Paper balloons. Children's creativity craft - balloon Origami paper balloon
In our article you can find interesting crafts paper balls for all occasions. For example, you have a celebration at home, and you need to decorate the apartment. DIY paper balls are an excellent and inexpensive option.
All crafts vary in complexity from simple to unusual. Have a wonderful job and good mood.
First option.
In our master class we will show you how to create a festive paper ball with your own hands. To do this, we need a piece of white and always multi-colored paper, sharp scissors, and glue.
- First step. First, you need to print the template in duplicate (on white and multi-colored paper) using a printer.
- Second step. Then, of course, you need to cut it out templates and lay them out in the shape of a “sun”.
- Third step. Glue the cut circle into the middle, connecting all the rays in one place. Fourth step.
- Now let's move on to creating the ball. The color template is on white. Then we will connect the white rays with the colored ones.
- Fifth step. After this, it should look like white rays will lie on top of the colored ones, now they need to be hidden again under other rays.
- Sixth step. This is such a beautiful ornament that you can get if you intertwine different rays.
Seventh step. At the end, we will attach the rays and secure them together at one point.
How to create a paper ball with your own hands, master class
The second option is to create a ball with your own hands.
- Now we will figure out how to make a magnificent ball with your own hands from different papers. For this we need three sheets different shades, circle template, pencil, sharp scissors. Cut out four identical circles from one color, and do the same with other colors. You should end up with twelve circles of the same size.
- Let's add the circles in the order we need: two circles of the same color (for example, 2 blue), then put two circles of a different color on them (for example, 2 pink), after that, for example, two blue, and repeat in the same order. Then we bend them in half. You can put a thread in the middle if the ball needs to hang.
- We fasten the middle with a stapler in different places. Let's divide one semicircle into three equal parts. Apply glue diagonally to the top 1/3 of the circle.
- Then we glue it to the adjacent part. Then, with a new semicircle, we will also divide it into three parts and apply glue to the lower 1/3 part and connect it to the other. And thus, with all the semicircles, alternating, gluing all sides. This is how easy it is to get a chic ball, created with your own hands, which you can hang on Christmas tree or decorate your room with it.
Products in the shape of a balloon, master class
Crafts in shape look very cute balloons. They can be made from paper, felt and even a light bulb.
We often throw away unnecessary lamps, but we do it in vain, since we can make beautiful crafts from them.
Now we will figure out how to create balloons from different light bulbs.
For work, we will need the following materials:
- Unnecessary light bulbs.
- Paints for working with glass.
- Available materials for creating a basket.
- Threads.
First, the light bulb must be degreased, so that the paint lays evenly. Let's cover the light bulb with a background.
While it cools, you can make a basket. From paper, from corks - whatever your imagination can do. We will attach strings of a certain size to the basket. When the background of our product is dry, we need to complete the details. Let's connect the basket with the ball. You can make a loop on top of superglue or other glue to hang the ball.
Such balloons can also be created using knitting, stained glass and various improvised means.
Felt balloon.
It is quite simple to sew an air balloon from felt, but it looks very beautiful and impressive.
To do this we will need pieces of felt, a pattern, cardboard to create a template, thread and cardboard for the basket and, of course, sewing parts.
First, we will cut out 8 wedges according to the template, taking into account the allowance and one circle.
Then everything is simple: we’ll make wedges and a circle, turn the product inside out, fill the ball with cotton wool, decorate it with a basket and slings (threads).
The balloon is made of felt.
Decor with balloons.
Balloons have long come into our lives. They decorate weddings and other celebrations and give them as gifts. With the help of balloons, many make marriage proposals.
An unusual way to congratulate a person is quite simple. We need a big box wrapping paper, balls, which are inflated with helium. It is advisable that there is a present at the bottom of the box. Such a surprise is created before delivery. The required number of balloons is inflated and closed in a box. When the box is opened, the balls take off sharply!
You can make air balloons with your own hands, both for launching and for decorating premises in everyday life or for holidays. Conclusion. I hope that after our detailed article, you finally understand how to make balloons from different materials.
TOTAL
We bring to your attention a new resourceful idea in the origami style. Small paper balloons will not only decorate your interior, a good gift but children will also really like it. Making them is so fun that you can easily do it together with the whole family.
What do we need to make paper balloons:
1. Select the material for the workpiece. Better fit whatman paper, since ordinary paper will not give beautiful shape, and the cardboard will not be convenient for subsequent work.
2. We draw the pattern presented in the figure below on the material for the product and cut it out.
3. Let's start working on the ball itself. We need two identical pieces, which we place one on top of the other and begin to weave. To prevent the paper from flying apart during the process, we use paper clips, as shown in the picture. For convenience, we finish the weaving with small tongs, and secure the ends to the middle with glue, creating a beautiful outline at the bottom of the ball.
4. Cut out all the parts of the basket, glue them together and attach them to the finished part.
5. At the end of the process, the origami masterpiece can be painted, it all depends on taste, or you can first use colored Whatman paper.
If you connect several balloons together using fishing line and small, decorative, round-shaped sticks, you will get an interesting hanging carousel.
Perfect for creating such balloons, a large selection of sets and a rich color scheme, will make your aeronautical baskets unique.
To make the interior of your home stylish and original, it is not necessary to decorate it with purchased items. You can make decorations with your own hands - this will not only provide a pleasant and interesting pastime, but will also help create a festive atmosphere in the house with the right mood. At the same time, the color scheme of the holiday is thought through and exactly the decor that suits the given occasion is created. significant day. In addition, purchased jewelry is monotonous, and manufactured with my own hands- one of a kind.
One of the most simple solutions – paper balls . The technique for making these crafts is simple, it doesn’t take much time, and the cost of materials is low. And the paper balls look grandiose - they fill the entire space, amaze the imagination - it seems that it is impossible to do this by hand, the balls look so unhandicraft.
From the history of the appearance of paper balls
China is considered the birthplace of paper balls. Flying paper lanterns have been made there for a long time, they are very popular even now - they are launched into the air by placing them inside oil lamps. Glowing lanterns flying into the night sky and disappearing among the stars somewhere in the clouds illuminated by the moon are a fascinating sight. Chinese paper lanterns later inspired the idea of making paper balls. They began to decorate festive events in America and Europe.
Today, all over the world, there is a trend to create interiors with decor from... paper garlands, flowers and balls. Products made from multi-colored and shiny paper look elegant, fragile and weightless. It’s easy to decorate a room, because paper balls weigh almost nothing. In addition, paper is an environmentally friendly material that does not clog environment, it is recyclable, that is, use paper decorations promotes conservation of nature. In general, paper balls are one of the directions modern fashion in the design of festive and ceremonial interiors.
Types of paper balls
Paper balls are used to decorate rooms; they can be selected thematically according to the manufacturing method and colors. For example, multi-colored balloons are suitable for a children's birthday, and a wedding hall can be decorated with balloons in pastel colors. It is considered stylish to hang balloons of the same color in a room, but different sizes. Small paper balls can be used to decorate christmas tree. The technique for making paper balls is different, and they all look interesting in different ways.
Balls are made from:
- long strips of paper;
- paper circles;
- geometric shapes made of paper;
- from curled and folded paper;
- made of paper pyramids sewn together at the ends (in Japanese - “kusudama”).
You can also make a paper accordion ball and an “origami ball.” But first, it’s worth mastering the two most important ones on small balls. simple techniques– a ball made of paper circles and a ball made of paper strips.
Preparing for work
In order for the work to immediately begin to progress, you first need to stock up on everything necessary for needlework. You will need the following materials and tools:
- a pack of colored paper;
- double-sided tape or adhesive stick;
- satin ribbon;
- a sheet of thick cardboard;
- spool of sewing thread;
- scissors;
- sewing needle;
- stapler;
- compass (can be replaced with a cup or saucer and simply draw circles around them);
- for decoration - shiny sequins.
When choosing materials you need to pay attention to some things. When buying colored paper, you should look at the density of the sheets - they should be of medium density. If the paper is too thin, the ball may wrinkle or tear at the folds. Sheets that are too dense are difficult to bend neatly along the lines.
Regular colored paper can be replaced with corrugated paper - the ball will seem openwork and even more airy. Interesting crafts are obtained from colored paper “in silence” - this kind of paper is used to make cigarettes, it is very thin and transparent, for each element of the ball it will need to be taken in several layers. But the balls made from silence look very gentle.
Thick cardboard is needed to make a circle template (stencil). Having decided on the size of the balls, draw a circle of the required diameter on cardboard using a compass or saucer and cut it out. Using this blank, draw circles on colored paper.
A satin ribbon in making balloons is not a small thing at all, but important accessory, giving the craft a finished look. For small balls you will need a narrow ribbon. The color of the ribbon should be in harmony with color scheme ball.
Step-by-step instructions for making a ball from paper circles
- Take a few pieces of colored paper. It is important that they are colored on both sides, then the ball will look beautiful from all angles.
- Draw circles on paper using a pre-prepared stencil of the required diameter. Carefully cut out circles.
- There should be 48 circles - 12 circles of four different colors.
- Bend each circle in half along its diameter and stack them on top of each other.
- Using a needle and thread, sew the ball blank along the joint line with a tight stitch (you can simply fasten the circles with a stapler).
- The final stage is the most painstaking: all adjacent semicircles must be carefully glued together with an adhesive pencil (easier and faster - with pieces of double-sided tape). That is, to make it clear, if only two circles bent in half were glued together, then they would have to be glued to each other only in halves so that when you straighten them, you get a base of a circle with a vertical partition in the middle of a semicircle. And when gluing a ball of 48 circles, all circles must be glued with both halves and the neighboring halves. When the last two circles remain, the workpiece will look like a fan on a round base. When gluing the halves of these last two circles, the craft will automatically straighten into a ball.
- For a satin ribbon of the required length (there will be a loop from it - you can make any length, depending on where the craft will be hung), cut the edges with a sharp hot knife so that they do not unravel. The knife can be heated over the gas burner of a kitchen stove, in the fire of a candle or lighter.
Now all that remains is to straighten the workpiece so that the “petals” are spaced at an equal distance from each other. Make a hole in one of the “petals”, thread a ribbon into it and tie it with a bow or a neat knot. The paper ball is ready.
Step-by-step instructions for making a ball from paper strips
- Take several sheets of colored paper and cut them into strips 1.0-1.5 cm wide (if the ball is small, like Christmas tree decoration) along the length of the sheet.
- You can use paper of the same color, or you can take different colors - then the ball will turn out bright, cheerful and elegant.
- Take one strip and connect its ends to make a ring. Where the ends meet, you need to make an allowance and fasten them with a stapler or glue them with an adhesive pencil (you can use a piece of double-sided tape). It's easier to work with double-sided tape, but a glue stick is cheaper. It’s even easier to use a stapler, but in a small craft, the staples will be very noticeable and the ball will look sloppy.
- Take the second strip of paper, turn it into a ring in the same way as in the previous step, and pass it at a right angle into the first ring. Fasten both rings together with glue, tape or a stapler.
- Add ring after ring in the same way to form a ball.
- On paper strips Glue the sequins so that the ball swinging on the ribbon shimmers. As an option, you can cover the ball with appliqués, for example, if it is children's party, and the ball is large in size, with figures of cartoon characters.
- Thread a ribbon through one of the strips so that the ball can be hung.
Having mastered these two simple manufacturing techniques on small paper balls, you can move on to the real thing. creative work – how to make a ball larger sizes, try more complex techniques and decorate the interior of the house.
In addition to the fact that making paper balls with your own hands is an aesthetic pleasure, it also has practical benefits. Having taught your child how to make balls, you can leave him alone at this activity for two hours and do chores around the house. In addition, the lesson develops fine motor skills hands and children's imagination. And if you make balls with your children in preparation for holiday, then they will also feel their importance - after all, along with adults, they took part in preparing the general fun.
Children's creativity craft - DIY balloon
Games are an integral component for the normal development of a child. It is not necessary to buy a ball or dolls, because children even consider spending time together with their parents as a game. They are just at that age when fantasies and dreams are an integral part of their lives. Try making some crafts with your child. In this article you will learn how to make a papier-mâché balloon. The child will receive a sea of emotions and impressions from this process, and then will be able to play independently with the finished craft.
For children's crafts you will need:
— balloon;
— hand cream;
— a box of tea bags;
— colored paper;
- scissors;
- PVA glue;
- newspapers;
- glue brush;
- container with water;
- gouache paints;
- paint brush;
- wire or thread.
Stages of work on a balloon craft:
1. Take a newspaper or any paper, just not thick. We tear it into pieces, which we then soak in a container of water.
2. Take a balloon of any color. Inflate it and lubricate it with hand cream.
3. Place our moistened pieces of newspaper on the cream layer. We do this without glue and over the entire surface of the ball so that there are no gaps. We leave only a small area at the tail of the ball unpasted.
4. Now coat the entire ball with glue and lay out the next layer of paper. So we repeat this process 3 or 4 times.
5. Let the ball dry, preferably near a heat source. This will take approximately two hours.
6. While the drying process is underway, let's start making the balloon basket. To do this, take a tea box, cut off its lid and cover the entire surface with colored paper. If desired, the inside of the box can also be sealed or painted over.
7. When our ball is completely dry (all layers of paper should be thick), prime it with a mixture of gouache and glue. Let the child choose what color the ball will be.
8. After this, carefully pierce the ball. From the inside it will come unstuck from the newspapers.
9. The balloon can be decorated like a real balloon - with colored stripes or left plain.
10. Now we attach the basket to the ball.
like this creative crafts you can hang it from a chandelier or on a cornice in a nursery, and if it’s warm and there are trees in the yard, you can make a whole parade of balloons of all sorts of colors and sizes. Believe me, even the neighbors will not remain indifferent.
The children and I recently made such a balloon and, hot on our heels, made MK for those who will like it.
The time to make it (with cut out parts) is about an hour and a half, it all depends on skills and age. I did this for 7-8 year old children, they need the help of an adult.
You will need glue (PVA, stationery glue, Moment "Crystal" glues well, and in some cases a glue gun with hot glue is very helpful), 20 circles of paper, several strips of paper for a basket length = 4 x the length of the side of the basket (mine is 5 cm) + 1 cm for gluing and 1 cm wide, base for the basket (I have a 13x13 square of paper), ribbons, braid, at the end of production any decor - flowers, beads, rhinestones. Schemes for drawing circles and baskets are given at the end of the MK.
Let's start making a basket. We braid the edges of the basket with a paper strip in a checkerboard pattern. To prevent it from flying off, I secured it with a paper clip at the beginning, after weaving all the sides, we glue the tip of the strip (1 cm) to the wall of the basket and then in several places on each wall we glue the walls to this strip. Then repeat with the second strip.
We finish with the third strip, gluing all the protruding ends of the walls to the paper strip.
You can glue any braid, lace or ribbon to the edge. We take 4 wooden kebab sticks, wrap them with ribbon, fixing them with glue on the edges.
Let's start gluing the ball. Apply glue to the bent edge, fold two circles, matching the bent edges and fix it. In this way, we glue five circles so that the sharp vertices converge at one point. It turns out to be a hemisphere. Let's make another hemisphere. Then we glue a strip of 10 circles, directing the sharp vertices of the triangles alternately up and down.
We close the strip into a ring, gluing the outer circles, and then glue the hemisphere on top and bottom, folding the 5 remaining free edges of the hemisphere with the 5 edges of the strip.
This is what the ball looks like after gluing one hemisphere (photo above), then put on the top hemisphere and glue it. We get a ball.
Now assembly. Glue the skewers to the basket, fixing them with Moment or hot glue in the corners of the basket. The fastest way to glue the ball to the skewers is with a hot gun; we determine the gluing points by eye, leaving one of the tips at the top.
Then we start decorating - covering the places where the skewers are glued to the ball and the remaining holes in the places where the tops of the triangles are glued with bows or flowers or rhinestones; I glued a bead at the top. Add an inscription and flowers to the basket. The ball is ready. You can use it as a gift basket - put a small gift, candy or chocolate inside.
How to prepare circles for a ball. Here it is very important to make the correct markings for a neat appearance of the ball. Let's remember geometry and fit an equilateral triangle into a circle. How to do this: Draw a circle with a compass with a center at point O, take an arbitrary point D on the circle, measure the segment DO (the radius of the circle), plot the length of the radius from point D on both sides using a ruler so that the end of the segment lies on the circle (this will be points A and C) or draw a circle from point D with the same compass (that is, with the same radius), place points of intersection with the circle in both directions (we get points A and C). This will be one side of the triangle. Now from point C we draw a circle with a compass with a radius equal to the side of the triangle AC until it intersects with the circle (or we use a ruler to draw a segment from point C equal to the side AC, so that the end of the segment lies on the circle). This will be vertex B. Connect points A and B. My side of the triangle is 2.8 cm. We bend it up along the sides of the triangle. TO speed up the marking process, draw a triangle on one circle of thick paper, cut it out, then apply it to the circles (you can take one at a time or several at once, if the paper is not thick) and bend the edges of the circles, holding the triangle in the middle. Or we apply a triangle to each circle, trace it with a pencil and then fold it over. Or we take several circles, fold them into an even stack, put a circle with an inscribed triangle on top and at the vertices of the triangle with scissors we make small cuts all over the stack at once, and then fold the edges, guided by these cuts. This stage is the longest and most boring.