Crochet hat turban patterns. How to knit a turban with knitting needles: description and diagram
Any thing has its own history, its creator and a lot of interesting things. The turban is a lovely headdress and it came from the Far East (turban). Movie stars appreciated the new trend.
Fashionistas immediately found a piece of their image in the turban and are ready not to part with it for a long time. Models can be with an open crown and a solid part. We will analyze in detail several models, what is needed to create them and how to choose the right materials.
The turban does not require special yarn. Usually the same yarn that you would choose to create a hat will be useful for it. Prickly varieties should not be used. The more wool it contains, the warmer it will be. Therefore, you just need to look at the composition.
As for the color. Then this headdress can be one color or contain smooth transitions. For example, created using the ombre technique. Very often the pattern for creation is English gum, so you can easily use two colors and make the English elastic band even more interesting. It turns out different colors rows. There are a lot of options for color combinations.
Next is the choice of knitting needles. It is important that the size is comfortable for knitting and suitable for the thickness of the thread. You can get advice in the store or read a small prescription on the balls themselves.
Sample
The turban is the same size as a regular hat. This is the head circumference and the depth of the product. Therefore, it is very important to calculate the loops correctly. Moreover, it is not so difficult to do it if you know.
For beginners, a drawing of how to cast on the first loops on knitting needles:
Steps for determining the number of stitches:
- knit a sample according to the pattern of the model’s fabric from approximately 20-30 loops to a height of just over 10 cm;
- put the ruler horizontally and counted how many loops fit into 10 cm;
- the ruler was placed vertically, and we calculated how many rows there would be vertically at 10 cm;
- we wrote down the result in the following form: 10*10=?(20)*?(20) - this is the knitting density and approximate numbers are indicated;
- solved a small problem (an equation with an unknown variable), where x is the unknown number of loops to cast on (if the circumference is 60 cm): x = 60/10*20 and x = 120.
These are approximate values that only show how to calculate stitches for a set of loops.
Step-by-step instructions for models
Using several models, we will analyze the most popular turban models and how to create a lovely product based on the pattern. The pattern can be changed at your discretion, but the pattern remains practically unchanged.
Turban with English elastic band
This casual model can easily complement a parka, jacket or down jacket. A step-by-step description of how to knit a soft and very comfortable turban.
The English gum makes this product very voluminous and appetizing.
To work you will need:
- yarn with 50% wool content;
- knitting needles number 4.
Sample
We measured the head around the circumference and determined the depth for the cap. Next, we knitted a small piece with an English elastic band and determined how many loops would be needed for the circle. It is better to count how many rows, since this model is assembled in a special way and you can further verify this.
Knitting stripes
If you look at such a model, you might be very surprised. After all, it’s just a stripe, very reminiscent of a scarf. Additionally, before knitting, you need to divide the depth into 2 parts.
After all, one stripe is a quarter of the entire hat. Next, pick up this quarter and knit a strip equal to the circumference multiplied by two. Additionally, you can add 3-4 cm to the clutch. We knit with an English elastic band until the required indicator and close the loops.
Assembly
The pattern shows how to twist the strip to get such a charming turban.
When unfolded, the unsewn part is just a long scarf. The diagram shows where the seams exist and where you need to tie a small clutch knot. Beautiful yarn and decoration will make a turban your favorite hat.
Important! The fabric pattern will be smooth and with straight edges if you knit it with an odd number of loops.
Such a highlight in a woman’s wardrobe can appear in just one evening. The product can be decorated to your taste. Beads all over the surface or a bright detail where the stripes meet.
Burgundy turban
A precious model and not that difficult to create. You can quickly do it in simple steps at home, listening to a couple of your favorite tracks in the evening.
To work you will need:
- burgundy yarn of medium thickness;
- knitting needles number 3.
Set of loops
To cast on loops and determine the length of the strip for the product, you need to know the depth and circumference of the head. The circumference must be multiplied by 2 and using the sample, calculate the number of loops for a double circle. The width of the strip is the initial set of loops. It is also easy to recognize - you need to divide the depth by 2.
Stripe
We knit a strip to the height of two circles.
Assembly
We assemble the product according to the specified pattern. You will need to make three seams (middle and two side).
This hat is decorated with small embroidery (beaded brooch). If you are a master of beading and embroidery, you can handle this too. You can buy ready-made option, no less beautiful than in the photo.
Turban for a beginner
The simplest model, which is popular among middle-aged women. The interesting thing is that the most common things are quite simple to create. This particular pattern can be easily mastered by a beginner knitter. It's easy knitted headband made with your own hands will give you confidence in your own abilities.
To work you will need:
- yarn gray 150 g (you can use baby pekhorka);
- knitting needles number 3 (circular or stocking).
It is better to knit in two threads. Make a set that matches the model's head circumference. Knit alternating knit and purl stitch in two rows. Knit to a height of 14 cm. Bind off the loops.
Then you need to knit a rectangle with sides of 10 cm and 3 cm using a tangle pattern.
Assembly consists of sewing together a rectangle (sew 3 cm sides). Place the base of the turban forward by stitching. That's it - the model is completed. It is very difficult to say how long it takes, but it is not measured in hours. 40 minutes and the popular hat is ready. You can decorate at your own discretion.
Three delicious models will help you make your own turban. This highly personalized piece will not only decorate your heads, but will also keep you warm.
You can make it with discreet jewelry, or you can create very rich versions with precious brooches. Some models are skillfully decorated by needlewomen with fringe and even satin ribbons. This is where the flight of imagination is not limited.
Recently, a turban or turban hat has been considered a fairly popular accessory among avid fashionistas. This type of headdress came to us from Eastern culture. For several decades he has been a leader in the fashion world.
A variety of shapes and models allow you to choose the right option. The main disadvantage of designer accessories is their high cost. We bring to your attention a master class on knitting a turban. Tips collected here experienced needlewomen who know all the intricacies of the work process.
Our material presents best ideas a turban that will help complement the look of any stylish fashionista. Modern materials allow you to turn any ideas into reality. Decorative details will complement the knitted accessory.
Varieties of turban
How to make a knitted turban? For this purpose they were developed detailed diagrams and patterns that will decorate the finished product. Recently, models made in the style of minimalism have been in particular demand. The simple pattern will be complemented by a beautiful brooch with inlaid crystals.
The main advantage of a homemade accessory is that it has a perfect fit and corresponds to the specified dimensions. As a result, it can be easily removed and put on.
A knitted turban can look different. The following types of woolen clothing are distinguished:
- classic look;
- Oriental;
- bandage;
- retro.
For each type, a specific pattern and description for knitting a turban is offered. They can be visually distinguished only by the number of knitted folds and the front part. Despite the minimal differences, this headdress has similarities between the models in terms of the knitting method.
For example, the oriental type is knitted in the form of a long fabric. Other types of headdress are knitted in the shape of a fan. After this, all parts are carefully sewn together. We offer a turban knitting pattern for beginners. Presented here detailed description workflow.
Simple turban model
Beginning needlewomen are recommended to start knitting with more simple options. Many models are made in the form of a single piece. Making a beautiful product in oriental style is quite simple. To do this, we will need instructions for knitting a turban with our own hands.
Before starting the work process, it is recommended to prepare the following materials and tools. For this we need:
- knitting needles No. 3 and No. 5;
- wool threads;
- scissors.
Knitting a warm accessory is divided into several stages:
- Calculation of loops. The width of the product will be 11 – 13 cm. To do this, we cast on 20 loops.
- Knitting elastic bands.
- Connection of all elements.
Knitting an elastic band takes place in several stages:
- The 1st row consists of alternating 1 purl and 2 knit stitches. So, continue until the end of the row;
- We knit the 2nd row and subsequent even rows in the same order;
- The 3rd row consists of 1 purl loop, which we knit along the back wall. Without removing it, we knit another knit stitch behind the front wall. Continue to the end of the row;
- We knit the 5th and 7th row as the 3rd.
The width of the elastic will be 5 cm. Next, we knit according to the pattern, but at the same time we add 6 loops in each row. As a result of this, the product begins to increase in size. Increments should be carried out evenly. They are made until the outer rows are made of 6 purl loops.
We knit the next rows to the end, then there will be 12 knit stitches along the edges. After this we knit 6 cm without any additions. Next we begin to decrease. On the front side you need to knit 6 times with 3 purl loops. To reduce the likelihood of the product skewing, it is recommended to alternate decreases evenly.
Then we divide each element of the workpiece into 11 loops. We continue to knit them up to 30 cm each part. As a result, we get a fan-shaped product. The final step will be to connect both parts of the finished product. To do this, we sew the two parts together.
After that, we move on to decorating the front part. Here we need a beautiful brooch with large crystals. We place it in the center of our product. In the photo knitted turban depicted best options accessory
Photo of a knitted turban
The history of the appearance of the turban and turban comes to us from the ancient culture of the eastern peoples. The general image of these hats has some similarity, but they are different items of clothing. A turban is a fairly large piece of fabric that is wrapped around the head. It is of considerable size and completely covers the forehead. A turban is a lighter version of a turban, while the forehead in this model remains open and has the shape of an angle. Since this product has become fashionable, it will be interesting to knit a turban with knitting needles. The knitting pattern for such a headdress is not very complicated.
Making a turban cap
A diagram and description of a turban with knitting needles is presented. This model can be used in two variations; it is worn on either side to the face. For a head circumference of 56-57 sizes you need:
- thick twisted yarn - 100 g;
- charcoal yarn for processing - 20−30 g;
- hook number 3;
- knitting needles No. 4.5.
On the knitting needles, cast on a number of stitches equal to 56 cm garter stitch and make a turban in the shape of a hemisphere, the height of which is 30-31 cm. So, first you need to knit 5 cm in a straight line, then reduce it along the loop on both sides of the work at the end of all rows along the length of 10 cm of the work being knitted.
Further reduce: first, two loops in all rows, initially 6 cm high; then three loops at the beginning of a row 6 cm high; then closing 4, 5, 6, 7, etc. loops in turn - in several steps. After there is 10-12 cm of product on the knitting needle, bind off the remaining loops at once in one row.
Lay the finished fabric of the product in half and sew starting from the top of the edge of the fabric. When sewing, make 3-4 folds or pull the entire seam tightly. Crochet the edge of the turban in a circle with six rows of single crochets (insert the hook under the far side of the loop of the previous row). Weave a cord from two bundles of threads of different colors, attach it along the side and sew its ends into the seam of the finished product.
Lush turban crochet
A diagram and description of the procedure for crocheting a chic turban is presented. To work you will need a hook number 3. The size of the product according to the head circumference is 64 cm.
During work, concave and curved stitches are used - embossed purl stitches and embossed knit stitches with double crochet: a concave (purl) stitch is knitted by clinging the thread to the back stitch from the bottom row when knitting, a curved (knit) stitch is knitted by clinging to the front stitch from the bottom row. This knitting gives the elastic structure. The following designations are used in the description of the work:
Job description:
Knitting a turban
A description of the work is presented on how to knit a turban with knitting needles. The scheme of work is simple. For this we need 120 g of yarn No. 3.03/2 in two layers, knitting needles No. 4. The following abbreviations are used in the scheme:
- Facial loop - LCP.
- Purl loop - IZP.
- Loop - P.
Pattern for the product: 1x1 elastic from removed short stitches. To knit a sample, you should dial an unpaired number of P:
- 1st row - 1 LCP., 1 IZP. etc.
- 2nd and all paired rows - IZP. remove, leaving the thread in front of the P.-mi, LCP. continue working on the drawing.
- 3rd row - repeat the work from the 1st row.
The turban consists of two parts: a border and a bottom. For the hem, cast on 19 stitches (=10 cm) and knit a ribbon 58 rows long (=28 cm). In the front row, the first 8 stitches must be removed, taking into account the outer one, and left on an additional needle behind the product. Next, knit the remaining stitches according to the pattern, except for the last one, which needs to be removed on an additional needle to the first half of the loops.
The first 2 stitches on the additional needle are those that were edge stitches. Knit them together IZP., remaining P. according to the drawing. Before the last P., add 1 more P. - thus, there are still 19 P. in the work. Having knitted another 58 rows (= 28 cm), close the P., sew the ends of the hem. To make the seam invisible, you need to make it kettelny. In this case, an additional thread will be useful to start and finish the work.
For the bottom, cast on 41 stitches (=23 cm) and knit 52 rows (=25 cm). Thread a thread along the longitudinal direction of the short sides of the bottom and tighten the fabric to 10-12 cm. Pin the bottom to the border so that the centers of the tightened sections of the bottom coincide with the seam and the movement of the loops on the border. On the wrong side, crochet the bottom and the hem.
Twisted ribbon
In the spring, when it is no longer very cold, but it is still too early to walk without a hat, by the way, you will need a lightweight version of the turban - a headdress in the form of a knitted ribbon. It is decorated with a knot in the middle, which makes it look like a turban.
To knit such a ribbon, you need to take 50 g of yarn (120m/50g). Knitting needles straight 4 mm. The abbreviations are similar to the previous scheme.
twisted pattern
The knitting density in the twisted pattern is 40 p. wide and 30 rows high form a square with a side of 10 cm. Drawing diagram:
- 1st row: 1 outer st., 1 st., * 1 st., remove onto an additional knitting needle while working, knit 1 lcp., then 1 lcp. from an additional knitting needle, 1 IZP.*. Repeat from asterisk to asterisk and move to the end of the row, ending with 1 extreme stitch;
- 2nd row: knit as P looks.
The picture is reproduced along the 1st 2nd row.
Job description
Cast on 12 stitches and knit 4 rows in stockinette stitch (LCP on the face and SP on the wrong side of the work). Then continue like this:
Product assembly
Connect the ribbon with a ring. Cast on 15 stitches and knit about 11 cm with a twisted pattern, then close all stitches. Place this ribbon around our product at the seam and sew on the reverse side.
Open headdress with brooch
An experienced knitter will cope with this work in an hour, and for beginners this is an excellent opportunity to practice, and medium-thick thread will only need from 30 to 80 g. Knitting needles No. 3.
We cast on 50 loops with any thread, but not the one from which we are going to knit, and knit 4-6 rows in stockinette stitch. Now we add the main thread and, without changing the pattern, knit the fabric in accordance with the size of the head circumference. We break the thread, add the one that was used to cast on the loops at first, and knit 4-6 rows.
Now we weave the extraneous thread and tie the open loops with a knitted stitch, forming vicious circle. We roll the edges of the strip inward. We tighten the strip with knitted tape, which we knit from threads of the same color. We decorate the trim with a brooch, button, bow, beads - whatever you like.
Attention, TODAY only!
The cold season is not a reason to neglect in a stylish way due to inclement weather.
The basis of a winter wardrobe is.
Jackets, fur coats, coats, shapeless down jackets will be transformed if you complement the look with an interesting hat.
The modern world of fashion demonstrates original versions of this element of clothing from season to season. One of the successful trends for a long time considered a turban hat.
The trend of Eastern culture has flowed into the lives of Europeans more than once. Each time it remained firmly in the first positions fashionable tops. Today, knitted turban is again popular.
Turban is the headdress of Eastern men. The owner's well-being is assessed by its color and material. Over time, women began to use it, complementing precious stones, decorations.
Historically, other names for the turban were formed:
- Amoma (imam) is intended for the highest clergy. Sheikhs and imams wear it.
- Dastor is a festive dress. It is used by representatives of the nobility and rulers.
- Futa is intended for the people. She dresses up as merchants, artisans, and ordinary city residents.
The hat is often called a turban. They wrap around the head almost identically. The length of the turban fabric is shorter, and its edge is even. This is the main difference between them.
In the photo there are knitted turbans and turbans:
Another popular name is sultana.
For the convenience of European fashionistas, designers have come up with ready-made hats of identical shape. They are made from different materials according to the season.
Type of turban | Peculiarities |
---|---|
Bandage | Easy to perform. Does not require high level skill from a knitter. To make it, you will need a minimum of actions: measuring the size of the head, choosing a pattern, calculating loops, and knitting density. |
Traditional turban hat | A more difficult option to implement. Covers the entire head. The set of actions for its manufacture is similar. Knitted in different patterns. In front is a traditional binding, knot. |
The turban went through a long historical path before its modified form was presented to us. Such a knitted product rightfully occupies a leading position in fashionable tops.
What you need for knitting, beauty creation
A knitted turban is a universal headdress. In addition to the winter season, it is worn in spring, autumn, even summer. The density of the product is regulated by the type of yarn, the size of the knitting needles, the knitting method, and the pattern. The quality of a hat largely depends on the tools used to create it. Choice the right materials– the key to a quality product.
Tool | Season | Recommendations |
---|---|---|
Spokes | Winter | A variant of a hat for cold weather is usually knitted from thick yarn. Its label always indicates the required thickness of the knitting needles. Usually they use No. 5, No. 6, circular. |
Spring, summer | For the warmer seasons, lighter versions are knitted from thin yarn. The knitting needles should be of a smaller order - No. 2, No. 3, No. 4. | |
Hook | Winter, spring, summer | It is used not only for manufacturing, but also for stitching the product. Select according to the directions on the yarn package. |
Yarn | Winter | Wearing during cold weather means that the clothing will be warm. For it, you should choose wool yarn with bulky threads. You can create original combinations. For example, add merino wool, alpaca wool, kid mohair to wool blends. This will provide additional warmth. |
Spring, autumn | In the warm season, thin cotton threads are used for production. For example, iris. The yarn must be of natural origin. |
Simple options for debutants
Some novice knitters are intimidated by images of the product, which creates the impression of a difficult task. Due to the imaginary level of complexity, they put off the knitting pattern, depriving themselves of the original headdress. There are a number of options that are very easy to implement. Even a person without much experience can implement them. It is enough to be able to hold the knitting needles in your hands, to know the front and back loops.
From a scarf
The simplest, but no less original version- a scarf turban. To complete it you will need:
- Paired knitting needles. A denser version can be obtained using No. 5.
- 2 skeins of thick yarn (50x50 wool with acrylic). You can add mohair and lurex for shine.
Legend:
- l – front loop;
- and – purl loop;
- n – yarn over;
- kr – edge;
- p – row;
- p – loop;
- ** - product repeat.
The main fabric is knitted with a classic elastic band. Cast on an odd number of stitches on working knitting needles according to the required size. Description of the header scheme:
- 1st row – 1 cr, *l*, 1 cr;
- 2nd p – *l, n, 1 p, remove onto a knitting needle (thread at the back of the work)*;
- 3rd row – *n, remove 1 p without knitting, k+n together*;
- Repeat the 4th p and subsequent ones according to the pattern.
In this sequence, knit approximately 90 cm. Then wrap the resulting scarf around your head, twisting it in the middle. Sew the loose ends to the fabric. Using a needle or crochet stitch, sew a seam in the middle.
For a tighter fit of the edge to the head, you can tie it with a crochet hook.
After completing the stitching work, the scarf hat is ready.
Easy way #2
Second easy way creating an original header, for which you will need:
- Knitting needles No. 5, No. 6.
- Thick yarn (wool, mohair, acrylic).
Legend:
- l – front loop;
- and – purl loop;
- p – row;
- p – loop;
- ** - product repeat.
Cast on an even number of stitches on the needles. How to knit with your own hands according to the pattern:
- 1st row: 1 cr, *4 l, 4 i*, 1 cr.;
- 2nd and subsequent rows: repeat according to the pattern.
It is worth following this sequence depending on the desired size. Then connect into a ring. Place the resulting product with the crossed ends up. Then sew them to the remaining fabric.
The video shows full version creating a simple knitted turbans:
With the addition of loops
For this model, thin knitting needles are used. The yarn is selected depending on what time of year the product is intended to be worn.
Scheme for 12 loops:
- 1st r: l;
- 2nd p: and;
- 3rd p: *1i; 2l*;
- 4th p and all even: according to the picture;
- 5th row: *cross 1 and 2 k to the right (knit the 2nd loop behind the back wall, without removing it from the knitting needle, and the 1st loop behind the front wall, remove it onto the second knitting needle)*.
Repeat repeat 8-10 rows (approximately 4 cm). Then start adding loops: in each front row between crossed loops, add 5 loops evenly. In this way, knit 28 rows (12-14 cm). Continue according to the scheme without increments. After 5 cm of fabric, start decreasing: in each purl row, knit 2 loops between the crossed ones. The remaining 4 cm strictly follow the diagram. Close knitting with any in a convenient way. The product is ready.
We use English gum
The main pattern for this is an elastic band of 4 purls, 4 knits.
Choose yarn depending on the season of wear.
The needle number will be indicated on the thread label.
The approximate volume of yarn is 200 g.
- Measuring head volume.
- Calculation of the number of loops. Divide the resulting volume in half. The result is the width of the header.
- Cast on stitches on working needles. Take into account 2 edges.
- Tie an elastic band of the required length.
- Close the loops.
The photo on the right shows what a turban hat knitted with an English elastic band might look like.
In order to form a turban from a knitted product, you should cross its ends, pull them back, and attach them to the main fabric.
Master class on how to knit an English-type elastic band:
Beautiful relief
simple relief knitting pattern
The pattern repeat should consist of a sum of loops that is a multiple of six. Without taking into account the edge ones, one more central one.
The canvas must be at least 10 cm wide.
After casting on the stitches on the knitting needles, mark the central thread of a different color.
After finishing knitting, remove the thread.
To create a high-quality product with embossed elastic, you should use some tips:
- 1st p (knit): 1 kr, *1 p remove without knitting, 1 i, 2 k*, 1 kr.
- 2nd r (purl) and all even ones: 1 cr, * remove 1 p without knitting, knit according to the pattern *, 1 cr.
- 3rd p (knit): 1 cr, *1 p removed unknitted, 1 and, 2 p crossed*, 1 cr.
- 5th row and all odd rows are knitted according to the pattern of the third.
After five centimeters of the canvas, it is necessary to make increases between reliefs.
To do this, five purl loops are knitted evenly in each row.
After adding, the side parts should have six loops, and the central parts should have eleven.
Then a uniform decrease is carried out.
Close the loops and sew the product.
From the picture on the left you can understand what the raised elastic band on the turban looks like.
The pattern is especially noticeable on light-colored yarn.
We bring different designs into reality
Bandage
One of the simplest options for a knitted turban for girls in this style.
You can knit it from any threads in the way you like.
One of the most interesting patterns is pearl.
After determining the width of the product and calculating the required loops, you can begin to work.
It is better to use circular knitting needles. This will reduce knitting time, as the process will be much more convenient.
The fabric is knitted in a circle of the required length.
After closing the loops, twist the product in the middle, sew with a needle, or crochet.
The bandage is ready.
The video describes in detail how to knit a turban-shaped headband.
Curvy shape
For a fluffy turban knitted, thick yarn with an additional mohair thread is best suited. Needles will be number 5. Knitting the main fabric is done with an elastic band according to the following pattern:
- Cast on the required number of loops. Knit 56 cm (approximately 100-110 rows). Bind off the loops, leaving a large thread. It will be needed to fix the product.
- Connect the resulting rectangle. It needs to be sewn in the middle. The elastic should not stretch.
- Sew the product with a neat seam at the top.
- Using a separate thread, collect the front of the turban. This will form a decorative knot.
- In order to assemble the edge of the hat, you need to use a needle and thread to sew a regular seam around the entire perimeter. Then tighten the thread.
Before assembling the fabric into a single product, it is steamed. Thanks to this, the edges are clearly visible, and the hat is especially fluffy.
With pattern
For beautiful pattern thin two-color threads are suitable: 45% wool, 55% acrylic. Paired knitting needles No. 5. The hat will be made of several shades of gray. Their alternation in a herringbone pattern creates an original headdress.
Picture describing the creation of a knitted turban:
How to knit:
- Row 1: cr, l, i, l, *knit in a pattern of 20 stitches*, l, i, l, i, cr.
- 2nd r: cr, i, l, i, *knit according to the pattern*, i, l, i, l, cr.
Then repeat rows 1-2 for about 50 cm. Remove the first color, add the second. Continue knitting. Once the required length is reached, the loops can be closed. To obtain the finished product, one part of the canvas is folded in half. The second is threaded inside the formed ring. Both ends are sewn together. The result is a spectacular version with a pattern.
Crochet
Turban made - great option for winter, autumn. It can be combined with clothes of different styles. The most harmonious version of such a headdress is knitted from thick yarn, crochet number 4. Depending on the chosen pattern, you can create several original hats.
Easy scheme
The chosen thread should be thick. The fabric is knitted from it like a scarf. Initially, you need to cast on a certain number of air loops. Standard set – chain 90 cm.
Legend:
- 1 tbsp - one single crochet;
- 1 tbsp s/n – one double crochet;
- 1 air p under – one air lifting loop.
How to crochet:
- 1st r: 1 dc under, 1 dc in each loop;
- 2nd row: 2 chains under, embossed double crochets;
- 3rd row: 2 chain stitches, raised double crochet stitches.
Then, for 12 cm, the second and third rows alternate. Afterwards, knit two rows with single crochets. Close knitting.
The product is sewn according to the pattern.
In the video there is a master class on crocheting a turban:
Openwork
Crocheted openwork patterns look very impressive and presentable. Their use is a modern version of winter clothing. The following guidelines should be followed when creating an original copy:
- Choice of threads, knitting needles. The yarn is selected to be of medium thickness. The hook will fit #4.
- The number of required loops is calculated.
- The air loops are crocheted.
- Knitting according to the pattern.
- After repeating the pattern, you should get a canvas 40-45 cm long.
- Then the knitting is divided into two parts with an equal number of loops. The work continues. The same pattern is knitted on each half.
- The product must be assembled. The crossed halves should be carefully sewn together at the edges. From the wrong side, use an invisible seam to grab them at the very base and fasten them together.
Crochet pattern:
Sew correctly
The knitting process is a labor-intensive task. This is only half the way done. An important point is the assembly of all parts into a single whole. For a quality cleaning job, you need to take the following steps:
- It's worth starting from the height of the cap. Cast it on the knitting needles. You will get 24 loops (for example). Then knit a row equal to half the circumference of the head.
- Divide the resulting loops into equal parts. The left side of the product should be removed onto an additional knitting needle and secured with a pin. TO right side add four rows of loops. Then swap the halves, returning them to one knitting needle. Knit left stitches.
- Complete row closure.
- After this, knit with the “English rib” pattern. After 8-10 rows, switch to regular stitches, alternating knit and purl stitches.
- Form the bottom of the hat. Knit two rows in stockinette stitch.
- Perform decreases. Knit several rows of loops together.
- Alternate regular knitting with decreasing stitches. As a result, there should be eight of them left on the canvas.
- Tighten the last loops with thread.
All parts of the garment should be steamed thoroughly before being finally sewn. During the stitching process, you can apply the semi-finished sample to the head, marking areas for seams. The amount of needle work depends on the holes formed during knitting. Ideal option A turban of average complexity has four seams: the middle one is horizontal, one vertical on the sides, and vertical in the middle.
Sometimes you will have to use the needle quite a bit. It is enough to fasten a couple of sections.
After the manipulations, the diligent knitter will be awarded an exclusive knitted masterpiece.
What to wear with: let's try to guess
A turban can suit business, casual, festive images. It will create an accent and become a highlight. Thanks to the variety of textures, color range, patterns you can create many options for any output. Hats in natural shades are welcome: beige, gray, brown, blue, green. The choice of color may depend on the time of year, event, mood.
A knitted turban is a warm, cozy accessory. It will fit perfectly into your everyday wardrobe. On a winter day it can be worn with warm jacket, fluffy mittens, comfortable boots. In spring, wear with a coat and high boots.
If you are planning to go to a special event, then an openwork turban with stones, a brooch or beads will perfectly complement the evening look.
Business negotiations in strict pantsuit and a nude hat will be a stunning success.
The color of the hat can be combined with outerwear, shoes, and other items of clothing. They may also differ from each other by several shades. This is a truly versatile headpiece. Original style, the decor will add a touch of oriental mystery to the chosen image.
In the photo different options combinations of a turban hat with other clothing items:
Turban is a historical trend. From year to year he appears in the shows of famous designers. Unique fashion accessory diversifies your wardrobe and surprises others with its originality.