Knitting beautiful children's hats. Simple children's hat knitted
Knitted hats for newborns will definitely come in handy on walks, so you need to take care of purchasing them in advance. Although you don't have to buy it at all. If mommy has experience in crocheting or knitting, then it will not be difficult for her to knit a warm and beautiful hat for her baby. How to choose the right hat model for your baby?
Model selection
For a newborn baby, hats with ties that fit snugly to the head, cover the ears and do not contain seams are more suitable. If the model involves seams, then it is better to make them outward so that they do not rub the baby’s skin. A tight fit will ensure reliable heat retention, and the ties will prevent the hat from coming off even when the child is actively moving. The most successful models of hats for newborns are knitted caps, simple tight-fitting hats.
Successful models of hats for babies
Models without ties, such as caps or regular hats with pompoms, can also be considered as headwear options for babies, but they are less comfortable for both mother and newborn baby. But they look beautiful and are perfect for a photo shoot or for a baby who is already sitting instead of lying down during a walk.
Models that are suitable only for photo shoots or for babies aged 9-10 months
How to knit a hat for a newborn
"Owlet" is a very fashionable and comfortable hat for a baby.
Knitted hat for a newborn “Owlet”
The yarn calculation is given for a hat for a head circumference of 34-36 cm. The “elastic band” pattern that runs along the sides of the model stretches perfectly, so the hat will fit for a long time. Of course, in white, such a pattern is more suitable for girls, but using gray or brown yarn, you can knit such a hat for a boy.
Materials
- Yarn (100% wool) – 50 g.
- Colored yarn for finishing (eyes and beak) – 5 g (leftovers can be used).
- Knitting needles No. 2.
Schemes
Pattern "Braids". Scheme 1
Pattern 2. Needed for knitting “ears” so that the model covers the child’s ears
Description
1. First, knit the middle part of the hat with the “Braid” pattern. It must be knitted to a length of 24 cm from 37 initial loops (+2 edge loops). To complete the drawing, you must use the diagram and this detailed description:
The following rows are repeated from row No. 2 according to this description
2. Now you need to complete the side parts of the hat. The knitting method used is “Lush Rib”. The loops are cast on from the middle of the middle part of the hat (2 loops in each edge). In order for the owl to have protruding ears, in the last 5 edge loops you need to cast on 3 loops for knitting the sides. One row is a regular 2x2 elastic band. Next comes " fluffy elastic band"(purl loops are knitted purlwise, and knit stitches are knitted like this: the knitting needle is inserted into the loop of the bottom row and a new loop is pulled out, while the top one is discarded).
3. In order to keep the baby’s ears warm, you need to tie the “ears”. The “ears” are knitted according to pattern 2 (the length of the “ears” is 4 cm). Increases were made by 1 stitch per person. rows. Then decreases are made in the same way, also 1 loop at a time, so that the “eye” turns out symmetrical. If you want to make the “ear” longer, then you need to increase it by 2 loops.
As a result of your efforts, you should get something like this:
Advice: The master class does not use a pattern, but based on this photo it is quite easy to construct it on paper. It will be more convenient to knit a hat by applying work to it.
4. Next you need to sew a hat and crochet it in a circle using the “crawfish step” method.
5. Ties can be made in any way in a convenient way– knitting, crocheting, using ready-made cord or braid.
6. On the top of the hat you need to sew tassels made from the same yarn that was used for knitting.
7. The eyes and nose can be crocheted separately and sewn on, or they can be embroidered with a thick needle made of woolen threads suitable color.
The hat is ready!
Simple knitted hat for baby
The hat is knitted extremely simply; no pattern or diagram is needed. Calculations are given for a cap of 3-5 one month old baby.
This model is also suitable for a boy, if you leave it without decoration or decorate it with suitable embroidery or appliqué instead of a flower.
Materials
For the header:
- Soft yarn for children – 50 g.
- Knitting needles No. 3.
For the flower:
- Wool yarn – 20 g.
- Hook No. 5.
Knitting patterns
Persons smooth surface - faces. rows of faces are knitted. loops, purl rows - purl. loops.
“Elastic band” 1x1 – alternate faces. and out. loops through one.
Knitting density: 10 cm x 10 cm = 21 loops x 27 rows.
Description
- Knitting begins with a set of 65 initial loops. First comes 6 rubles. with an elastic band. Then 43 rub. persons satin stitch The hinges are closed.
- Now you need to fold the workpiece in half and sew the side and top seams.
- You can make a flower for a girl. To do this, crochet a chain of 60 air. loops First row - st. without a crochet. Next comes the “shell” pattern (five double crochets are knitted into every fifth stitch). At the end, the thread is secured and the knitted strip is folded into the shape of a rose. All that remains is to sew the flower to the hat.
The hat is ready!
Knitted universal hat for a newborn
Such a hat will be a good option for autumn, and if you add it with a warm fleece lining and choose 100% wool yarn, then this model will be suitable for winter.
The model is universal and suitable for a child of any gender
Materials
- Wool threads(it’s better to take two colors) – 50 g.
- Knitting needles No. 3.
Work progress
1. Cast on 70 initial loops (edge loops are included in this number). First, an elastic band is knitted (you can use 1x1 or 2x2). Six rows are knitted with an elastic band. Next, take threads of a contrasting color and knit two rows of faces. knitting.
2. Then comes the pattern, it is knitted according to the following description:
Step by step description for knitting the pattern of the main part of the hat
3. Now you need to make 10 decrease stitches and knit “teeth” that will decorate the hat. To do this, 6 rows are knitted. stitch, row of two stitches together. and one yarn over.
You get these “teeth”
You need to finish the cloves by knitting 5 rows of faces. satin stitch
4. To start the back of the hat, you need to make 8-10 decreases and knit the back of the head like the heel of a sock (knit only the middle, closing the side loops).
5. All that remains is to tie the strings (you can use a ready-made cord or braid).
The baby's hat is ready!
Front and back view of the finished hat
An easy-to-make classic hat for boys
Despite the fact that the model is positioned as a hat for a boy, you can use colored threads and decor in the form of a flower, bow or floral embroidery and knit a new thing for a little fashionista.
Comfortable hat for autumn-spring
Materials
- Woolen acrylic yarn(you can use a mixture of fibers) – 1 skein.
- Stocking needles No. 4.
Size
The model is designed for 6-9 months. The values indicated in brackets are for a child from one to one and a half years old.
Description
1. Work begins with 72 (84) initial loops. They must be connected to form a circular row. Mark the connection location with a marker.
2. Next, a 2x2 “elastic band” is knitted in the circle to a height of 2.5 cm from the beginning of knitting.
3. Then comes the pattern: This hat will suit a baby from birth
Materials
- Children's wool yarn – 50 g.
- Knitting needles No. 5 – 3 pcs.
Size
For babies from birth to 3 months. The child's head circumference is 33-35 cm.
Knitting density
5 cm x 5 cm = 8p. x 11 rub. (pattern “Front stitch”).
1. Main part. Knitting begins with a set of 44 loops. And then it goes according to the scheme:
- Row 1 (wrong side) – knits only. loops.
- Row 2 (front) – faces only. loops.
- Row 3 – purl only. loops.
- Row 4 – faces only. loops.
The next 4 rows repeat the sequence, and so on until the knitting becomes 13 cm. You need to finish on the wrong side of the faces. loops.
2. Making the back seam. In fact, the hat will be seamless, and the back seam will be knitted. To do this, the loops are divided equally into two knitting needles (22 pcs each). Now you will need a third knitting needle, with which the loops will be closed (the loops on the right and left sides are knitted together).
3. Ties. You need to measure three threads 97 cm long from the main yarn. Fold them together and thread them through the hole in the pattern along the edge of the cap on the right. Tie 6 ends into a knot - the tie is ready. The left tie is done the same way.
You can use the purchased lace as ties or crochet chains from air. loops and sew them to the hat.
The hat is ready!
Children's hats provide limitless space for imagination and creativity. Beginning needlewomen can start with simple models that can be decorated with additional decor and turned into exclusive items. Well, those who are well acquainted with knitting can take more difficult models with complex patterns of openwork patterns. In any case, things made with your own hands look original and carry a huge charge of love and warmth. Even more ideas in the article “Crocheting hats for newborns”.
Either spring is early this year, or the owners of children's stores are late... In general, I needed to buy something for my daughter hat, no longer warm, but not very thin either. It turned out that all the stores accessible to me had not yet delivered such a product. Well, what can I do, I had to remember where my hands come from and arm myself knitting needles. I chose a fairly simple pattern, not very dense and not very lacy, in general, just right for April windy weather.
Knitted demi-season hat. Master class
So, in my work I used stocking needles No. 1.5 (you can knit on circular needles, whatever suits you), yarn “Lucky Pekhorka”, color “violet”, it took about half a skein of yarn 250 m long, weighing 100 g, composition 50% wool, 50% pan volume.
To begin with, as usual, you need to knit a sample with the main pattern measuring 10*10 cm. Then be sure to wash and dry it. Measure the tightness of the knitting. For me it turned out to be 2.5.
Next, you need to take measurements (my princess is 2 years 9 months old, head circumference 49 cm), calculate the required number of loops: 49*2.5=122.5 loops. The repeat of the pattern I chose is 7 loops, so we round the number so that it is divisible by 7, the closest value is 126 loops.
Well, now that we’re done with the math, let’s get down to the fun part.
We cast on the knitting needles the estimated number of loops + one connecting stitch (i.e. there should be 127 loops on the knitting needles). We distribute them onto 4 knitting needles.
We close the knitting in a circle like this: we transfer the first loop from the left knitting needle to the right knitting needle, and with the left knitting needle we hook the last cast-on loop from below.
And remove it from the left knitting needle.
And we return the first one to the left knitting needle. Thus, we obtain a reliable ring knitting connection (it is important to ensure that the cast-on loops do not twist on the knitting needles before joining).
If you knit on circular knitting needles, you need to use a marker to mark the beginning of the row.
Abbreviations:
L - front loop;
And - purl loop;
LScross - front crossed loop.
Knitting an elastic band
All rows of elastic are knitted in the same way, namely: *2I, 2L, 2I, 1L Cross*, repeat until the end of the row.
We continue to knit until we reach the desired height (I have 4 cm = 14 rows).
We knit the hat itself
To continue knitting, you can take knitting needles a size larger, but I did not do this.
We knit with the main pattern according to Scheme.
Verbal description:
Row 1: *1I, 4L, 1I, 1L Cross*, repeat until the end of the row.
Row 2: knitted in the same way as the first (we’re lucky: all even rows will be the same).
3rd row: *1I, yarn over, triple broach (slip 1, 3L, then pull the first slipped loop through the three knitted ones), 1I, 1L Cross*
Photo (How to knit a triple broach)
5th row: *1I, 1L, yarn over, double broach (1 slip, 2L, pull the first removed through 2 knitted ones), 1I, 1L Cross*
7th row: *1I, 2L, yarn over, simple broach (slip the first one, knit the second one and pull the first removed loop through it), 1I, 1L Cross*
Knit the 8th row in the same way as the previous even rows and repeat knitting according to the pattern until the length of the product together with the elastic band is 15 cm (or be guided by the size of your child). I managed to knit the pattern only 5 times.
Now we will gradually reduce the number of loops, the even rows will no longer be the same.
Decrease
Rows 1-2: *1I, 4L, 1I, 1LCross* (I won’t write any more about what needs to be repeated until the end of the row, I think you already understand the meaning).
3rd row: *1I, yarn over, triple broach (we remove the first one, knit the second and third together like a knit one, knit the fourth and the first one through two knitted ones), 1I, 1L Cross*
4th row: *1I, 3L, 1I,1LSCross*
5th row: *1I, 1L, yarn over, simple broach, 1I, 1L Cross*
Rows 6-8: *1I, 3L, 1I, 1LCross*
Row 9: *1I, yarn over, 3L together (slip the first one, knit the second and third together, throw the first one over them), 1I, 1L Cross*
Rows 10-12: *1I, 2L, 1I, 1LCross*
Row 13: *1I, yarn over, simple broach, 1I, 1L Cross*
Row 14: *1I, 2L, 1I, 1LCross*
Row 15: *1I, 2L together, 1I, 1L Cross*
Row 16: *1I, 1L, 1I, 1LSCross*
Row 17: *Knit 3 together (we remove the first purl one, we also remove the knit one, we knit the third knit one, and then we throw the first one removed and the second one over it, while the middle knit one should be on top), 1L Cross*
Row 18: knit all
Row 19: *Knit 2 together*
There should be 18 loops left.
Crochet the thread through the remaining loops and pull the product together
Decorate as you wish. Here you can give free rein to your imagination: bows, flowers, beads, ribbons, brooches, etc. I didn’t try to be too clever, I knitted the most basic flower and added contrasting beads. Anyone interested can take a look at my diagram.
Scheme 2
Cast on 3 air loops, close them into a ring, and knit 10 single crochets on it.
2nd row: * 3 v.p., in the next st.b.n. make 2 unfinished dc, knitted together, 3 ch. to the next senior bachelor's degree previous row*, repeat 4 more times.
The result was a flower with five petals. Let's knit two more and sew them with beads to the hat.
Our spring hat is ready:
Every young mother is interested in knitting hats for children from 0 to 3 years old with descriptions and patterns. After giving birth to a child or even during pregnancy, you have to acquire clothes for a newborn or unborn baby. The key point here is hats for the little ones. They can be purchased, but it is much more pleasant to knit them yourself - this way the parents really care. Knitting hats for children from 0 to 3 years old is not so difficult - it is only important to choose the optimal model and learn the technique.
Newborn cap
Knitting for children begins with caps for newborns, which are required upon discharge from the maternity hospital in any weather - be it summer or harsh winter One standard model of knitted cap will do. The only difference here is the choice of yarn. For summer, it is better to choose cotton with acrylic or a special soft weave - it is important that the hat is soft. If we're talking about about winter, this means choosing 100% acrylic yarn - provided it is put directly on the baby’s head. Hats with added wool are worn only on the inner textile cap. Doctors themselves do not recommend wearing wool clothes on newborns - this can cause allergies.
Knitting a hat for children from 0 to 6 months is performed in the following sequence:
- Buy yarn - 100 grams of yarn with the volume of thread for knitting needles No. 3 is enough. Prepare knitting needles No. 3, you can take No. 4 - then the fabric will be loose and suitable for summer version.
- As an example, we will describe a knitted cap using knitting needles No. 3-3.5. Therefore, only 70 loops are cast on with yarn.
- For a better fit of the fabric to the head, knit 8 rows with a 1x1 elastic band.
- Next, switch to stocking or garter stitch and knit another 20 rows. Do not close the loops, but break the thread. The result will be a canvas for the oval of the child’s head.
- Now start knitting the back of the cap. Carefully divide the fabric into two parts using the second knitting needle. Transfer 25 stitches to the right needle without knitting. Attach a thread between the loops placed on the knitting needles for further knitting.
- Knit 19 stitches with the attached thread. Make a connection between the back and left side parts by knitting the 20th loop of the back part together with the first loop of the left side with a purl loop.
- Turn the work over and repeat the same method of connecting the parts. It turns out that only 20 loops of the back part are knitted, and the side loops are knitted like edge loops with purl loops.
- The rads are knitted in a similar way until there are 3 loops left on the side parts.
- The last 3 loops of the side parts are knitted using the same technique, only the loops of the back part are knitted 2 together according to the pattern - this is necessary to tighten the bottom edge of the hat for a newborn.
Finally, tie the ties for the hat. This can be done in two ways - crocheting or knitting. The ties are crocheted, catching the loops of the corners of the cap. After grabbing, tie chain loops with a hook and attached thread to the required length of the ties. Make a rise and knit one row with single crochets to the captured loops at the beginning of knitting. When finished, make a connection with the main fabric, tear off the thread and hide it.
If you don’t have any knowledge of crocheting, you can use the same knitting needles. To do this, use knitting needles to grab the same corner loops of the resulting cap. The optimal number of loops is 4, where 2 will be on the edge loops. 4 loops strung on knitting needles are knitted in garter stitch to the required string length. You can resort to knitting in stocking stitch - only in this case the ties will twist in a spiral due to the low density of the resulting “fabric”.
This technique with a standard description of hats for newborns, which can be used for knitting products for children under 1 year old. At older ages, slightly different models are used - more complex, but attractive.
Hat for a child from 1 to 2 years old
Hats for children under 2 years old may be more fashionable, but with the obligatory presence of “ears”. Such “ears” with ties are required to prevent the headdress from being taken off during a walk - children at this age refuse to wear hats, so a child sitting in a stroller can take off the hat immediately after putting it on again.
A standard hat for children under 2 years old with a description and diagrams can be found on the Internet. But for beginners, the following simple description of the headdress is offered:
- Take yarn with a gauge for knitting needles No. 3 or 3.5. Prepare knitting needles with the stated size and start knitting for the next example.
- Cast on 7 stitches on the knitting needles - 2 of them are edge stitches. Knit 26 rows in garter stitch, adding 2 stitches on each knit row. The addition of loops is carried out after the edge and before it by knitting from 2 loops - 3 loops. To do this, remove the edge, knit one loop, make a stretch of fabric between the two involved loops, knit the 3rd loop. This way you won't get the holes that are typical for adding holes. The result will be 33 loops.
- The resulting canvas is an “ear”. It is not removed from the working needle, the loops are not closed. Just move the fabric aside and knit a second one in the same way on the same knitting needle.
- The resulting “ears” are combined in the 27th row into one fabric - knit the first 33 loops, cast on 10 loops on the knitting needles, knit the second 33 loops.
- Knit with a turn in garter stitch. In each 4th row of the front row, make a standard increase in stitches. In the same way, add a total of 8 loops - make 4 additions in the fabric. As a result, there are 84 loops on the knitting needles.
- Now you should connect the ears with knitting the forehead line. To do this, knit the entire fabric - 84 loops, cast on another 16 loops, connect the fabric, getting rid of the edge ones by simply knitting loops.
- Next, the hat is knitted in the round - there will be only 100 stitches on working knitting needles. Knit in a similar way to almost the entire height of the head - it is better to measure directly on the child. Approximately 26-34 rows will be required.
- Subsequently, decreases are carefully made. To do this, knitted 100 loops are divided into an equal number of sections. For example, 100 loops can be divided into 10 sections.
- Decreases are carried out in the standard way - by knitting 2 loops together, knit or purl, as follows from the drawing and the selected knitting pattern. Carry out decreases at the end of each division into parts - knit together the last 2 loops of the part. Decreases are made in each front row, that is, after two rows.
- Decrease stitches in this way to the remaining 10 stitches on the knitting needle. Cut a thread 15 cm long from the ball and connect the remaining loops - stretch the thread cut from the ball through all the loops. Pull the thread so that there is no gap left between the loops.
- Hide the thread in the canvas. Additionally, make a pompom and attach it to the top of the head - this will further hide the gap between the remaining loops.
This is a simple standard knitting cap for children under 2 years old with a description. Knitting ties for “ears” is carried out in the manner described above. The model is suitable for beginners, but experienced needlewomen can use more complex knitting of hats for babies.
Hat for children 3 years old
Knitted hats for children 3 years old can be knitted without ties. There are many models of similar knitting, but it is enough to use more simple models for boys and girls.
Hat for girls
Knit your young fashionista a hat with imitation cat ears. Girls are simply delighted with the models presented, and mothers who are novice knitters will gain incomparable experience in knitting modern patterns.
So, take the thread and suitable circular knitting needles. Follow these steps:
The result is a ready-made hat for a girl, where cat ears are made at the end. Tie belts with thread for tying or use special threads with tassels for sewing and knitting. Grab the corners of the cap and tie them with thread at the same distance from the top of the corner to get ears of the same size. Make sure that the ears do not exceed the permissible size - otherwise, the finished hat will rise, as a result of which the child’s ears are constantly exposed.
You can knit a hat for a boy in a similar way. Only in this case, the cap is put on across - an imitation of a dragon's scallop is created, which was fashionable earlier and is popular now.
Boy's hat
You can provide a knitting cap with a description for a boy separately. For more simple option A standard cap without ties is used, which is decorated by experienced craftswomen using complex patterns on the main fabric. Braids work best for this, but you can decorate it using two contrasting threads to get a striped rainbow pattern.
Knitting a hat for a 3-year-old boy is carried out in the following way:
- Take a thread and suitable knitting needles, knit a sample, bring it to a “finished” state, perform standard calculations to determine the knitting density.
- After completing the calculations, start knitting - cast on the knitting needles the required number of loops.
- Knit 8-12 rows with 1x1 rib. You can use a 2x2 elastic band if the yarn is thin and you get a characteristic “ripple” on the elastic.
- Now move on to knitting the main pattern for the hat. The number of loops for knitting a hat should be calculated taking into account the repeat of the selected pattern. If garter or stockinette stitch is used, the number of stitches is determined only taking into account the density of the yarn and knitting needles.
- Having knitted the main fabric almost to the height of the child’s head, they begin to decrease the loops. To do this, the number of loops is divided into equal sections. If this is not possible, send most of it to the occipital region with a seam.
- Decrease occurs in each front row of the hat - at the end of each part, 2 loops are knitted together according to the picture. If you use simple stockinette stitch, decrease only at the back or front walls. It is important to create a neat knitting of the crown - let it create a characteristic “spiral” pattern.
- When there are 8-10 loops left on the knitting needles, a 30 cm long thread is cut from the ball. Make a join by pulling the thread through the remaining loops and tightening them at the end - taking into account the necessary absence of gaps between the loops.
- Sew the edge loops with a needle and the remaining cut thread. You can use a crochet hook by decreasing knitted fabric knitting needles
It is better to use a pompom as a decoration for such a hat for a boy - when attaching it, the loops on the top of the head will be additionally tightened. This model is often made striped, and during stripes with changing colors, a change in pattern is used. For example, the main fabric is knitted with blue thread and stockinette stitch. Add white stripes using garter stitch on the main fabric. The canvas will visually gather like an accordion, which looks interesting and attractive.
It is important to note that when using certain patterns for knitting hats, it is necessary to first knit the appropriate samples to correctly calculate the number of loops. Without preliminary calculations, you can make a mistake with the size and the product will turn out small. When knitting in the round, you cannot correct a mistake.
When knitting hats for children from birth to 3 years old, you can use the given patterns, technologies and descriptions. It is recommended to add your own imagination to standard knitting techniques in order to make your child an individual personality and just a happy person.
How to knit beautiful and simple hats for girls?
With the onset of autumn cold or spring thaw, a knitted hat becomes an indispensable headdress.
It is a well-known fact that handmade products are original and unique.
Cozy, unique, warm and beautiful hats can be knitted using ordinary knitting needles.
How to knit a hat with knitting needles for beginners for a girl?
In order for the work not to be in vain, the hat should not only be beautiful, but also be perfectly sized.
Therefore, we begin with an important stage - taking measurements.
Will provide effective assistance in this
Having decided on the size and calculating the required number of loops for the chosen style, we proceed to work.
You can start with a very simple but stylish hat with ears.
- Cast on the required number of loops
- We knit three centimeters of elastic: 2 front loops, one purl
- Moving on to the main fabric: one front, one purl
- Having knitted the calculated height of the cap, close the loops
- We break the thread
- We sew the model first from the back, then close the top
- Simple, fast and effective!
Knitted hats
Video: Knitting fashionable knitted hats with the “Braids with Shadow” pattern. Knitting lessons for beginners
Knitted hat for a girl with ears
A unique, bright, jacquard model is suitable for girls of any age.
Knitted hats
To create a finished product for a three or four year old baby you will need:
- 50 grams each of green and white wool
- Knitting needles No. 3.5
- Circular short knitting needles №№ 3,5
- Hook No. 3.5.
We use types of knitting:
- Facial surface
- Jacquard pattern - 16 loops
- We knit in stockinette stitch, changing the color of the wool, as indicated in the diagram.
Important: The non-working thread must pass freely along the wrong side of the fabric so that the finished product does not pull together.
- We start creativity from the arrow in the diagram
- We repeat, finishing a separate report, in accordance with the figure
Let's get to work.
First of all, we prepare the ears:
- Cast on 3 loops with green yarn for each ear
- Leaving the edges, we perform the jacquard pattern, distributing it starting from the center of the part
- In every 2nd row we add 4 x 1 loops according to the pattern
- Having knitted 11 rows, we finish adding
Having prepared two parts, we move on to the main part of the work:
- Cast on 37 stitches using green yarn on round knitting needles
- We further knit the loops of the first workpiece
- Cast on another 37 loops with the same yarn
- We knit the loops of the second ear
- As a result, we get 96 loops
- From the 13th row we perform a jacquard pattern in a circle, according to the diagram
Important: Place the drawing in the center of the front of the finished product, in accordance with the diagram.
- We knit 19 cm in this way
- Then we distribute 24 loops onto 4 ordinary knitting needles
Let's make a decrease:
- 1 row. We knit all the loops on three knitting needles, knit the last two loops together
- 2nd row. At the end of the second knitting needle we leave 2 loops, from which we remove the penultimate loop and pull the next one through it, from the front side
- Decrease each round until 4 stitches remain. We tighten them with the wool we used to work
We begin to collect the headdress.
Crochet green yarn:
- 1 row single crochet
- Row 2 single crochet from left to right
We make tassels from white thread.
Sew on the ears.
Another model in the trendy “little animals” theme.
Warm double knitted hat for girls
Video: Double cap with tourniquets. Knitting.
Winter knitted children's hats for girls: patterns and descriptions
Video: Knitted hat for a girl
Knitted earflap hat for a girl
Video: Knitting: a hat with ears with a braid pattern.
Knitting hats for teenage girls
Knitted patterns
To work you will need:
- 50 grams of dark blue (ink) and pure white skeins of 100% cashmere and 25 grams of black
- Knitting needles No. 6.5
- Hook No. 6
Ornament:
- Garter stitch
- Facial surface
- Color report on 30 loops
We knit:
1st row: 5th and 6th
3rd row: all 4th and 5th
5th row: 3rd and 4th
7th row: 2nd and 3rd
9th row: 2 - e
- After 10 rows, we complete the work by tightening the remaining loops with a working thread
- Sew the hat with a mattress stitch
- On the muzzle we embroider the eyes according to the pattern
The young lady will also like this stylish, sophisticated beret.
How to knit a hat and helmet for a girl with knitting needles
Helmets for babies
This comfortable and warm model Anastasia Warkentin describes in detail on the website
Video: Beanie-helmet with jacquard pattern
We knit a hoodie hat for a girl with knitting needles
A funny model with round ears will suit fashionistas of any age.
Original options.
Various hoods
Beautiful hat and snood for a girl, knitted pattern
Several videos will give accessible advice on how to perform such kits.
Video: Snood and hat knitted
Video: Knitting a snood pipe and a hat. Part 1: Snood pipe.
Video: Snood and hat. Part 2
Knitted bonnet hat for girls
Purple headdress
Video: Bonnet for girls
Video: Knitting a bonnet for a girl
Knitted beanie hat for girls
The trend model is not at all difficult to execute even when starting creativity for the first time.
- We work with the fifth number of knitting needles
- We knit the entire fabric in garter stitch
- We cast on fifty loops with an auxiliary thread
- We knit two rows
- We break the thread
- Take the main yarn and knit two full rows
- Now we round off the back of the head, shortening the rows
- We remove the edge, do one cycle, leaving the last 6 loops
We transfer the last unknitted loop to the right knitting needle, the yarn located under the left knitting needle, and transfer it on top of the left one.
We remove the loop back. We carry out this manipulation (wrapping) to avoid the formation of a hole between the loops.
Turn the canvas over.
- We don’t touch the first loop, then we work as usual
- We complete the row with a tight knit stitch. The result is the first row for forming the crown
- In all subsequent rows we twist the fifth, then the fourth, etc. loops
- When we knit six loops like this, we get a wedge consisting of 12 rows, narrowed towards the back of the head
- Consistently form 12 wedges
- Then remove the auxiliary thread
- We connect open loops with a regular seam
Fashionable "Beanie"
This unique product will fit sizes 54-56.
Video: Simple knitted beanie hat.
Hat for girls knitted with honeycomb pattern
Spring-autumn ideas
Thanks to the thick knitting needles involved in creative process, working on this exclusive will not take a lot of time. This results in a very warm and effective model.
For making a headdress standard size 50-52 cm you will need:
- Yarn, the composition of which is 98% wool and 2% polyester: one package each 90 m long, weighing 100 g, beige and brown
- A little bright orange thread
- Knitting needles No. 8,9
- Two orange buttons
When knitting with needles No. 9, knitting density:
11.5 loops for 24 rows we get a square of 10:10 cm
Main report: - Garter stitch
We do all the fabric with knit stitches
The exception is closed cycles, in which alternately: 1 circle - purl loops, 2 knit stitches
- Purl stitch
Purl loops in front positions
Knit - in purl
- Facial surface
Exclusively facial in closed circles
Let's get started:
- We cast on needles No. 8, brown wool, 49-55 loops. We knit three circles in stockinette stitch
- Take knitting needles No. 9 and using garter stitch make 11-13 circles with brown yarn and 4 with orange yarn
- Then we work with beige thread, knitting another 30 circles (12-13 cm)
- After which, we proceed to reducing the number of loops, first marking every 6th loop with a thread of a different color
- Now, in every second knit stitch we knit the marked loop together with the previous knit stitch. Repeat 5-6 times
- When the work is completed, there should be 8 loops left, which we tighten tightly with the working thread.
Let's move on to the design of the header: - Sew buttons on the side
- We make a pom-pom in any way and fasten it firmly to the top of the head
- If you have the skills, you can crochet a chain of air loops from beige yarn. Lay it out in loops, connect in the center and secure in the middle of the product
- Two packs of 50 grams of 75 m long llama wool yarn in gray and red-burgundy colors
- When working we use circular knitting needles No. 7, 8
- Standard elastic band
- "Scythe"
- First: we start with the edge, knit knit and purl in twos, six - cross to the left. At the same time, we hold three loops on a free knitting needle on the front side of the fabric, three knit stitches, then we knit the loops from an additional knitting needle, purl two, from “duplicate”, edge stitch.
- From the second to the eighth rows: knit according to the pattern, duplicate rows 1–8.
- We knit the stripes, alternating: eight rows in red-burgundy, the same number in gray.
- Using knitting needles No. 7, cast on 74 stitches with gray yarn
- We knit with an elastic band, leaving the edges, 12 rows
- Take the 8th set of knitting needles and work with the “Braid” pattern
- In the 3rd row we begin to follow the color sequence of the stripes
- We knit 26 rows in this way (about 16 cm)
- Then we take knitting needles No. 7 and make an elastic band, not forgetting to leave the edges and follow the sequence of colors of the striped pattern
- We decrease in the third (front) row, knitting from the “Braid” purl on each of the purl paths, combining 2 loops. You should get 56 loops
- Three rows follow the pattern
- After which we work knit on all front paths, connecting 2 together. We end up with 38 loops
- Continue according to the drawing
- Next, leaving the edge stitches, we combine 2 loops with a left slant: we remove one, as in knitting, and pull it through the knit stitch. We get 20 loops
- The purl row is done purlwise
- After that, we knit the front one, combining 2 loops, until there are 10 loops left. We draw them with the yarn we used
- We connect with any stitch
- Making a ball from used yarn
- We fix it on the finished product
New DIY creative ideas
For head size 58 you need to prepare:
Applicable drawings
The sum of the loops is a multiple of 12 plus 2 edge stitches.
We knit in rows:
We knit the entire fabric in two threads.
Let's get started:
Working with knitting needles and yarn brings not only the pleasure of replenishing your wardrobe necessary thing, but also provides an opportunity for an endless creative process.
Since a skilled needlewoman, when making any model, brings her energy, love and imagination, a hat knitted with her own hands will always distinguish the owner from the street crowd with her bright individuality and uniqueness.
Video: Hat for girls with woven pattern
Let's look at new models of children's hats, knitted with knitting needles, with diagrams and descriptions. The new models are knitted simply and quickly, and look very beautiful and stylish. They are suitable for both boys and girls of any age.
Green hat with arans
We offer to knit a new model of a stylish children's hat, knitted with knitting needles.
Boy's hat
To create it we will need:
- Yarn in green or any other shade as desired. On the sample it is DROPS MERINO EXTRA FINE from Garnstudio (belongs to yarn group B). The meter of these threads is 150 meters in 50 grams. You can use any thread with the same yardage. The cap will take about 100 grams.
- Knitting needles No. 2.5 and 3.5.
Now let's begin:
- On knitting needles No. 2.5, cast on the required number of stitches. Their number depends on the head circumference and knitting density. There are 112 loops on the sample. The cast-on loops must be a multiple of 16. Since this is the number of loops that is equal to the repeat of the elastic band.
- We make an elastic band as follows: 2 purl, 1 knit, 2 purl, 1 knit, 2 purl, 2 knit, 2 purl 1 knit, 2 purl, 1 knit. And we repeat this until the end of the row. We knit an elastic band 5-6 centimeters high.
- After the desired height of the elastic is knitted, we move on to the headdress pattern. We knit according to the pattern given below to the desired height, 15-19 cm, depending on the size.
- Now we carry out the decreases according to the scheme.
- Pull the remaining loops on the knitting needle and make a seam.
Knitting pattern
You can attach a pompom made of yarn or fur to such a fashionable headdress.
We make a pompom from threads like this: we wrap threads on a thick piece of cardboard or a ruler 3 or 5 centimeters wide; the more, the more magnificent the pompom will be. We stretch a piece of thread under the wound threads and tighten it tightly with a knot from one edge. Carefully cut the other edge with scissors or a stationery knife. We tie the resulting pompom with threads to the top of the hat.
Gray hat with a wide braid and a thread pompom
One more new model- this is a stylish and relevant today version of a children's hat, knitted with knitting needles, the description and diagrams of which are given below, suitable for a child of any age. To calculate the size and number of stitches cast on, you need to knit the sample, measure the head circumference and calculate the number of stitches we need.
PHOTO: Knitted hat suitable for boy and girl
To work you will need:
- Yarn. On the sample, these are DROPS AIR threads from Garnstudio (belongs to yarn group C). The meter of these threads is 150 meters in 50 grams. You can use any thread with the same yardage. You need 100 grams of yarn for a hat. The one in the photo is knitted in 2 threads.
- Knitting needles No. 4. You can use straight regular knitting needles or circular ones, then the hat will be seamless.
The knitting pattern for this product is very simple. First, we cast on loops and knit a few centimeters (5-6) with a regular 1*1 elastic band.
Next, we distribute them as follows: 22 loops of the central pattern with a braid and equally divide the remaining loops on one side of the pattern and on the other side. We will knit them in stockinette stitch. That is, if 90 loops are cast on and knitted with an elastic band, then after the elastic we knit 34 loops with knit stitches, then 22 stitches of the pattern, which we knit according to the pattern, and again 34 stitches with knit stitches.
Thus, we knit the cap to the desired depth. On the sample it is 18 centimeters. At this height we begin to decrease the loops. We knit all the loops stockinette stitch 2 each. We knit the central pattern like this: purl 2 loops together, purl 2 times and 1 purl loop, knit loops of the braid 2 together.
Knitting pattern
We knit the purl row according to the pattern. Next row knit 2 together again. The purl row must be knitted according to the pattern. And another row of 2 together. Then it remains to tighten the loops on the knitting needle with thread and make a seam at the back. If the hat is knitted on circular needles, there is no need to sew a seam at the back.
We make a pompom like this: we wrap threads on thick thick cardboard 4-5 centimeters wide, the more, the more magnificent the pompom will be. We stretch a piece of thread under the wound threads and tighten it tightly with a knot from one edge. Carefully cut the other edge with scissors or a stationery knife. We tie the resulting pompom with threads to the top of the hat.
For such a headdress you can knit a scarf from the same yarn. For the scarf, you need to cast on the knitting needles the desired number of stitches. In the sample from the photo this is 30 loops. Knit in stockinette stitch (knit stitches only, in both knit and purl rows) to the desired length of the scarf. Close the loops. Stylish accessory ready for the hat.
This set can be worn in spring or autumn. If you put the hat on a lining made of soft and warm fleece or knitwear, then it can be worn in winter.
Pink hat with thin braids
This new model is interesting and childish , knitted (the description and patterns of which are given below), is more suitable for girls. This hat with thin braids is knitted very simply, but looks gentle, interesting and unusual.
Knitted hat for girls
To knit a hat we will need:
- Yarn pink shade or any other at will. On the sample it is DROPS MERINO EXTRA FINE from Garnstudio (belongs to yarn group B). The meter of these threads is 150 meters in 50 grams. You can use any thread with the same yardage. The cap will take about 100 grams. It all depends on the size. We knit the hat in 2 threads.
- Knitting needles No. 4. You can use straight regular knitting needles or circular ones, then the hat will be seamless.
Let's start working on the hat. We put loops on the knitting needles in the quantity required by size. To calculate the size and number of loops cast on, you need to knit the sample with facial loops, measure the head circumference and calculate the required number of loops. We knit an elastic band 2*2 5-6 centimeters. Next we move on to knitting the pattern. We distribute the loops like this: edge loop, 3 purl loops, 2 knit braid loops, 3 purl loops and so on across the entire width of the cap, the last loop is an edge loop.
Knitting pattern
We knit a pigtail according to the pattern. It is done as follows:
- The first row is knit: we knit 1 loop of the braid, make a yarn over and knit the second loop of the braid.
- Second row, purl: all the loops of the braid, there are already 3 of them with a crochet, we knit purl.
- Third row, knit: knit three loops of the braid with knit stitches. Afterwards, we hook the first loop of the braid with a knitting needle and remove it, hanging it on the next 2 knitted loops. So we again get 2 loops of the braid and one makes an intersection.
- Fourth row, purl: knit 2 loops of the braid with purl loops. So we repeat the braid pattern.
We knit the hat to the required depth. On the sample it is 18 centimeters. Then we start decreasing. We decrease only the purl loops, and continue the braids according to the pattern.
In the first row of decreases we knit all the purl loops in the front row of 2. We do the wrong side as usual. For the second row of decreases we again knit purl loops of 2. And so on for another row.
Then we break the working thread and pull the remaining loops onto it. Sew the edges of the hat. We make a pompom like this: we wrap threads on cardboard, which should be quite dense with a width of 3 centimeters; the more, the more magnificent the pompom will be. We stretch a piece of thread under the wound threads and tighten it tightly with a knot from one edge. Carefully cut the other edge with scissors or a stationery knife. We tie the resulting pompom with threads to the top of the hat.
A stylish and interesting hat is ready. For her, you can also choose a fur pom-pom, made from artificial or natural fur arctic fox or raccoon.