a clutch. In this case, you will also make a leather bag with your own hands. In this case, we will need extremely simple patterns. So, we only need to cut one rectangular piece of leather.
Initially, you will need to sew in a zipper. This is not difficult to do. So, it is worth noting that it can generally be glued. However, it is still better to “walk” along the top with a decorative seam, which will also secure it.
At this stage the bag is almost ready! Now we need to make an unusual bottom. To do this, the leather should be folded in the middle at the corners of the bag. It will look like the clutch has been cut off a little. These folds are stitched from the inside. The rest of the bag is stitched along the outside with decorative stitching. For beauty, you can also bend the corners of the product along the top, securing them with buttons. That's all. A stylish and unusual clutch is ready!
Decoration
Almost any leather bag can be very unusual and original. A master class on decorating - that's what we'll talk about now. So how can you decorate a leather product? There are several options here:
- Rivets, buttons. These are metal parts. They can be gold or silver in color. Nowadays such elements are in fashion, so you can safely decorate your product with them. They pierce the skin quite easily, as they have sharp ends that bend and lock the part in place.
- You can decorate leather bags with zippers. It looks very nice. So, you can take one half of a zipper with intact teeth and sew it along the contour of the bag. Alternatively, you can twist the zipper in a circle (spiral) and make a very unusual decorative element. It can be either sewn or glued.
- Applications. You can also decorate the bag with leather or suede appliqué. Almost anything can be depicted. The picture can be sewn or glued.
- Embroidery also looks beautiful on leather bags.
That, in principle, is all that can be used to decorate a leather bag. This is what will look stylish and original. The main thing to remember is that it is important not to overdo it with decorations. After all, too much is ugly. Everything should be in moderation.
Leather bag care
Having examined various patterns of leather bags, photos of finished products, finally it must be said that any item made of this material requires special care.
You can revive a slightly tarnished or faded leather bag with a soap solution. However, before use, you need to add a little ammonia to it. After treatment with this product, the bag is thoroughly wiped and rubbed until shiny with a soft cloth soaked in castor oil or glycerin. Next, apply a thin layer of colorless cream to the bag. After it is absorbed, the product is wiped with flannel.
An onion can also be a good way to refresh your bag. To do this, you need to take half of this vegetable and rub the product with the cut. This product also perfectly hides scuffs on a leather bag, minor scratches and cracks.
If the leather bag becomes shiny, wipe the area with a mixture of milk and baking soda. Preparing the solution is simple. Mix a teaspoon of soda in a glass of milk.
If the bag is made of suede, i.e. reverse leather, it also needs to be properly cared for. Such a product should be periodically wiped with a rubberized cloth or an eraser. You should not wash the material, as this will make it rougher. However, if necessary, the suede should be washed in a soapy solution, wiping it thoroughly after the procedure.
And, of course, it is worth remembering that today there are many different creams and sprays for skin care. They can be used if you want to extend the life of your favorite leather bag.
Different bags are needed, different bags are important. It is with this phrase that we can continue the theme of bags on our website, because girls try to carefully select this accessory for each of their looks.
The cross-body model firmly occupies a leading position in the ranking of the most comfortable bags.
How to sew a shoulder bag and according to what pattern? This is what our article will be about.
Pattern
Luggage with a shoulder strap may have different shapes: square, semicircle, rectangle. The following patterns will allow craftswomen to sew a model, taking into account their desires and preferences for the color of fabric, leather and other details.
You can choose a wide variety of materials for sewing bags: natural and artificial leather, jeans, corduroy, tarpaulin.
Clutches with a long strap look great in satin and velvet.
Model No. 1
Model No. 2
Luggage with one-piece handles. This pattern will make a good one beach bag. A big advantage when creating a model will be the absence of separate sewing of handles. One-piece handles are sewn simultaneously with the main parts.
Model No. 3
Using the pattern, you can sew a saddle bag from leather or leatherette. The style attracts attention with its folding part, to which you can attach a magnetic clasp.
Model No. 4
A cute clutch will allow you to keep all the necessary little things at hand if the girls have planned a walk in the park or a meeting with friends. The chain strap will make it stylish and impressive.
Model No. 5
The photo shows three styles of the product. Each pattern has its advantages.
- The shape reminds me of a banana sports bag, which is suitable for sports.
- The pouch with a cord strap consists of several wedges and a long shoulder strap. You can sew such a pouch with or without lining. In the first case, you should choose dense fabrics that will hold the shape of your luggage well. Any lightweight materials are suitable for a lined bag.
- The third option resembles a saddle bag. Its shape allows you to choose any finish: applique, patch, embroidery and other decor.
How to make a strap?
The strap allows you to carry your carry-on luggage over your shoulder. Everyone has long been accustomed to the fact that the length of the strap should be adjustable. So let's get down to business.
You will need:
- Belt material.
- Carbine.
- Non-woven fabric or felt (if the belt is made of leather).
The sewing steps are as follows:
- Cut the strap to the desired length and width. The width size is arbitrary, but the finished strap must match the width of the buckle. Take double the width of the belt when cutting. The buckle allows you to adjust the length of the belt.
- The length of the strap is taken taking into account the adjustment in the finished product.
- Cut the interlining to a length equal to the length of the belt and a width reduced by 0.5 mm. This will make the shoulder strap smooth and beautiful when sewing.
- Place the interlining inside the belt, fold the belt and machine stitch it.
- Now you need to insert the buckle into the belt for adjustment.
In the video you can see how to correctly insert such fittings.
- The carabiner allows you to unfasten the belt. If the luggage is made of fabric, the carabiner must be inserted through the ends of the strap and sewn. The bag must first have rings or small loops inserted into which the carabiner will cling.
- The carabiner should be secured to a leather belt using holniten. Insert the carabiner into the leather belt blank on one side.
- Fold the edge, punch a hole under the holniten and insert the part. Holniten can be inserted yourself using a machine or hammer. A bag repair shop will definitely help you solve this problem.
- The second edge of the belt is processed similarly to the first.
Using a leather belt as an example, you can sew a fabric belt. All the details are in the video.
How to install a holniten? All information in the video lesson.
How to sew a cross-body: master class
Crossbody has long been used by girls in everyday life. The sequence of all sewing operations on how to create a cross-body from fabric is broken down point by point.
To make a crossbody you will need:
- Textile;
- Pattern;
- Carbine;
- Threads;
- Magnetic button;
- Half ring.
The following drawings will be required:
- 2 rectangles, size 20x24;
- Belt: size 7x110 cm, short belt 7x10 cm;
- Valve: 2 rectangles (17x20 cm);
- Large internal pocket: size (20x17 cm);
- Small inner pocket (20x13 cm).
Let's start sewing:
- For pockets, process the entrance: fold the fabric 0.5 cm, then another cm. For a smaller pocket, fold the bottom edge.
- We sew the small pocket onto the front side of the large pocket and sew it in the center, you get 2 pockets. We fasten the sides of the pockets with basting.
- We pin the pockets with the wrong side onto the front side of the lining and baste.
- We fold the parts of the valve with the right sides inward and stitch them on the machine on three sides. We turn the valve inside out and lay a straight line along the edge of the part. Sew on one part of the magnet.
- Fold a long belt and two short ones in half and stitch by machine.
- We fold the lining face inward and stitch along 3 sides. Turn out the finished lining.
- How to get the bottom of the bag? We fold the bottom with a corner as in the photo (the bottom and side seams should be visible). We retreat 2.5 cm from the edge along the side seam, draw a straight line and sew along it.
- Trim off the excess fabric, leaving an allowance of 1 cm.
- Similarly, according to the 2 previous points, we create another corner. Leave the lining on the wrong side.
- We fold the main parts of the bag with the wrong side out and sew them together. The corners should be treated in the same way as on the lining, and the bag should be turned inside out.
- Assembling luggage: attach the flap with the outer side to the back wall of the bag, lay a basting at the top.
- Baste the main strap to one of the side seams. Fold the shorter belt in half and baste it to the other side.
- Pull the lining onto the base of the bag face to face, pin it together and stitch along the sides and bottom.
- Turn the product inside out through the hole left in the lining, iron it with an iron and machine stitch it in a circle.
- Insert the carabiner into the strap, decide on the length and stitch it.
- Lower the flap and make a mark for sewing on the second part of the magnetic button.
- Using hidden stitches, sew up the gap through which it was useful for turning the product inside out.
Clutch made of felt or felt
Women's fabric
All of the above models are sewn from fabric. Any material is inferior in practicality to products made from natural and artificial leather. But! There will always be events in life where the creation of a complete look will require feminine and original handbags, seductive pouches or attractive clutches for small change.
If girls have basic knowledge of sewing and certain skills, then, based on any master class, you can create a bag according to any pattern.
Bucket bag
Carry-on luggage is convenient to use for trips to hardware and grocery stores. To create a bucket bag, any thick fabric and lining will do.
Make the following cut on the fabric: 2 – main fabric, 2 – lining.
Next steps:
- Align the main part of the product with the lining, facing inward, and sew the handles on the machine. Use scissors to make cuts and turn them out. Repeat this step for the second wall of the product.
- Combine the two finished parts of the bag with the wrong side out, baste and sew on the machine.
- Use bias tape to close the open internal cuts.
A large collection of handbag patterns for girls will inspire them to create charming models with stunning finishes.
What woman doesn't dream about a stylish bag from a fashion store, or better yet, more than one? But constantly rising prices for bags do not allow this dream to come true. And even if you have the required amount, finding an exclusive, beautiful, and most importantly, suitable bag can take a huge amount of time. That is why many needlewomen prefer to make bags with their own hands, rather than running around many stores in search of that one and only one. How to sew an exclusive and stylish bag from pieces of leather?
To sew fashionable and stylish bag, you can choose any pieces of leather you like. And it is not even necessary to clearly repeat a certain model. Let the bag be original, emphasizing not only the individuality of its owner, but also the style of its creator.
Handmade bag– indispensable women's accessory, allowing you to create style and pay tribute to fashion. But, first of all, a bag is a useful thing in everyday life, because in it you can store various women’s things, bank cards, a diary, a wallet and much more that should always be at hand. It is not surprising that the development of services to offer new models of bags occurred simultaneously with the change in women's needs. As practice shows, popular models of leather bags have several compartments and are distinguished by high-quality material. Below you can find a master class with detailed description and a photo with the stages of work, with which you can sew a bag at home.
In this article we will talk about how to make bags with your own hands at home. After watching the master class, you will be able to make leather bags yourself ( patterns can be downloaded by clicking on the links posted under the photo of homemade bags).
PATTERNS:
DIY leather bags. Download patterns by clicking on the link. Pattern No. 1.
How to make a beautiful leather handbag. Download pattern No. 2 and make a bag.
We make leather bags ourselves. Download the latest pattern No. 3.
The most durable are bags made of genuine leather. Therefore, you should not throw away your old leather bag - it can still serve in another capacity. For example, its material can be used not only to make a “new” bag with your own hands, but also to create various crafts. It is not for nothing that processed leather was one of the first materials used by man. Moreover, leather is widely used in a variety of areas. For example, in everyday life you can find leather of various types, from tanned with natural fats or vegetable decoctions to processed with a combination of aluminum alum and table salt.
To create homemade women's bags, they usually use thick, rigid genuine leather. If a woman’s handbag, wallet or cosmetic bag is made of soft leather, then under it you will have to additionally put a denser base, for example, cardboard, thick fabric or the like To practice, it is better to make your first bag from leather from old boots, bags or outerwear. If you manage to make a handbag once, then you can sew a fashionable and modern women's bag again without much difficulty.
There are a huge number of options for bags that you can make from leather yourself. You can easily find suitable patterns and master classes on the Internet. And it doesn’t matter whether your bag is made in vintage or ethnic style, the main thing is that it will be unique and inimitable.
Now let's see interesting master Class- how to sew a bag from leather. You can sew such an original, extravagant handbag from scraps of leather with your own hands, but simple patterns can be cut out of paper into a checkered pattern, as shown in the photo in the master class.
As you can see, fashionable and exclusive leather bags are not so difficult to sew. Agree that in order to purchase a handbag in some boutique, made in the same style, you will have to shell out quite a round sum...